Samsung TL500 (EX1)

Announced Feb 20, 2010 •
10 megapixels | 3 screen | 24 – 72 mm (3×)
Samsung TL500 (EX1) Ask a question in forums about the Samsung TL500 (EX1).
Ask a new question
23
Questions
asked
3
Questions
answered
Filter questions by
« First‹ Previous123Next ›Last »
By: Marc-LZ (2 months ago)
Posted to: Samsung Talk
1
reply
I was playing with my TL500 and Yongnou flash. I had the flash in manual mode as well as the camera. The shutter speed was set at 1/125. Initially I had the aperture at 2.2. I then  tried to stop it down to 6.0. When I viewed the picture on the display the aperture was listed at 2.2. Can anyone figure out why it wasn't taking the pic at 6.0 as I had intended? Thanks, Marc.
8
replies
How does the RX10 handle portrait photography. I've only owned 2 digital camera's, a Konica-Minolta Z3 and a Samsung TL500. Both handled the needs I had at the time with the exception of portrait photography. Neither could produce much bokeh. I'm committed to fixing that with my next digital purchase and being strictly a hobbyist I'd like to avoid the SLR plunge so my question is, could the RX10 adequately fill the gap in the one area my other cameras have come up short?
3
replies
I have bought a used lens from ebay, 23mm f1.4, and on my xt1 when in continuous focus mode it just goes to manual focus, Ive done all the firmware updates.  Ive put the lens on my ex1 and it is stuck in manual mode. any ideas? some setting  somewhere? thanks
Peadingle
By: Peadingle (Jan 2, 2016)
Posted to: Samsung Talk
13
replies
The sensor of my EX1 is developing smears. It now has three as shown in the picture. I've Googled the problem but not found an answer to what causes them, as I don't think they are caused by dust. Any suggestions? I keep the camera as clean and dry as I can.   Smears on sensor
By: Monosokk (Sep 20, 2015)
Posted to: Mac Talk
5
replies
Hi! I use an Eizo SX2462W with the Eizo EX1 (Datacolor Spyder3, I believe) calibration device. My problem is that Eizo will no longer develop EasyPix for mac, meaning no support for the OS X El Capitan.  Is there any alternative software I can use for my EX1/Spyder3 device for hardware calibration? Thanks!
8
replies
I'm venturing into the world of studio photography and bought two kits yesterday. One is the Interfit EX150 MKIII 2 from B&H. While using it as a flash, I noticed an issue with what seemed like half of the flash being cut off. I re-positioned the flash several times and moved myself around as well. I decreased my shutter speed to 1/200-250 because I thought maybe it was an issue of flicker with the type of light. Nothing seemed to work. Below are a few examples of what I mean. M 1/400 F1.8...
2
replies
All I found 'recently' here was this from four years back.... Do you wonder what exactly the EX1/TL500's Dual Image Stabilization does? Is it some sort of computerized detection and correction of blur? I think I have the answer, and it does not involve any sort of magic--if fact, I'm tempted to say that any unique claims for this function at least border on the misleading. I took two sets of photos in our fairly dark basement: one set with the P setting, ISO100, optical IS on, and the other...
1
reply
And do all accessories described to fit samsung nx models work as well for the EX2F?
By: Jules UK (Jun 18, 2014)
Posted to: Samsung Talk
2
replies
Hi I seem to have lost the ability to select RAW on my EX1. I have tried various settings, including resetting the camera completely, but still can no longer select RAW, RAW+Jpg etc. It happened just I was about to go into a concert where I really needed RAW too :o( AND I got a great place near the front Grrrr.  I had been able to select RAW in the build up to the gig, but then used the flash briefly, switched that back off, and have not been able to get RAW since. Any ideas? Thanks Julian
3
replies
I was hoping some members here have some experience in transferring old print photos to digital photos and the limitations I may face using a Samsung TL500. To get to the meat, I have old photos and school class composites dating from the 1920s to about 1984.  There are no negatives and some are in bad shape.   The prints I physically have in my possession range from probably 3"x3" all the way up to (roughly) 4'x4' school composites.  I'm using the large 4'x4' composites because nothing else...
Filter questions by
« First‹ Previous123Next ›Last »