Capture Clip V3
$70 | Peak Design.com
|The original Capture Clip was a darling of Kickstarter, raising nearly $15 million back in 2011. V2 debuted in 2013 and was replaced by V3 at the beginning of 2018.|
First released on Kickstarter in 2011, the Peak Design Capture Clip aimed to give photographers an easier way to carry their camera. Seven years later, we now have the Capture version V3, a much sleeker and more streamlined iteration of the original product.
- Arca-compatible plate
- Aluminum construction
- Anti-slip pad on mounting surface
- Quick release button with security lock
- Clip fits straps up to 6.4 cm wide and 1.6 cm thick
- System can hold up to 90 kg (200 lb)
- Available in silver and black
|$69.95 gets you the Capture Clip, an Arca-compatible plate, x2 hand-drive screws, x2 4mm hex screws (not shown), a hex wrench and a microfiber pouch for storage.|
V3 boasts a 'smaller, lighter and lower profile' than V2 – more specifically it's 57 g / 2 oz lighter (clip plus plate), 2.1 cm narrower, 1.2 cm shorter and 0.8 cm thinner. From a design perspective this means an accessory that looks less like a chunky piece of gear and more like an integrated piece of design affixed to your bag or strap. It's made of all aluminum (minus some rubber bits for gripping your bag strap) and has a smooth anodized finish, compared to the power-coated finish of its predecessor. The Capture Clip is also now available in two colors; Silver and Black.
With V3, Peak Design has simplified the Capture lineup to just one product – V2 offered both the Capture Standard and CapturePro at different price points. The former had a glass-reinforced nylon back and was cheaper than the all-aluminum Pro.
Like the V2, you can still integrate a variety of add-ons to your Capture system such as the Manfrotto RC2 compatible Dual Plate or the Peak Design Lens Kit. This means you can use the Capture Clip for its base purpose but still have the option to expand its functionality well beyond just carrying a camera on your bag.
What's also nice is V3 ships with two different sets of clamping bolts, hand-driven ones and a set that are driven in using a hex key (included).
|The Capture Clip, in action.|
The Capture system is extremely well designed and works exactly how you would expect it to: With the plate attached to your camera, simply slide it into the clip from above. When you want to retrieve your camera, press and hold the small button on the right side while sliding your camera back upward.
The first time I attached the system to my bag, I honestly didn’t expect to love it but quickly found myself enjoying the convenience it provides. In fact, all of the following gripes I have are admittedly nit-picky stuff because frankly the Capture Clip works well.
Even with a heavy camera attached, the Capture feels very secure
Attaching the clip portion to your bag for the first time can be a bit of a hassle but the key is just to loosen it more than you think you need to. Most folks will attach it to a backpack but it can easily be attached to a messenger bag, belt or something else entirely. Once attached to something it's not hard to remove and replace. I tried it on both my Peak Design Everyday Backpack and my nearly decade old Camelbak backpack and it fit securely on both.
Even with a heavy camera attached, the Capture feels very secure. The only time I worried while using it was when pulling my backpack off my shoulders. I sometimes instinctively like to toss my bag around - not a good idea when your precious gear is connected to the front.
While writing this review, I used the Capture with 4 different cameras: a Nikon D750 w/ 50mm 1.8 (1 kg / 2.19 lb), Nikkormat FTN w/ 50mm 1.4 (1.1 kg / 2.43 lb), Bronica RF645 w/ 65mm f/4 (1.1 kg / 2.44 lb) and Hasselblad 501C w/ 80mm f/2.8 (1.47 kg / 3.25 lb). All of these felt confidently secure.
Peak Design says the Capture is rated for up to 90 kg / 200 lb so safety-wise almost anything you would put on there is a non-issue. For me personally, the Hasselblad was a bit too heavy to be comfortable. But it wasn't just the weight; I also didn’t feel comfortable with the way large cameras or those with long lenses tend to pull down, potentially jabbing into your body.
|The Capture system not only makes it simple to carry your camera, but it also means you always have a plate attached for tripod mounting.|
My biggest hangup with the Capture is just getting used to having your camera on your chest (that’s where I wore it at least), but it only took me about an hour of walking around in a park to get used to it. And by later that same day – while on a different shoot – I found I was using it instinctively.
My biggest hangup with the Capture is just getting used to having your camera on your chest
Overall for the price point of $69.95 the Capture Clip V3 isn’t cheap, but it’s worth the money if you’re looking for a new approach to the way you carry your camera. And if you’re looking to add another clip to your arsenal or upgrade from a previous version, you have the option of buying just the Clip alone for the lower price of $49.95.
Peak Design continues to bring a photographers-first approach to their design with a very strong sense for what works and what doesn’t. In this writer's opinion, the new Capture Clip falls squarely in the "works" column.
