Used Sony DT35MM difficulty focusing

james9120 said:

Purchased a used lens and while the lens is in great condition, I started testing it today and noticed the auto focus is a bit off. I was shooting at F1.8, ISO 100 and letting the camera do the rest and most of my pictures came out blurry. I'm sure it's most likely user error. The only thing that slightly worries me is when I was removing the hood, I accidentally twisted the lens zoom adjustment while the camera was on and focused. Oops.

Click to expand...

lehill said:

james9120 said:

Purchased a used lens and while the lens is in great condition, I started testing it today and noticed the auto focus is a bit off. I was shooting at F1.8, ISO 100 and letting the camera do the rest and most of my pictures came out blurry. I'm sure it's most likely user error. The only thing that slightly worries me is when I was removing the hood, I accidentally twisted the lens zoom adjustment while the camera was on and focused. Oops.

Click to expand...

I downloaded the RAW file, if I'm reading EXIFGUI correctly you were in Wide Area AF mode and letting the camera pick any ol' focus point it wants to.

Switch to any single AF point you want and use it to tell the camera what you want to be in focus. You'll have a lot more success.

Click to expand...

james9120 said:

lehill said:

james9120 said:

Purchased a used lens and while the lens is in great condition, I started testing it today and noticed the auto focus is a bit off. I was shooting at F1.8, ISO 100 and letting the camera do the rest and most of my pictures came out blurry. I'm sure it's most likely user error. The only thing that slightly worries me is when I was removing the hood, I accidentally twisted the lens zoom adjustment while the camera was on and focused. Oops.

Click to expand...

I downloaded the RAW file, if I'm reading EXIFGUI correctly you were in Wide Area AF mode and letting the camera pick any ol' focus point it wants to.

Switch to any single AF point you want and use it to tell the camera what you want to be in focus. You'll have a lot more success.

Click to expand...

Click to expand...

lehill said:

james9120 said:

lehill said:

james9120 said:

Purchased a used lens and while the lens is in great condition, I started testing it today and noticed the auto focus is a bit off. I was shooting at F1.8, ISO 100 and letting the camera do the rest and most of my pictures came out blurry. I'm sure it's most likely user error. The only thing that slightly worries me is when I was removing the hood, I accidentally twisted the lens zoom adjustment while the camera was on and focused. Oops.

Click to expand...

I downloaded the RAW file, if I'm reading EXIFGUI correctly you were in Wide Area AF mode and letting the camera pick any ol' focus point it wants to.

Switch to any single AF point you want and use it to tell the camera what you want to be in focus. You'll have a lot more success.

Click to expand...

Click to expand...

Click to expand...

james9120 said:

Thank you, I can't multi quote or I'd quote both messages here. Would you suggest using local (multi) or spot for an area? I think spot is just focused directly in the center so not sure if that would work out.

Click to expand...

james9120 said:

And wouldn't using spot mess up my exposure setting by just adjusting for what's in the center? Please correct me if I'm wrong, learning everyday!

Click to expand...

james9120 said:

Is it efficient to use the spot focus and then pan the camera to the angle I want, while holding down the shutter button half way?

Click to expand...

james9120 said:

Example would be to center my car, hold the AF button so it focuses, then pan the camera slightly (on a tripod) to suit the angle I want?

Click to expand...

tbcass said:

james9120 said:

Thank you, I can't multi quote or I'd quote both messages here. Would you suggest using local (multi) or spot for an area? I think spot is just focused directly in the center so not sure if that would work out.

Click to expand...

Use spot. The spot can be moved about if you desire or you can use single focus, half press to lock focus and recompose. The choice is yours. What camera are you using?

tbcass said:

And wouldn't using spot mess up my exposure setting by just adjusting for what's in the center? Please correct me if I'm wrong, learning everyday!

Click to expand...

No, exposure is not determined by the spot focusing point. It's determined by the image sensor.

Click to expand...

Jeadm said:

Focusing mode and metering mode are independent of each other.

I recommend Gary Friedman's fine collection of e-books to learn and get the most out of your Sony gear, they're specifically tailored to Sony cameras and your model in particular.

Click to expand...

TillmanB said:

I bought an A37 a while back and when using the kit 18-55mm zoom the focusing seemed ok. I like primes so I bought a Minolta 28mm f2.8 and was disappointed that my memories of that lens from a previous copy I owned didn't match this one, everything came out soft unless stopped down quite a bit. So I sold that and bought the 35mm DT lens since I knew that one was pretty sharp. After taking a bunch of shots of my kids I was still coming up with shots where their faces were soft. I determined it was probably because they moved at the last second and I was using too slow of a shutter speed. I took some more shots being certain to set the camera to faster speeds and spot focus. Still had issues when shoot at wide apertures. I began to notice that focus was sharp, just not where I was focusing. I found a guide online to adjust the calibration of the focus sensors on my camera, and VIOLA! Suddenly things were sharp where I wanted them sharp.

The takeaway here is that I had not noticed a problem with the camera using the kit lens since the slower f3.5 max aperture had enough DOF to hide the issue, but once I used lenses that had shallower DOFs the problem presented itself much more and I initially assumed it was the lens. Now I feel kind of dumb for selling off that 28mm...

Click to expand...

james9120 said:

TillmanB said:

I bought an A37 a while back and when using the kit 18-55mm zoom the focusing seemed ok. I like primes so I bought a Minolta 28mm f2.8 and was disappointed that my memories of that lens from a previous copy I owned didn't match this one, everything came out soft unless stopped down quite a bit. So I sold that and bought the 35mm DT lens since I knew that one was pretty sharp. After taking a bunch of shots of my kids I was still coming up with shots where their faces were soft. I determined it was probably because they moved at the last second and I was using too slow of a shutter speed. I took some more shots being certain to set the camera to faster speeds and spot focus. Still had issues when shoot at wide apertures. I began to notice that focus was sharp, just not where I was focusing. I found a guide online to adjust the calibration of the focus sensors on my camera, and VIOLA! Suddenly things were sharp where I wanted them sharp.

The takeaway here is that I had not noticed a problem with the camera using the kit lens since the slower f3.5 max aperture had enough DOF to hide the issue, but once I used lenses that had shallower DOFs the problem presented itself much more and I initially assumed it was the lens. Now I feel kind of dumb for selling off that 28mm...

Click to expand...

That's the exact issue I'm having. Take this example of my dog i snapped a picture of today.

https://drive.google.com/open?id=0B3yBUOtnRj3TRVQ0cXBjVDdFaWs

The AF was cleared centered with my dogs head, but his head came out soft and shoulders came out sharp. This is with spot auto focus. Do you know the guide that you used? I would like to give it a try.

There's a chance it it might just be me. I took these a few minutes ago.

https://drive.google.com/open?id=0B3yBUOtnRj3TcVRhY0puWGYxUU0

https://drive.google.com/open?id=0B3yBUOtnRj3TVDRwVjZVc1BDcEU

Click to expand...