Reading mode: Light Dark

Capture NX v 1.3.4 available at NikonUSA site

Go to last post
I just looked, and I only see 1.3.3 still there, for Windows. (Service & Support, Knowledgebase, 'What are current versions of ....'
 
PHXAZCRAIG said:
I just looked, and I only see 1.3.3 still there, for Windows.
(Service & Support, Knowledgebase, 'What are current versions of ....'
Click to expand...
Thank Lil for the heads up. It's here:

Windows:

http://support.nikontech.com/cgi-bin/nikonusa.cfg/php/enduser/std_adp.php?p_faqid=15961&p_created=1215902580&p_sid=LoQhVQ8j&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NjksNjkmcF9wcm9kcz00MiwyOTgmcF9jYXRzPTAmcF9wdj0yLjI5OCZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfcGFnZT00&p_li=&p_topview=1

Mac:

http://support.nikontech.com/cgi-bin/nikonusa.cfg/php/enduser/std_adp.php?p_faqid=15962&p_created=1215903718&p_sid=LoQhVQ8j&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NjksNjkmcF9wcm9kcz00MiwyOTgmcF9jYXRzPTAmcF9wdj0yLjI5OCZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfcGFnZT00&p_li=&p_topview=1
 
--
'I know not with what weapons World War III will be fought,
but World War IV will be fought with sticks and stones.'

Albert Einstein
 
Thanks.
 
LilKnytt said:
I'm sure I'm not the only one who'd like to not have to pay for the
NX2 upgrade.
Click to expand...
K=K+1 Lil, and very happy to know NIK sotfware works in NX1 too
LilKnytt said:
Lets hope this version works. I will test it out later.
Click to expand...
Did you see the new modes Portrait and Landscape Picture Control utility?
http://forums.dpreview.com/forums/read.asp?forum=1039&message=28631279
LilKnytt said:
Lil :-)
--
My ever growing gallery, can be visited by friends & family at

http://lilknytt.zenfolio.com/

Click to expand...
--
Regards, Alejandro.

 
--

'Our deepest fear is not that we are inadequate. Our deepest fear is that we are powerful beyond measure. It is our light, not our darkness that most frightens us. We ask ourselves, who are we to be brilliant, gorgeous, talented, fabulous.

Actually, who are we not to be?'

--Marianne Williamson

http://www.pbase.com/romansphotos/
 
Alejandro Daz del Ro Fery said:
K=K+1 Lil, and very happy to know NIK sotfware works in NX1 too
Click to expand...
That's great. Oh "Little One" is here right now. I've just hand fed her a few peanuts & put the rest in the tree. She's in great condition since second set of pups. Not seen them yet. May be a while before she brings them over. She has to cross the dog run to make it to the tree. She will want to make sure the pups can make the crossing before she brings them over.
Alejandro Daz del Ro Fery said:
Did you see the new modes Portrait and Landscape Picture Control
utility?
http://forums.dpreview.com/forums/read.asp?forum=1039&message=28631279
Click to expand...
No, I haven't checked that yet. Also, I'm working on Terns in flight right now....

But I'll check for it.

Lil :)

--
My ever growing gallery, can be visited by friends & family at

http://lilknytt.zenfolio.com/

 
LilKnytt said:
Alejandro Daz del Ro Fery said:
K=K+1 Lil, and very happy to know NIK sotfware works in NX1 too
Click to expand...
That's great. Oh "Little One" is here right now. I've just hand fed
her a few peanuts & put the rest in the tree. She's in great
condition since second set of pups. Not seen them yet. May be a while
before she brings them over. She has to cross the dog run to make it
to the tree. She will want to make sure the pups can make the
crossing before she brings them over.
Click to expand...
Lovely.
LilKnytt said:
LilKnytt said:
Did you see the new modes Portrait and Landscape Picture Control
utility?
http://forums.dpreview.com/forums/read.asp?forum=1039&message=28631279
Click to expand...
No, I haven't checked that yet. Also, I'm working on Terns in flight
right now....

But I'll check for it.
Click to expand...
They are the modes (portrait and landscape) that you have in the D200, but now, to install them in your D300, ViewNX 1.1.0 and CaptureNX 1.3.4
LilKnytt said:
Lil :)

--
My ever growing gallery, can be visited by friends & family at

http://lilknytt.zenfolio.com/

Click to expand...
--
Regards, Alejandro.

 
Brooke A said:
Did not work with my version in Canada - came bundled with D300.
"Different Region?"
Click to expand...
The (Mac) updater didn't recognize my installation of Capture NX 1.3.3 so I uninstalled it and re-installed CNX 1.3 from the bundled CD. I then re-ran the 1.3.4 updater and updated successfully.
 
 
yoni cozac said:
The us site says it does, but on the same site - the Leopard
compatibility page says only Capture NX 2 supports Leopard.

On the other hand, the asia site says it doesnt support Leopard:

http://nikonasia-en.custhelp.com/cgi-bin/nikonasia_en.cfg/php/enduser/std_adp.php?p_faqid=5979&p_created=1214990767&p_sid=Hy*s_V8j&p_accessibility=0&p_redirect=&p_lva=507&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NTgmcF9wcm9kcz05MSw0MDgmcF9jYXRzPTAmcF9wdj0yLjQwOCZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfcGFnZT0x&p_li=&p_topview=1

I'm confused..
Click to expand...
Don't be. The non-compatibility issue never bit me when I was using any version of 1.x.x under Leopard and I never lost any sleep (or images or anything) over it. :-)
 
You must log in or register to reply here.

Keyboard shortcuts

f
Forum
m
My threads
Mobile site
About
Editorial content
Cameras & Lenses
Community
All content, design, and layout are Copyright © 1998–2025 Digital Photography Review All Rights Reserved.
Reproduction in whole or part in any form or medium without specific written permission is prohibited.
When you use DPReview links to buy products, the site may earn a commission.
©GPS Media - Guides, Products, Services.
Back
Top