Ricoh GXR/P10 28-300mm F3.5-5.6 VC Quick Review
Resolution Chart Comparison (JPEG)
Shots here are of our 'version two' resolution chart which provides for measurement of resolution up to 4000 LPH (Lines Per Picture Height). A value of 20 equates to 2000 lines per picture height. The chart is shot at a full range of apertures and the sharpest image selected. Studio light, cameras set to aperture priority (optimum aperture selected), image parameters default. Exposure compensation set to deliver approximately 80% luminance of white area.
What we want to show here is how well the camera is able to resolve the detail in our standard test chart compared to the theoretical maximum resolution of the sensor, which for the charts we shoot is easy to work out - it's simply the number of vertical pixels (the chart shows the number of single lines per picture height, the theoretical limit is 1 line per pixel). Beyond this limit (when talking about line pairs usually referred to as the Nyquist frequency) the sensor cannot faithfully record image detail and aliasing occurs.
This limit is rarely attained, because the majority of sensors are fitted with anti-aliasing filters. Anti-aliasing filters are designed to reduce unpleasant moiré effects, but in doing so, they also reduce resolution (the relative strength and quality of these filters varies from camera to camera). In theory though, a sensor without an AA filter, when coupled with a 'perfect' lens, will deliver resolution equal to its Nyquist limit. Therefore, even though it may be effectively unattainable with normal equipment in normal shooting situations, an understanding of a sensor's theoretical limit provides a useful benchmark for best possible performance. Nyquist is indicated in these crops with a red line.
On this page we're looking at both JPEG and Raw resolution. For a (more) level playing field we convert the latter using Adobe Camera Raw. Because Adobe Camera Raw applies different levels of sharpening to different cameras (this confirmed) we use the following workflow for these conversions:
- Load RAW file into Adobe Camera RAW (Auto mode disabled)
- Set Sharpness to 0 (all other settings default)
- Open file to Photoshop
- Apply a Unsharp mask tuned to the camera, in this case 100%, Radius 0.6, Threshold 0
- Save as a TIFF (for cropping) and as a JPEG quality 11 for download
|JPEG (3648 x 2736) 3.5MB||RAW (3648 x 2736) 3.9MB|
The P10 28-300mm's resolution results are average for a small-sensor compact camera. Detail is lost long before Nyquist but on the plus side the out-of-camera images are very clean with hardly any artifacts and no moire. The RAW file which has been processed using our own workflow (see top of the page for a description) looks a little softer at first sight but upon closer inspection reveals visibly more detail than the JPEG counterpart. There is at least 'some' detail up to and beyond Nyquist.
|AF4_2483 Surfing the Serengeti by DaveInHouston|
from Hot Air Balloon view
|Peregrine Falcon by Psychic1|
from Best Wildlife Photo of the Week - 4