Tripod for 7Hi?

vivaldibow

Senior Member
Messages
1,064
Reaction score
323
I searched this forum but didn't find too much useful
information. Any suggestion? Thanks.
 
I searched this forum but didn't find too much useful
information. Any suggestion? Thanks.
It's not like the Dimage 7 requires a proprietary tripod. Unless they've changed them since I bought mine they still have a 1/4 socket like 99.9% of all the cameras in the world.

You might have better luck asking for what kind of tripod to get for a specific purpose. I like my Bogen 3221 and 3047 head but it may be too much to take backpacking if that's what you want. Likewise my 3007 tabletop model sees much use but isn't suited to the studio.
 
Bingo. Tripods are definitely not a "one size fits all" accessory! One has to consider the purpose(s) for which the tripod will be used.

My needs are well served by the Velbon Ultra MAXi. I wanted a tripod that I could easily carry in my luggage, or even in a backpack, without adding a lot of bulk and weight. Velbon's MAXi line is a series of ultra-portable tripods--typical weight is around 2 lbs/1 kg, and typical folded size is 14-16 in/35-40 cm. Despite their light weight, they are fairly sturdy ( exceptionally sturdy considering their lack of bulk!) I think they're reasonably priced too, at $90-$110 in the US.

While I'd recommend a MAXi to anyone looking for an extremely portable tripod, they're certainly not for everyone. Again, the purpose that the tripod will be expected to fulfill is the most important thing to consider.

Cheers,
Jeremy

--
Jeremy L. Rosenberger
http://www.frii.com/~jeremy/
 
It is a great little device.
  • Claims to be the world's most compact full-height tripod. Folds to just over 13" and reaches a full height of about 6ft.
  • Another unique feature is that it folds flat, like a book - makes it very easy to put it in my backpack.
  • One of the legs can be detached to form a monopod - so if you don't feel like or need to be carrying the whole thing, then just grab that leg and you are set
  • Very cool & inventive locking mechanism, just twist one way to lock and the other way to release = quicker setup times
  • The center pole can be reversed so that you can shoot as low as 13cm from the ground - great for macros and unusual angle shots
  • Weighs in about 1Kg
All in all, I think it is excellent value for money. Here is the link at B&H
http://www.bhphotovideo.com/product/14703/CUM2/REG/2635
I searched this forum but didn't find too much useful
information. Any suggestion? Thanks.
 
Thanks for your post. I know the tripod should
be kind of universal. But...

Those are from Phil's review about the tripod.

"unfortunately it's located too quite close to the front of the camera which, on some tripod mounts, would lead to the camera tilting forwards slightly."

My purpose is for outdoor shooting. A sturdy but light-weighted
(is there one?) tripod is preferred. The price range is from
tens of dollars to hundreds of dollars? What are the differences?
 
I have been using a Velbon DF-50 it extends to 59" and folds to 22", weight is 3 pounds. About $50 US. It also has a quick release platform. I am very satisfied with it.
 
I searched this forum but didn't find too much useful
information. Any suggestion? Thanks.
You would think choosing a tripod would be a simple matter. Really. It's just a support for your camera, right?

Ha.

I spent month's trying to figure out which tripod to buy. Like someone eles mentioned, you really need to define your requirements. Here were mine:

1. As light as possible because if it's heavy, it will never leave home. Want it light enough for hiking.

2. Want stability. Not some flimsy thing that's going to move or vibrate when my film SLR camera's mirror flips.

3. Weight capacity: Want to have the capability to handle cameras that I will purchase in the future. That would likely be a 10D type camera with who knows what kind of lens.

4. Budget. Don't want to break the bank on this.

Requirements 1 and 2 dictated a model with carbon legs. Requirement 4 worked against a carbon model.

After extensive research, I purchased Hakuba HG=6230C carbon fiber legs paired with a Velbon PH-263QL ball head. This combination might be overkill for my 7i, but as I mentioned, I have a film SLR and plan to someday upgrade to a DSLR. I don't want to have to buy another tripod.

If you're thinking of spending very little money for a tripod, please at least give consideration to the following article on tripod selection:

http://www.bythom.com/support.htm

Best of luck.

--
Blake
 
Bingo. Tripods are definitely not a "one size fits all" accessory!
One has to consider the purpose(s) for which the tripod will be
used.

My needs are well served by the Velbon Ultra MAXi. I wanted a
tripod that I could easily carry in my luggage, or even in a
backpack, without adding a lot of bulk and weight. Velbon's MAXi
line is a series of ultra-portable tripods--typical weight is
around 2 lbs/1 kg, and typical folded size is 14-16 in/35-40 cm.
Despite their light weight, they are fairly sturdy ( exceptionally
sturdy considering their lack of bulk!) I think they're reasonably
priced too, at $90-$110 in the US.

While I'd recommend a MAXi to anyone looking for an extremely
portable tripod, they're certainly not for everyone. Again, the
purpose that the tripod will be expected to fulfill is the most
important thing to consider.

Cheers,
Jeremy
hello ,
i goot one , the velbon ultramaxi ph-237q, 2 months ago
very good quality, all metal and sturdy, works great

patrick..
 
I really appreciate all you guys' information. I'll do some
homework first and come back...this place makes me feel
like home. so many nice people.
I searched this forum but didn't find too much useful
information. Any suggestion? Thanks.
You would think choosing a tripod would be a simple matter.
Really. It's just a support for your camera, right?

Ha.