What we like:
- Very comfortable, lightweight and slim
- Rated for up to 90 kg / 200 lbs, very secure and safe
- Very quick learning curve and extremely easy to get used to
- Feels great ergonomically
- Lots of options for placement and expanding uses with other add-ons
- Stylish, really
What we don’t:
- Gear hangs forward on chest
- Hex screw requires you to keep the hex wrench with you
|Intrepid View-072500 by vbuhay|
|Jazz Hands_ by Imagemi|
from Musical instruments
|Fire Urchin by sgitlin|
from Ricoh Challenge
Montana judge Dana L. Christensen has ruled the Republican National Committee did not infringe upon the copyright of photographer Erika Peterman after they took a photo from a Democratic candidate's Facebook page without permission and altered it to use in a derogatory promotional mailer.
Nikon has launched updates for three of its programs to address various bugs and glitches that could cause crashes and unwanted results.
LEE Filters has launched the LEE100, its next-generation filter holder that improves the design and looks in all the right places.
With the arrival of some much-needed sunshine and final production firmware for the Panasonic S1, we've been able to get outside and really start putting the camera through its paces.
Importing, culling and tagging photos is about to get a whole lot faster and look a whole lot better with the impending arrival of Photo Mechanic 6.
On its own, the FTZ adapter retails for $250 and when bundled it dropped the cost to just $150. Now, Nikon is offering it for free with all Z6, Z7 purchases in the United States.
Profoto said it spoke with Godox back at Photokina 2018 and continues to contact Godox in an effort to stop it from marketing its V1 light.
Product renders in Italian publication Notebook Italia show an unusual design that conceals all cameras with the help of a slider mechanism.
Canon says its new EF 400mm F2.8L IS III and EF 600mm F4L IS III lenses can suffer from an intermittent flickering when shooting video in M or Av modes with certain cameras.
Leica recently announced the Q2, a digital rangefinder with a fixed 28mm F1.7 lens. It's a heck of a lot of fun to shoot with, but is it right for you? Based on our time with the camera, and its specifications, we've examined how well-suited it is for common photography use-cases.
Now that our Panasonic Lumix S1R has final firmware, we couldn't wait to get out shooting with it - and we also tried the high-res mode, which combines files to get 187 megapixel images. Because sometimes, 47 megapixels just isn't enough.
In this article, travel and landscape photographer Mitch Green encourages us to spend more time in the the field.
the lens lacks any electronics whatsoever and is constructed entirely of glass and metal. Of course, that comes at the expense of weight — this thing weighs in at 1.1kg / 2.43lbs.
Drones can be useful tools in urban areas, where they're utilized for everything from news reporting to building inspections, but flying in these areas requires careful preparation. Here's what you need to know to do so safely.
Hasselblad has released a new cable release and USB double battery charger for its X1D medium format camera .
After a report published by NBC News, Flickr has taken heat for allegedly letting IBM 'scrape' photos for use in its facial recognition datasets. But the problem isn't what it seems on the surface.
Samyang has announced the impending arrival of the AF 85mm F1.4 FE lens for full-frame Sony cameras.
Some Photoshop shortcuts are simple and obvious. Others, not so much. Here are 15 shortcuts that are actually useful.
Twitter has redesigned its in-app camera for easier access from the timeline screen.
Independent cinema lens manufacturer SLR Magic has announced it will offer all of its existing MicroPrime range in the Fujifilm X mount and has even created a Fuji-specific 12mm lens.
We've updated our buying guides with three more cameras: the Canon EOS RP, Nikon Z6 and Olympus E-M1X.
CFexpress 2.0 cards will come in three different form factors, each of which will offer different maximum speeds.
Lensbaby has added a third tilt lens to its Optic Swap system, this time a 35mm lens, adding to the existing 50mm and 80mm options.
Sigma has released firmware updates for a number of its lenses as well as its EF-E adapter to address various errors and features with Canon, Nikon and Sony cameras.
We've added the Fujifilm X-T30 and Sony a6400 to our 'Best Cameras under $1000' buying guide. These two mirrorless models pack in a lot of features for just $900 body only.
Instagram, Facebook and other Facebook-owned services are down for users around the world.
Think Tank Photo has unveiled its new Vision series of shoulder bags, including the Vision 10, Vision 13 and Vision 15.
The OPPO Reno series will be launched on April 10 but some details have already been spotted on the web.
Insta360 has unveiled its latest camera, as well as a new VR headset app and a specialized smartphone cover that makes it possible to view 3D video on standard smartphones.
A fresh crop of ready-for-anything compacts has been added to our buying guide – just in time for Spring Break.