I would appreciate it very much. You should be able to grab my
email address right from my profile.
Pear
--
Actually, the only thing the 3001BPro does differently than the 3021 (without the 'Pro') besides the 3001 having a lesser max height, is the lateral/horizontal positioning of the center post & I don't think the 3021 (without the 'Pro') has that ability... I don't even remember mine comming with any instructions... Just a sheet with warnings & a 'Thank You' for choosing Manfrotto.... However, the pistolgrip head had rather elaborate 7 frame illustrations on how to mount it to the legs & a camera to Quick Release Plate & then that to the grip....
For the legs, generally:
Don't use below -22f or above 140f degrees,
dry after use in the rain, not suggested for salt water conditions,
do not leave in the sun for extended periods, such as under glass in a car,
clean with mild detergent & soft cloth,
remove camera while transporting,
do not exceed max load spec.,
engage all safety locks & devices when applicable,
do not leave unattended where the general public could be endagered,
regular Lubrication not needed but when required use standard oil or grease & finally,
Should the product become defective, return to authorized Manfrotto service agent..
That's pretty much it...
--
The Amateur Formerly Known as 'UZ'pShoot'ERS' 'Happy Shootin'
*
[email protected] *
http://www.pbase.com/rrawzz * EffZeeThreeZero / CeeEightZeroEightZeroDoubleUZee / CeeTwoOneZeroZeroUZee / EOneHuderedAreEss
) 
