Cinetics Lynx motion control system review
As an astronomer and visual artist, I use the arts to communicate science. My main way of doing this is through a series of Science & Symphony films that get presented with orchestras in concerts around the world. Since 2008 I have been shooting time-lapse sequences of the night sky and incorporating them into many of these films. My stills and sequences of observatories in Chile, the U.S., and the South Pole have also been featured in many science documentaries.
One way of giving time-lapse sequences a more cinematic look is by using a motion control system. These programmable systems move your camera with high precision as you shoot your scene. I have used several of them since 2008, so I was quite happy to preview this brand new system introduced by Cinetics.
The Cinetics Lynx is a light, portable and compact (yet sturdy) system that lets you program precise three-axis moves for video, stop motion, and time-lapse sequences. Its main components (slider, motors and motion controller) have their own soft cases for easy portability. You can even carry the slider preassembled in its own case to save time when working in the field. The standard length of the slider is 24 inches (61 cm), but an optional set of carbon fiber rails, stored in their own carrying case compartment, can be added to the kit for a total extended length of 48 inches (122 cm). The total weight of the system is under 13 lb (5.9 kg).
|The Lynx motion control system at its standard 24-in (61 cm) length. (Photo courtesy of Cinetics)|
It's apparent that a lot of thought was put into designing a system that takes only minutes —and a single hex key— to assemble. Extending the slider with the second set of rails and replacing the belt with a longer one takes approximately 5 minutes. The slider comes with a set of built-in legs to rest it on the ground or against a wall (when inclining it). The legs spread out at a series of pre-determined positions, which avoids having an uneven slider.
The motor units are very compact and each one requires a single screw to install. The motion controller can be attached to the pan motor via an ingenious snap-on attachment and the system battery is conveniently housed inside the motion controller. These two features avoid the need for installing additional support accessories and contribute to the simplicity and compactness of Lynx.
|Motion controller snapped onto the pan motor. (Photos courtesy of Cinetics)||Pan and tilt motors with motion controller.|
|Slider and adjustable legs.||Slider motor.|
When assembled to the 24 inch length, the system can easily be installed on a single tripod without the unit tipping over, even when the camera is at either end of the slider. My first test in the studio was to see how the system behaved using a single but sturdy tripod/head configuration. I used a Gitzo systematic tripod and ball head with hydraulic lock.
Despite the sturdiness of the system, images taken at either extreme of the slider – when mounted on a single tripod – may need to be rotated slightly in order to align them. For a load of 5.7 lb (2.6 kg) the images needed to be rotated ±0.6 degrees with respect to an image taken at the center of the slider. This can be corrected in post-processing by key framing image rotation and letting software interpolate the rotation angles.
I extended the Lynx slider to its 48in. length and took it to the Chicago Lakefront to shoot for a new film I'm producing. With two Gitzo carbon fiber tripods easily attached, I leveled the slider, and proceeded to program the system. Lynx includes an Arca-Swiss style camera plate to quickly set your camera and, on the Cinetics website, you can choose from a comprehensive list of cables to control the shutter.
Once set up, it's easy to program the motion controller. You simply slide the camera to the first position, adjust the pan and tilt as desired, and save the position as your first keyframe. Then, you slide it to the second position, adjust the pan and tilt, if necessary, and set your next keyframe. Once the beginning and ending keyframes are established, you can program the parameters for your time-lapse sequence, including duration between keyframes (time), shutter speed, and the interval between shots.
From L to R on the slider: slider motor, tilt motor, pan motor with controller snapped on and a Nikon D5 with an Arca-Swiss style camera plate.
The controller's display shows you the total number of resulting shots. One thing that impressed me about the Lynx motion controller is that it not only lets you set up at least 5 keyframes, but it lets you program a different set of sequence parameters between each pair of keyframes! For example, you could program sets of keyframes in order to progressively change the exposure and interval times throughout a time-lapse – useful if you know that the lighting conditions are going to change during the sequence.
There are two motion modes available: shoot-move-shoot (S-M-S) mode and continuous mode. In S-M-S mode the camera is moved only between shots. In continuous mode, however, photographs can be taken as the system moves. This is useful for taking video or time-lapse sequences that incorporate motion blur. You also have the option of ramping up and down the motion speed when shooting video and time-lapse in continuous mode. (The S-M-S time-lapse mode has a built-in ramp, but unfortunately, it is not adjustable at this point.) Each segment of the programmed motion can have its own kind of motion. For example, you can have an S-M-S segment followed by one with continuous motion.
