Like most recent Nikon DSLRs the D3X has a high resolution VGA screen with a very fine pixel pitch which means you don't see any gaps between pixels. That makes for both very detailed but also surprisingly smooth gradations in flat areas of the image. As a result you tend not to zoom into images quite as far in playback in order to check sharpness / focus accuracy. Manual focusing in live view mode is very easy too.
Press the info button in shooting mode (except live view) to show a full screen 'shooting information' display, we first saw a screen like this implemented in the D40 and there are certainly circumstances where having this level of information on one single screen can be very useful. The D3X's shooting information screen automatically (or optionally manually) switches from light background to dark background in low light situations. Our only gripe with this feature (same as the D3 implementation) was that the information display disappears as soon as you half-press the shutter release button and does not return, you have to press info again, it would have been nice to have a 'persistent shooting information' custom function.
Note that this screen is for viewing information only. You can't (as you can on the D700 for instance) press the info button a second time and then change settings on screen. On the one hand it is slightly surprising that Nikon has not implemented this feature on its new flagship, on the other hand the D3X's abundance of external buttons probably makes up for it.
|Light screen background||Dark screen background (low light)|
The D3X sports the same virtual horizon feature as the D3. It provides an aircraft-cockpit type live virtual horizon on the LCD monitor indicating the current orientation of the camera, perfectly horizontal or vertical and the camera axis line turns green (shown on the right below). Our gripe with this feature is that its implementation makes it more toy-like than really useful, by default it is viewed via an option from the Setup menu (although can be assigned to a button) and disappears as soon as you half-press the shutter release. Far better I think if it were an option integrated into the shooting information display (above). The tilt sensor can also (perhaps more practically) be displayed on the top LCD panel or inside the viewfinder (using the exposure scale) if it is assigned to the Fn button.
|Viewfinder indication: strong tilt||Viewfinder indication: mild tilt|
|Viewfinder indication: no tilt||Top panel indication|
You can choose for the D3X to display a review of the image taken immediately after shutter release. The type of display used will be the same as the last mode used in playback (histogram, thumbnail index, details etc.). Note that record review has all of the functionality of playback mode, this means its easy to delete, magnify, protect etc. The image will remain on the screen for the 'Monitor off delay' CSM c4 or until you half-press the shutter release.
Press the Playback button to enter playback mode, press the multi selector up or down to change display mode, up to six different pages of display detail are available. You can change the amount of information available in the basic and detailed photo display modes including optional blinking highlights and focus point display as well as the three pages of shooting information in detail mode. GPS detail can be displayed when a GPS device was used during shooting. Note that you can switch the up/down and left/right functions of the multi selector via CSM f3 and that you can choose to also use the command dials to browse / change page via CSM f7.
|Basic photo display: file number, folder, filename, date & time, quality, size||Basic photo display with optional Highlights and Focus point enabled|
|Detailed photo display: image thumbnail, histogram, exposure information and other data as per default display||Detailed photo display optional RGB histogram page|
|Detailed photo display data 1: metering mode, shutter speed, aperture, exposure mode, ISO, exposure compensation, focal length, lens used, AF mode, VR mode, flash mode and flash compensation||Detailed photo display data 2: white balance & fine tuning, color space, picture control and image parameter adjustments|
|Detailed photo display data 3: noise reduction, active d-lighting, retouching, comment|
To zoom in the D3X's playback mode you use the zoom / thumbnail button in combination with the rear command dial to select zoom amount (indicated by the yellow loupe box) and can use the multi-selector to move around the magnified image. There are eight zoom levels, on the high resolution screen the last two go beyond 1:1 and provide an enlarged pixilated view.
Playback thumbnail views
The D3X has two levels of thumbnail view, hold the zoom / thumbnail button and turn it to the left to switch to the initial 2x2 (4 image) view, turn once more for the 3x3 (9 image) view. Use the multi selector to move around the index. Note that if you have the 'Rotate Tall' option enabled images taken in the portrait orientation are displayed vertically (we had this option turned off in the captures below).
|One click right for a 2 x 2 thumbnail view||Two clicks right for a 3 x 3 thumbnail view|
Other Playback displays
|After pressing the delete button simply press once more to confirm the deletion||An example of a protected image|
- 18 Photographic tests (Noise)
- 19 Photographic tests (Noise)
- 20 Photographic tests (DR)
- 21 Photographic tests (DR)
- 22 Photographic tests (Falloff)
- 23 Photographic tests
- 24 Compared to
- 25 Compared to (JPEG)
- 26 Compared to (JPEG)
- 27 Compared to (JPEG)
- 28 Compared to (RAW)
- 29 Compared to (RAW)
- 30 Compared to (RAW)
- 31 Compared to (Higher ISO)
- 32 Compared to (Resolution)
- 33 Conclusion
- 34 Samples
Feb 19, 2009
Dec 1, 2008
Feb 14, 2012
Feb 14, 2012