TZ100/ZS100 is really slippery, what is your solution?

JMPeterson · Apr 15, 2016

RemyW said:
The problem with this solution might be that it makes the camera bulkier where the grip is attached, certainly if you have a tightfitting hardcover case where everything fits perfect with one extra spare battery...

While I agree with that concern, it looks like the grips don't extend beyond the lens, so I'm not sure they would make a difference in that scenario (unless the case is formfitting around the lens).

I love the camera, by the way -- took it on our family vacation to Florida last week and it performed beyond my expectations. Aside from the reach, I'm very pleased with the focus speed and accuracy (especially as compared to my Canon G7X).

GeraldW · Apr 15, 2016

Use the other half of the Velcro. Nicer feel to the touch and won't stick to your case lining. I have used it on several cameras, and it provides a nice grip.

GeraldW · Apr 15, 2016

I started with an S90, got the Franiec grip and the Lensmate rear wheel protector ring ($5) and added a patch of Velcro pile (the softer half) to the rear thumb area. Later, I bought a used S95 and moved the grip, ring, and Velcro to it. I still have it. I also use the Flip-bac grips on a couple of my cameras.

For what it's worth, the Lensmate rings work on a number of other Canon and Panasonic cameras and do a great job keeping the base of my thumb off the rear wheel and/or four way button cluster. So far, I have used the rings on the Canon S90/95, SX230HS, SX260HS, ELPH 330HS, SX50HS, SD950IS, and several other SD series.; and on the Panasonic FZ28, FZ150, FZ200, FZ1000, ZS7, and ZS15.

GeraldW · Apr 15, 2016

I've often wondered if the people that design these things actually use them. And it's not just cameras, either.

On the other hand, I'm a tinkerer and so I have added grips and such to many of my cameras. One of my favorites being an S95 with a Franiec grip. It transformed the camera.

I guess I'm sort of your opposite. I won't pass on a desirable camera if it needs a grip and it's something I can fix myself. In fact, I rather enjoy the exercise and the improvement it makes. It makes it more "my camera".

Back in the film days in the 60's, 70's, and 80's, most SLRs lacked a front or rear grip. So it made it difficult and tiring to use a long and heavy lens. I really didn't want the added weight and cost of a motor drive or winder, so I made my own grip for my Nikon FE2 and used it for many years.

I suppose I should add I'm a retired engineer. So the tinkering goes with the territory.

photo perzon · Apr 17, 2016

It is true that the black ZS100 is too slippery. I went to Best Buy yesterday to check it out. I did not see the ZS100, but I did see old cameras I know...the Sony RX100s, the LX100.

The Sony salesperson said he could not use the RX100 at all cause it is too slippery and does not have a grip. I remember before I bought the Franiec grip for it that it was not a confident hold. The Franiec changed the camera. Even though it was still slippery, and that the metal Franiec grip is also pretty smooth, it provided a finger step that gave it a firm feeling of confidence.

The built in grip of the ZS100 is not tall enough. I thought the silver ZS100 which is reported to have texture would be the way, but now I favor the G3 grip(s) shown in this discussion. This is because the front grip and the thumb rest are the critical holding surfaces. I plan to cut a G3 for the back, but I am open to suggestions.

RDCollins · Apr 18, 2016

photo perzon said:
...I plan to cut a G3 for the back, but I am open to suggestions.

Try the little vinyl bumper thingy I mentioned in a post in this thread a few days ago. It fits nicely, works well, and doesn't cost $10. Also, looking at the camera I don't believe the area available for a "thumb grip" is large enough to accommodate anything but a very tiny chunk of a Flipbac G3. Worth a shot IMHO.

PC Wheeler · Apr 18, 2016

RDCollins said:
I put a Flipbac G3 Camera Grip on the front ($10 at B&H) and small (about 8mm) vinyl door bumper (the kind used for cupboard doors) on the back. Works great, very secure one-handed shooting, and to my way of thinking looks much better than some of the other solutions I'd seen.

I use this sort of thing for feet on small electronic projects. Here's a link to one type:

Loading…

www.amazon.com

--
Phil

photo perzon · Apr 18, 2016

RDCollins said:
photo perzon said:

...I plan to cut a G3 for the back, but I am open to suggestions.

Click to expand...

Try the little vinyl bumper thingy I mentioned in a post in this thread a few days ago. It fits nicely, works well, and doesn't cost $10. Also, looking at the camera I don't believe the area available for a "thumb grip" is large enough to accommodate anything but a very tiny chunk of a Flipbac G3. Worth a shot IMHO.

speedyK · Apr 18, 2016

photo perzon said:
It is true that the black ZS100 is too slippery. I went to Best Buy yesterday to check it out. I did not see the ZS100, but I did see old cameras I know...the Sony RX100s, the LX100.

The Sony salesperson said he could not use the RX100 at all cause it is too slippery and does not have a grip. I remember before I bought the Franiec grip for it that it was not a confident hold. The Franiec changed the camera. Even though it was still slippery, and that the metal Franiec grip is also pretty smooth, it provided a finger step that gave it a firm feeling of confidence.