Once you have programmed a motion you have the ability to save it as a preset for later recall. When you're ready to start the sequence simply choose Run, step back, and voilà!
Finally, you also have the ability of continuing a sequence by reversing the motion (called bounce) as many times as you want. This is a great feature, but I wish it were possible to bounce the motion after a sequence has started, since this is something you might decide to do once shooting is in progress. Other systems let you do this, and also give you the ability to tell the camera to continue shooting even after it has reached the last keyframe.
Another thing I would like to see in a future software update is the ability to quickly preview the entire run in continuous mode. Even when the intent is to take a time-lapse sequence one could quickly preview the motion by shooting video and tweaking the motion, if necessary.
I decided to use the Lynx to take a time-lapse sequence by centering the field of view on Henry Moore’s sundial in Chicago, moving my camera from the left all the way to the right end (over a period of 17 minutes), while panning my camera to the left so I could keep the sundial at the center of the frame. The combination of slide and pan resulted in the illusion of the camera moving along an arc around the sundial when the displacement motion was actually along a line.
I then set up a time-lapse of Anish Kapoor’s Cloud Gate (the reflective sculpture nicknamed The Bean) in Millennium Park. Have in mind that the farther your main subject is from the camera, the harder it will be to notice parallax (the displacement in the apparent position of an object viewed along two different lines of sight).
|The Lynx system extended to 48 inches (122 cm) in length and supported by two Gitzo carbon fiber tripods. Location: Millennium Park, Chicago|
Nevertheless, for the particular composition I had in mind, I avoided getting too close to the sculpture. I slid and panned the camera to the right while tilting it up (in order to end up with less ground and more blue-hour sky) over a period of 20 minutes. Taking advantage of the dark blue that remained in the sky, I also placed the system right in front of Cloud Gate and simply tilted the camera up over a period of 8.4 minutes.
Note that the Lynx system can be used vertically or inclined, though when inclined you can only point the camera along the direction of the slider if you want to avoid an unleveled horizon. If, for example, you wanted to shoot perpendicular to the direction of an inclined sliding motion then you would need a leveling wedge (not included) to compose your shot.
One has the option of programming the Lynx motion controller via Bluetooth with a smartphone app. Having two options for programming the unit is very welcome but, surprisingly, I thought that programming the controller using the app was less straightforward and somewhat confusing, but the app's GUI was re-designed after I tested it. There’s definitely room for improvement in future versions of the Lynx app. Having said that, I like that on the app one can control the exposure values to a fraction of a second and use the smartphone's IMU (a combination of accelerometers and gyroscopes) to slide the cart.
In conclusion, the Lynx is a light, portable, and sturdy three-axis motion control system that can be set up very quickly. Its relatively light weight and compact design lets you carry it around in the field very easily, and its smooth and precise motion can be programmed with multiple keyframes. I can definitely recommend this motion control system and I look forward to future firmware and app updates.
Cinetics is offering Lynx through a Kickstarter campaign, with pledges ranging from $499 to $1499 depending on which features you want.
- Light and compact
- Quick and easy set up
- Lets you program at least 5 keyframes, each with independent set of parameter values and motion modes
- Ability to save presets
- Leveling wedge is not included
Updates I'd like to see:
- Ability to preview motion in continuous mode
- Ability to edit parameters in saved presets
- Ability to adjust ramping on S-M-S time-lapse mode
- During a sequence in progress, ability to decide what to do once the camera has reached the last keyframe
José Francisco Salgado, PhD is an Emmy-nominated astronomer, science photographer, visual artist, and public speaker who creates multimedia works that communicate science in engaging ways. His Science & Symphony films have been presented in 175 concerts and lectures in 15 countries.
José Francisco is a seasoned night sky and aurora photographer and filmmaker. If you would like to view, photograph, and learn about the Northern Lights then you can inquire about his Borealis Science & Photo Tours in Yellowknife, Canada.
|MKP_Tetons by DaveedoSr|
from Color vs B&W
|long-horn beetle... by gee-jay|
from -Insect and Flower- (Macro photography in Full Colours)
|Ippo watch by erny|
from Diver watch
|Pont du Gard by Jerlad|
from Light 'em Up
|Rust Never Sleeps by ed rader|
The Apple iPad has always been a tempting tool for photographers on the go: slim, lightweight, and now with the current iPad Pro models, powerful enough to do most photo tasks you'd accomplish on the desktop. The software isn't quite there yet, but the next release of iPadOS should bridge that gap.