I spent month's trying to figure out which tripod to buy. Like
someone eles mentioned, you really need to define your
requirements. Here were mine:

1. As light as possible because if it's heavy, it will never leave
home. Want it light enough for hiking.

2. Want stability. Not some flimsy thing that's going to move or
vibrate when my film SLR camera's mirror flips.

3. Weight capacity: Want to have the capability to handle cameras
that I will purchase in the future. That would likely be a 10D
type camera with who knows what kind of lens.

4. Budget. Don't want to break the bank on this.

Requirements 1 and 2 dictated a model with carbon legs.
Requirement 4 worked against a carbon model.

After extensive research, I purchased Hakuba HG=6230C carbon fiber
legs paired with a Velbon PH-263QL ball head. This combination
might be overkill for my 7i, but as I mentioned, I have a film SLR
and plan to someday upgrade to a DSLR. I don't want to have to buy
another tripod.

If you're thinking of spending very little money for a tripod,
please at least give consideration to the following article on
tripod selection:

http://www.bythom.com/support.htm

Best of luck.

--
Blake
 
...but I just got a cheap Sunpak 6601UT tripod. Works for me. Has 2 mounting plates included, very tall (58") when fully open (has geared crank) so I can stand and the 7Hi is right before my eyes, has a second thread on the bottom for macro stuff, decent weight for its height (2.5 lb - 1.13 kg), bubble level on tripod and another one on each mounting plate, quick release, 3-way fluid panhead, case included. All - for US$28 at B&H ( http://www.bhphotovideo.com/bh5.sph/FrameWork.class?FNC=ProductActivator__Aproductlist_html___278313___SU6601UTJ___REG___CatID=0___SID=F5F6F048260___call=specs#goto_specifications )

Well, it works. I'm sure it can't compare with expensive tripods, but what I need from a tripod is that it would hold my camera without moving or falling, can be adjusted in all directions, set low enough and high enough so I won't have to crawl, and not to be too heavy to take for a walk. I honestly don't expect it to damp vibratioins when I kick it with my boot. It does it for me, so I don't see any reason to buy an expensive one. Will it improve my photographs? I don't think so...

I wish I could find a thin UV filter in Toronto :-( Even in US it's usually on backorder...
I searched this forum but didn't find too much useful
information. Any suggestion? Thanks.
--
Web: http://www.romandesign.ca
My Music: music.romandesign.ca
 
That's a very innovative design! If I didn't already have a Velbon Ultra MAXi I'd be taking a serious look at this one!

Cheers,
Jeremy

--
Jeremy L. Rosenberger
http://www.frii.com/~jeremy/
 
That's a very innovative design! If I didn't already have a Velbon
Ultra MAXi I'd be taking a serious look at this one!

Cheers,
Jeremy
Please excuse my jumping in here but, How do you like the Ultra Maxi ?

I was looking at it online, but wasn't sure about the 50 in max hieght, or weather or not the 5 legs would be sturdy enough ?
--
Regards....Matt K
' It takes me an hour and 1/2 to watch 60 minutes '
 
Hi Roman

I promise I am not going to kick you. As long as you are getting photos you are happy with, who cares what equipment you use ??

I just wanted to give you ( and Xyuan ) a friendly piece of advice. Whenever possible try NOT to elevate the centerpost. The stablity of the tripod is predicated on the assumption that the tripod head is sitting right on top of the tripod legs. If you elevate the center column, you are in effect, putting a monopod on top of a tripod. Granted it will be more stable than simply handholding the camera, but it won't be as stable as having the tripod head resting directly on top of the tripod legs.

Roy

P.S.: Roman, how do like your 7HI ??
( http://www.bhphotovideo.com/bh5.sph/FrameWork.class?FNC=ProductActivator__Aproductlist_html___278313___SU6601UTJ___REG___CatID=0___SID=F5F6F048260___call=specs#goto_specifications )

Well, it works. I'm sure it can't compare with expensive tripods,
but what I need from a tripod is that it would hold my camera
without moving or falling, can be adjusted in all directions, set
low enough and high enough so I won't have to crawl, and not to be
too heavy to take for a walk. I honestly don't expect it to damp
vibratioins when I kick it with my boot. It does it for me, so I
don't see any reason to buy an expensive one. Will it improve my
photographs? I don't think so...

I wish I could find a thin UV filter in Toronto :-( Even in US it's
usually on backorder...
I searched this forum but didn't find too much useful
information. Any suggestion? Thanks.
--
Web: http://www.romandesign.ca
My Music: music.romandesign.ca
 
I searched this forum but didn't find too much useful
information. Any suggestion? Thanks.
I have the Velben Maxi 343i and its a great tripod for hiking and traveling--2 pounds, short when folded with quick action leg levers. I have Bogen for studio environment.

If you photograph things on the ground, you will need a good table top tripod. I have one for 6 inches from ground, non telescopic and one for 12 inches.

I take a tripod everywhere I go. I hate losing telephoto shots and slower shots because of blur. So the tripod gets a lot of action--up-down, tall-short--the higher priced unit will tend to be cheaper in long run because the hardware will tend to not wear out as quickly as cheap. The higher priced tend to be more solid. Notice I use the word "tend". Some are high priced just for the name.

Make sure the remote cable shutter release is in your arsenal of tools.

John Elliott
 
Thanks, John.
If you photograph things on the ground, you will need a good table
top tripod. I have one for 6 inches from ground, non telescopic
and one for 12 inches.
I did take a picture of a flower on the ground without a table
tripod this afternoon. It is really painful. Can a regular folded tripod
be short enough for such shooting, rather than an extra table tripod?

Thank you...
 

Keyboard shortcuts

Back
Top