driver windows me

yones

New member
Messages
1
Reaction score
0
Hi;

the 4700 fuji camera was working ok with win 98. However, it dose not work with windows me for some reason. I tried some liks, but I could not find the driver for it. Could some body please tell me where to find the driver for it.

Thanks
Yones
 
Hi;
the 4700 fuji camera was working ok with win 98. However, it dose
not work with windows me for some reason. I tried some liks, but I
could not find the driver for it. Could some body please tell me
where to find the driver for it.

Thanks
Yones
Sorry I am unable to help you. But even though this will not directly effect me (I have the 6900) If you find the drivers [or other solution] could you post the location (or solution) since others may be having the same problem.
 
Hi;
the 4700 fuji camera was working ok with win 98. However, it dose
not work with windows me for some reason. I tried some liks, but I
could not find the driver for it. Could some body please tell me
where to find the driver for it.

Thanks
Yones
Yones, I had this problem. Go to 'search'. Type Re:4900 failure to download to windows 2000MEFred. This should provide you with the post which solved my problem.
Regards
Fred
 
The Fuji Canada site has all the drivers for the different cameras. The link to the page is http://www.fujifilm.ca/index.asp?FRAME=HELP%5FDOWNLOADS%5FWINPAGE%5FCAMERAS&FFID=751901%2E649544895

http://pbase.com/galleries/ronhep
Hi;
the 4700 fuji camera was working ok with win 98. However, it dose
not work with windows me for some reason. I tried some liks, but I
could not find the driver for it. Could some body please tell me
where to find the driver for it.

Thanks
Yones
 
http://www.fujifilm.ca/index.asp?FRAME=HELP%5FDOWNLOADS%5FWINPAGE%5FCAMERAS&FFID=751901%2E649544895

http://pbase.com/galleries/ronhep
Hi;
the 4700 fuji camera was working ok with win 98. However, it dose
not work with windows me for some reason. I tried some liks, but I
could not find the driver for it. Could some body please tell me
where to find the driver for it.

Thanks
Yones
Hi Yones,
This was the solution provided by Terry that cured my problem.

Insert the 4900 dvr dc and go to the following dir :\usbdrv\win98\uninst\unin_fum.exe and press enter to run this programme which will remove any drivers already installed.

Next connect your camera and switch it on this will bring up the Windows installation wizard for your new device, when it asks for the dvrs location brouse and point to :\usbdv\win 98\usbs04cb.inf.
Click ok and the drvs will load.

Turn off the camera and restart the computer then switch the cam back on after the computer has fully loaded. This will bring up the Winme camera wizard which loads your images from the camera.

This solved my problem when I tried to load my 4900z onto a Sony Vaio lap top with Win 2000 ME.

Best of luck
Sincerely Fred
 

Keyboard shortcuts

Back
Top