Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Den -- have you tried using the Epson Printer Utility to check and clean the print nozzles? If they are clogged you can get these symptoms. Do a check of the nozzles to see if eveything is working OK. Just about every color balance problem I have had with my 785 has been fixed this way.Hi All- I am using an Epson 785EPX, Olympus C2100 Camera, Epson
Premium Glossy paper, making the printer settings for all the
above. Why oh why do my prints come out with a reddish tone??? On
the monitor (yes I have calibrated it), everything looks fine, on
paper it looks like a red filter was used. TIA
Hi All- I am using an Epson 785EPX, Olympus C2100 Camera, Epson
Premium Glossy paper, making the printer settings for all the
above. Why oh why do my prints come out with a reddish tone??? On
the monitor (yes I have calibrated it), everything looks fine, on
paper it looks like a red filter was used. TIA
--Hi All- I am using an Epson 785EPX, Olympus C2100 Camera, Epson
Premium Glossy paper, making the printer settings for all the
above. Why oh why do my prints come out with a reddish tone??? On
the monitor (yes I have calibrated it), everything looks fine, on
paper it looks like a red filter was used. TIA
Den -- have you tried using the Epson Printer Utility to check andHi All- I am using an Epson 785EPX, Olympus C2100 Camera, Epson
Premium Glossy paper, making the printer settings for all the
above. Why oh why do my prints come out with a reddish tone??? On
the monitor (yes I have calibrated it), everything looks fine, on
paper it looks like a red filter was used. TIA
clean the print nozzles? If they are clogged you can get these
symptoms. Do a check of the nozzles to see if eveything is working
OK. Just about every color balance problem I have had with my 785
has been fixed this way.
Good luck!
--
Steve
Canon G2, Mac OS X Jaguar, Epson 785EPX
sometimes the red hue indicates double profiling. did you try prinnt out a photo with film factory or in computerless mode? did you do a nozzle check and it showed all the nozzles were ok? you usually do not have to clean the nozzles 5 times. Whenever I find that my nozzle check is not good, the first thing I do is to remove the offending ink tank (if the black nozzle check is not good I remove the black cart, if one of the colors shows not good I just remove the color) and reinstall the ink tank. These tanks are chipped, they remember ink levels. It will do a prime after you reinstall it, and after it is finished you can print out another nozzle test to check it. I have found this method will clear up a problem much faster than doing multiple cleanings. Sometimes it may requiire 1 more cleaning, which I just do thru the print utilities (same place as the nozzle check)Hi All- I am using an Epson 785EPX, Olympus C2100 Camera, Epson
Premium Glossy paper, making the printer settings for all the
above. Why oh why do my prints come out with a reddish tone??? On
the monitor (yes I have calibrated it), everything looks fine, on
paper it looks like a red filter was used. TIA
sometimes the red hue indicates double profiling. did you tryHi All- I am using an Epson 785EPX, Olympus C2100 Camera, Epson
Premium Glossy paper, making the printer settings for all the
above. Why oh why do my prints come out with a reddish tone??? On
the monitor (yes I have calibrated it), everything looks fine, on
paper it looks like a red filter was used. TIA
prinnt out a photo with film factory or in computerless mode? did
you do a nozzle check and it showed all the nozzles were ok? you
usually do not have to clean the nozzles 5 times. Whenever I find
that my nozzle check is not good, the first thing I do is to remove
the offending ink tank (if the black nozzle check is not good I
remove the black cart, if one of the colors shows not good I just
remove the color) and reinstall the ink tank. These tanks are
chipped, they remember ink levels. It will do a prime after you
reinstall it, and after it is finished you can print out another
nozzle test to check it. I have found this method will clear up a
problem much faster than doing multiple cleanings. Sometimes it may
requiire 1 more cleaning, which I just do thru the print utilities
(same place as the nozzle check)
