Noob with Zf dials, help please

[vegetaleb]

So I finally made the jump from the X-T5 to the Zf.

Really nice camera, but when I turned the shutter speed dial to 1/3 step and the iso dial to C, they are locked!

How can I unlock them?

 

[Jeff Biscuits]

How can I unlock them?

Press the pin in the middle of the dial while rotating the dial.

 

[sirhawkeye64]

So I finally made the jump from the X-T5 to the Zf.

Really nice camera, but when I turned the shutter speed dial to 1/3 step and the iso dial to C, they are locked!

How can I unlock them?

Press the button the dial and rotate the dial. It only locks in the "C" position on the ISO dial and the "1/3 stop" position on the shutter speed dial. Otherwise it move freely without needing to press the button again. I don't really like the dial locks myself, but it is what it is.

Second, i would strongly recommend reading the manual if you haven't done so yet.

--
PLEASE NOTE: I usually unsubscribe from forums and comments after a period of time, so if I do not respond, that is likely the reason. Feel free to PM me if you have a questions or need clarification about a comment I made.

 

[Jeff Biscuits]

It only locks in the "C" position on the ISO dial and the "1/3 stop" position on the shutter speed dial.

And the X, T and B positions on the shutter speed dial.

 

[vegetaleb]

Thanks both

I felt so noob lol, with Fuji we can lock the dial by pressing the central button that's all, no settings that autolock, it doesn't bother me now that I know, I prefer to control SS with a custom knob, though I like to use the ISO dial

--
My shutterstock https://www.shutterstock.com/g/jeffmerheb
My Flickr https://www.flickr.com/photos/147690104@N02/

 

[Jeff Biscuits]

I felt so noob lol, with Fuji we can lock the dial by pressing the central button that's all, no settings that autolock

The early Fujis such as the X-T1 and X-Pro1 work similarly to the Zf