-
Welcome to the new forums! Please read this first. For known issues we are working to resolve, click here.
E-1 Flash info needed
- Thread starter sam12
- Start date
I have been given part number FLCBo5 as an off camera shoe cord. Does that sound correct?
Anyone?
Joseph Edward Forks
Senior Member
Thank you for that confirmation!! I knew I could count on someone on the forum. Oly users are the best!
Andrew Harvey182872
Member
- Messages
- 10
- Reaction score
- 0
Hi Sam,
You are correct that the SCA3202 M3 is the adapter for the Metz flash on the E1. This adapter has only just been released and I have been trying to track it down in the US. I have e-mailed the distributors but so far have had no replies.
If you can track down a supplier then please post it here as I am desperate for one of these adapters also.
Andy.
You are correct that the SCA3202 M3 is the adapter for the Metz flash on the E1. This adapter has only just been released and I have been trying to track it down in the US. I have e-mailed the distributors but so far have had no replies.
If you can track down a supplier then please post it here as I am desperate for one of these adapters also.
Andy.
I will do my best to find the adaptor and post as soon as I do. Thanks Andy!
carles
Well-known member
I brought my SCA 3202 M2 to the Metz service in Barcelona and after TWO weeks they upgraded the firmware to M3 for the price of 15 € which was a surprise since I thought that it would be free.
I haven't test it throughly but I don't think it works much better than the SCA 301 that I was using in A mode (flash) while the sca3202 was in the shop.
You are also correct about the cable.
Carles
http://www.pbase.com/cspbcn
I haven't test it throughly but I don't think it works much better than the SCA 301 that I was using in A mode (flash) while the sca3202 was in the shop.
You are also correct about the cable.
Carles
http://www.pbase.com/cspbcn
Gerry Siegel
Senior Member
Bogen imaging, the US distributor wrote me that it was available in the US a short while ago. I can not find it anywhere however, so am awaiting a followup reply from Bogen's technical dept.
Address to this gent:---- [email protected] He is the technical honcho of the US distributor for Metz. But I think Metz is behindhand in getting its adapters out there, for some reason. I mean Photokina was months ago...Bogen site does not mention the M3 version, why buy a pig in a poke...I will invest in a system that is updated in relative real time. But one can use Metz in auto mode too, and that is allegedly not so half bad....
Address to this gent:---- [email protected] He is the technical honcho of the US distributor for Metz. But I think Metz is behindhand in getting its adapters out there, for some reason. I mean Photokina was months ago...Bogen site does not mention the M3 version, why buy a pig in a poke...I will invest in a system that is updated in relative real time. But one can use Metz in auto mode too, and that is allegedly not so half bad....
E
emann
Guest
Sam12 I have an extra 3202 m3 that works with Metz 54mz-3 and E1 let me no via email if interested. thxs emann
E
emann
Guest
forgot to mention it does work with TTL
I am interested in the 3202 M3 adaptor you have. Contact me at [email protected]. Thanks. Steve
That is [email protected].
That is [email protected]. Thank you.
Keyboard shortcuts
- f
- Forum