Sony DSC-F505V Specifications

Street Price
Max resolution
1856 x 1392 (native)
2240 x 1680 (interpolated)
Low resolution
1856 x 1232 (native 3:2)
1600 x 1200
1280 x 960
640 x 480
Image ratio w:h
4:3 (3:2 @ 1856 x 1232)
CCD pixelsClick for help
3.34 megapixels (2.62 effective)
CCD sizeClick for help**
1/1.8" (0.556")
A/D Converter
12 bit
ISO ratingClick for help
Auto (variable 100 - 300)
Carl Zeiss, F2.8 - F3.3
Zoom wide (W)Click for help
38 mm
Zoom tele (T)Click for help
190 mm (5 x)
Digital zoomClick for help
Yes, smooth up to 2 x
Auto Focus
Contrast detection
Manual FocusClick for help
Yes, focus ring free focusing.
Normal focus range
25 cm (9.8") - Infinity
Macro focus range
2 cm (0.8") - 25 cm (9.8")
White balance override
Yes - 2 position & Hold (button on case)
Min shutterClick for help
8 sec (Night+)
Max shutterClick for help
1/1000 sec
Built-in Flash
Yes, pop-up
Flash Guide No.
2.5m (8.2ft)
External Flash Yes, Sony sync connector (for HVL-F1000)
Flash modes
Auto, Anti-red-eye, Fill-in, Off
Exposure adjustmentClick for help
-2EV to +2EV in 1/3EV steps
MeteringClick for help
Center-weighted, Spot
Aperture priorityClick for help
Yes, full range (7 positions: F2.8 - F8.0)
Shutter priorityClick for help
Yes, full range (19 positions: 8s - 1/1000s)
Full manualClick for help
Lens thread
Yes, 52 mm
Continuous / Burst
Movie: MPEG 320 x 240 / 160 x 120
Tripod mount
Yes, 10s delay
Remote control
Time-lapse recording
Video out
Yes, switchable NTSC / PAL
Storage types
Storage included
8 MB MemoryStick
Uncompressed format
Compressed format
Quality Levels
TIFF, JPEG Fine, GIF (B&W Text)
2.0" TFT Sunlight Hybrid
Playback zoom
Yes, 1.1x to 5.0x CHECK
Operating system
BatteryClick for help
Yes, supplied Sony InfoLithium NP-FS11
Battery chargerClick for help
Yes, supplied CHECK adapter / charger
Weight (inc. batteries)
420 g (14.8 oz)
107 x 62 x 135 mm
(4.2" x 2.4" x 5.3")
Notes Voice recording

Click for help- click for pop-up help


What that means is that if it were a vidicon tube it would be 0.556 inches in diameter.

This measuring system is a leftover from the days of video TUBES and has nothing to do with the surface area of the chip in a direct sense. The Edmund Scientific Optics catalog has a sidebar that completely backs up the idea.

For instance, a "one inch" chip has a 16mm diagonal sensor array. A "one half inch" chip has an array of only 8mm in the diagonal. This means that the 1/1.8 = 0.555 inch measurement means NOTHING about the sensor array size. Unless they have changed the entire measurement system just for this chip, the actual sensor patch is 11% larger than the 8mm of a 1/2 chip or 8.88mm in diagonal.

(Mark Schubin of Videography Magazine)