The built in grip of the ZS100 is not tall enough. I thought the silver ZS100 which is reported to have texture would be the way, but now I favor the G3 grip(s) shown in this discussion. This is because the front grip and the thumb rest are the critical holding surfaces. I plan to cut a G3 for the back, but I am open to suggestions.

For a pocketable camera, the less bulk the better IMO (though on my A7R2 and GX-7, the pronounced grips are great).

As posted above (with pics), I added 3m Safety Walk tape to both my RX100 (and RX100M2 and RX100M3) and have added it to my TZ101(ZS100). The rough texture eliminates any slippiness and provides absolute security on front and rear without bulk.

caver101 · Apr 19, 2016

aodi said:
I use this

http://www.amazon.com/Flipbac-FBG3-...460549523&sr=8-1&keywords=flipbac+camera+grip

TaBMeRc · Jun 7, 2016

I have used the grip stickers from a sony RX100 III. Not a perfect fit but look decent functions well and is easy to find sellers.

Chris9999 · Jun 13, 2016

TaBMeRc said:
I have used the grip stickers from a sony RX100 III. Not a perfect fit but look decent functions well and is easy to find sellers.

This looks good. Can you provide a link where to purchase these?

TaBMeRc · Jun 30, 2016

This is the on I got on amazon,

Fotga Leather Case Protector Decoration Sticker Body Skin for Sony Dsc-rx100iii M3 Black https://www.amazon.co.uk/dp/B013HTL3PQ/ref=cm_sw_r_other_apa_oArDxbXFWJM3N

But I'm sure there are other sources. Very happy with it so far, very secure and makes a massive difference to usability.

platyase · Jun 30, 2016

I used this rubbery grip tape, trimmed to fit, on my ZS100.

This small pack is more than enough for the camera:

Loading…

www.amazon.com

There's also a large pack if you want to use it for other stuff as well:

Loading…

www.amazon.com

NoTrumpAce · Feb 19, 2017

Phil: Thanks for posting this tip. I followed your advice along with G3 grip on the front of the camera. The combination works as well as you suggested. NoTrumpAce

mkygod · Sep 10, 2017

I use the Flipbac grip and added some of the rubber grip tape.

I put the grip in kindve an odd position right on the identation of the camera but seems to work well with the way i hold the camera. In the standard position, it felt a bit weird to me. I found that the grip tape is super useful on top of the flash as it makes it super easy to angle the flash upwards w/o any slippage.

Trafford2 · Sep 10, 2017

mkygod said:
I use the Flipbac grip and added some of the rubber grip tape.

I put the grip in kindve an odd position right on the identation of the camera but seems to work well with the way i hold the camera. In the standard position, it felt a bit weird to me. I found that the grip tape is super useful on top of the flash as it makes it super easy to angle the flash upwards w/o any slippage.

Too much grip tape, over the flash door looks like a bad move.

KonradDC · Sep 10, 2017

Trafford2 said:
mkygod said:

I use the Flipbac grip and added some of the rubber grip tape.

I put the grip in kindve an odd position right on the identation of the camera but seems to work well with the way i hold the camera. In the standard position, it felt a bit weird to me. I found that the grip tape is super useful on top of the flash as it makes it super easy to angle the flash upwards w/o any slippage.

Click to expand...

Too much grip tape, over the flash door looks like a bad move.

I agree with you Trafford2. I would have place the materials differently, in less areas. I would have tape next to the Fn1 button and the area next to the lens. I would stick the rubber grip just below the line, inline on the hump. I did my own little conversion, with stuff I had around the house - half of some velcro materials.

https://www.dpreview.com/forums/post/59899509
Basically I covered the same areas as my TZ70/ZS50 front and back.

gus607 · Sep 10, 2017

Some of these stick on ideas look horrendous, why not just use the supplied wrist strap ?

saudidave · Sep 10, 2017

gus607 said:
Some of these stick on ideas look horrendous, why not just use the supplied wrist strap ?

The wrist strap, stops you dropping it but it doesn't improve the ergonomics of handling the camera. I personally don't find holding it that difficult but I struggle to understand why the designers at Panny put better grips on the other TZ releases at the same time but not on this higher end model. Perhaps it was a marketing ploy? They could release the 1" sensor model knowing the innovation would sell, but knowing the better grip would be a wanted feature in the mkII

I've just ordered a Flipbac G3 for mine but sadly I there isn't much I can do about the inadequate EVF. The only thing I can do with that is use a clearviewer.

Dave

TZ100/ZS100 is really slippery, what is your solution?

Member

Veteran Member

Veteran Member

Veteran Member

Senior Member

Senior Member

Forum Pro

Senior Member

Well-known member

Well-known member

New member

New member

New member

platyase

Guest

New member

New member

Attachments

Senior Member

Well-known member

Active member

Senior Member

Similar threads

Keyboard shortcuts