You can choose for the D2X to display a review of the image taken immediately after shutter release. The type of display used will be the same as the last view mode (ie. histogram, thumbnail, details etc.). Note that record review mode has all of the functionality of playback mode, this means you can press delete to delete the image, press Enter to magnify etc. The image will remain on the screen for the 'Monitor off' time (CSM c5) or until you half-press the shutter release.
Press the Playback button to enter playback mode, press the multi selector left or right to change display mode (seven pages different modes available). Press the multi selector up or down to browse through images (this is virtually instant, no perceptible delay between each). You can choose to disable or enable certain display modes via the playback menu. Note that you can switch the up/down and left/right functions of the multi selector via CSM f3 and that you can choose to also use the command dials to browse / change information page via CSM f5.
|1: Default display (only folder and file number)||2: Folder, Frame count, Focus area|
|3: Data: Camera, Metering, Shutter speed, Aperture, Exposure mode, Exposure compen., Focal length||4: Data: ISO, White balance, White balance fine tuning, Tone, Sharpness, Color mode, Comment|
|5: Luminance & RGB Histograms (also available with blinking highlights and single color channels)||6: Blinking Highlights (single color channel can be selected)|
|7: Luminance histogram overlay|
Press ENTER to switch to magnification mode, use a combination of the thumbnail button, main command dial and direction controller to magnify and move around the magnified image.
|Press ENTER to switch to playback zoom mode, image is partially magnified||Hold the thumbnail button to display the overview image and magnifying loupe|
|Turn the main command dial to change magnification (and hence the size of the loupe) and the 4-way controller to reposition||Release the thumbnail button to display the newly selected area|
Playback thumbnail views
The D2X has two levels of thumbnail view, you simply hold the thumbnail button and turn the main command dial, one click right for a 2 x 2 (4 image) view, two clicks for a 3 x 3 (9 image view). Use the multi selector to navigate the images one at a time, hold the thumbnail button and turn the sub command dial to move a page at a time. If you leave the camera in this view mode it will keep it even for record review.
|One click right for a 2 x 2 thumbnail view||Two clicks right for a 3 x 3 thumbnail view|
Other Playback displays
|After pressing the delete button just press once more to confirm the deletion||An example of a protected image|
|Hold down the microphone button to record a sound annotation||If a sound is 'attached' to the image the delete button allows you to delete just the sound or both the sound and image|
Jun 1, 2005
Sep 16, 2004
May 23, 2008
May 23, 2008