Vibration Impact on D810

Bluefin

New member
Messages
9
Reaction score
1
Location
CA, US
I need some advice: I have a Harley Road King and my buddy and I are going to ride from Maine to Reno next summer. I would like to bring my D810 and Tamron 24-70 w/image stabilization. My concern is the excessive vibration from the bike and it's impact on the equipment.

I have no clue as to the mechanical design of the mirror, aperture blades and other moving parts of the lens and camera.

The equipment will be in the top of a tall bag strapped to the passenger backrest so it will have about 24 inches of soft clothing to rest on.

Should I be concerned? Should I look at a mirrorless solution?

I'm sure some of you seriously bounce your equipment around on jeep trails, African safaris, boats, etc.

Any advice would be appreciated....Thanks......Mark
 
If the vibration is that bad I'd definitely be worried about my body. My camera would be fine.
 
I need some advice: I have a Harley Road King and my buddy and I are going to ride from Maine to Reno next summer. I would like to bring my D810 and Tamron 24-70 w/image stabilization. My concern is the excessive vibration from the bike and it's impact on the equipment.

I have no clue as to the mechanical design of the mirror, aperture blades and other moving parts of the lens and camera.

The equipment will be in the top of a tall bag strapped to the passenger backrest so it will have about 24 inches of soft clothing to rest on.

Should I be concerned? Should I look at a mirrorless solution?

I'm sure some of you seriously bounce your equipment around on jeep trails, African safaris, boats, etc.

Any advice would be appreciated....Thanks......Mark
I've taken my D810 in all about 3000 miles on a Triumph triple. No problems, even when I got in a rather mad race when I should have known better. If your Harley is causing so much vibes that it will cause problems, can I suggest that you change it for a proper another bike? Seriously, I don't think you have a problem. I put my kit in a tank bag which I've lined with some high density foam, cut to hold the pieces of kit snug. I usually carry the body, a 200-500/5.6E, a 14-24/2.8G and a couple of small lenses. I have enough room left in the bag for a week's clothes and ablution materials (well, a week's worth for a biker). I'm not sure your 'top of a tall bag' is the best placement. For a start, it'll increase the acceleration that the camera kit is subject to. For a second, that heavy kit up the top will raise the CoG higher than you'd want. I'd tend to put it down low, with the clothes on top.

--
Bob.
DARK IN HERE, ISN'T IT?
 
Last edited:
I don't think you'll need to worry... With that said I've picked up Storm case for my rides which makes me feel much more comfortable, especially when on crazy roads :)



gear.jpg




jarekn2_650.jpg




JarekN1_650.jpg








--
JarekN
 
I think you're correct in being concerned.

I would at least try to isolate the camera from vibration by packing it carefully with a soft foam such as egg crate.
 

Keyboard shortcuts

Back
Top