Ever get those moments when all your creativity leaves you? Yes, well so do we all. Here YouTuber Jamie Windsor shares his tips for getting back on track
Colin Goudie is a film editor with a career spanning over 35 years, known most recently for his work on Rogue One: A Star Wars Story. He talked with DPRevew about editing movies back in the film days, and the transition to a fully digital workflow.
Photographers used to do crazy things like smear petroleum jelly on their lenses to create interesting photos, but thanks to the Lensbaby Omni you can get those same effects without plopping goo on your glass. Join Chris and Jordan for some creative photography.
The ‘Overall’ winning shot was captured with a DJI Phantom 4 Pro, marking the first time the winning image has ever been captured with a drone.
The system can simulate the camera's movement and the set lighting to perfectly match the background with the scene.
Optical Character Recognition (OCR) isn't new technology, but this does mark the beginning of an era where you can search for text found within your images hosted on Google Photos.
Photographer Aryeh Nirenberg used an astro-modified Sony a7S II to capture the 1,100 images that went into making this 55-second timelapse.
The Sony RX100 VII takes the place of its RX100 VA sibling as our top overall pick, while the Canon G5 X II replaces the Panasonic LX100 II as our alternate choice.
A recent screenshot from the German Nikon Professional Service website shows that only 1,000 of Nikon's 500mm F5.6 PF ED VR lens are being produced each month.
Viltrox has shared photos and specifications on its official Weibo account of three upcoming APS-C lenses for Fujifilm, Sony and Leica camera systems.
Weird lens aficionado Mathieu Stern quite literally got more than he bargained for when he paid just €2 for a rare projector lens that creates some of the most intense swirly bokeh we've ever seen.
The short video shows off the silhouettes of four new lenses — one large lens and three compact lenses — alongside two current Tamron Sony E mount lenses.
The Sony Cyber-shot DSC-RX100 VII is the most capable pocket camera currently on the market thanks to a combo of good image quality, smooth stabilized 4K and an industry-leading autofocus implementation. For these reasons it receives our gold award.
New top end calibration package aims to reduce waste when printing on difficult surfaces by making color measurement more accurate
Moment's new 37mm Cine filters are compatible with various models of iPhone, Pixel, OnePlus and Galaxy devices.
Instagram has dismissed another viral spam image that is circulating on its platform, this one claiming that, starting tomorrow, all user content will be made public (including deleted messages) and that the company will be able to use images against users in court.
The upcoming products are designed to create a ‘complete line of photo and video products’ designed for photographers of all levels.
Sony's FE 35mm F1.8 answers a lot of a7-series photographers' prayers. But was it worth the wait? Find out in our full review.
Nikon has finally made it possible to transfer Raw images from their Wi-Fi-capable cameras to smartphones and tablets running the new SnapBridge 2.6 application.
DroneDJ conducted a comprehensive search of DJI's official online store and noticed most models were out of stock.
The new app, which is limited to iOS, for the time being, makes it easy to deliver images to clients, who can easily sort through and download images on-the-go.
The adapter uses a six-element design to make the most of even the fastest Hasselblad V lenses on Fujifilm's GFX mount camera systems.
Huawei's upcoming high-end devices are likely to catch up with Apple and Samsung in terms of 4K video frame rates.
In this video we’ve traveled to southern Spain with the Olympus OM-D E-M1X. There, we headed for the town of Sevilla to meet up with action sports photographer Fernando Marmolejo.
Henry Diltz recounts how he became the official photographer of Woodstock and shares what it looked like through the viewfinder.
Canon Australia appears to have leaked two upcoming cameras in a pair of promotional videos - an ‘EOS M6 II’ and an ‘EOS 90D.’
The adapter sits inside the camera and compresses the lens image to fit the camera's Super 35mm sensor, and restoring the look of the original focal length of the lens
Sydney-based coder Greig Sheridan and his photographer partner Rocky have introduced Intervalometerator, an open-source intervalometer designed for deploying inexpensive remote time-lapse systems involving Canon DSLRs, Arduino and Raspberry Pi hardware.
The lens, set to ship later this year for a yet-to-be-determined price, is an update to Yongnuo's original 35mm F1.4 lens that adds an ultrasonic motor.