Epson Stylus Photo R3000 Q&As

Professional printer | Inkjet |
Epson Stylus Photo R3000 Ask a question in forums about the Epson Stylus Photo R3000.
Ask a new question
19
Questions
asked
1
Questions
answered
Filter questions by
« First‹ Previous12Next ›Last »
7
replies
Hi, I am facing inaccurate results when exporting NEF photos as JPG from Darktable, and printing on EPSON R-3000. I read a great deal about color management and Darktable configuration and using standard, recommended values: output color profile as sRGB, and printer color management set to off. In essence, the printouts lack yellow and red tones. It is not about old ink cartridges, print head cleaning, modified WB or incorrect paper type or black ink. The EPSON ICC profiles are installed in...
9
replies
Hi, I am using an Epson R3000 and want to print a special run of images. In various articles it has been stated that a cable connection will increase quality and speed. I have both a USB and a Ethernet cable. Firstly is the supposition that cable is better true and, if so, which is the better option? I wanted to give all three a try and see if I can tell the difference but I have been unable to change my printer from its present WiFi configuration to a cable configuration. I would prefer to...
3
replies
I have inherited an Epson R3000 with Fotospeed inkflow system. The printer hasn't been used for on year. I was looking forward to using it as a) I've been restricted to A4 until now in our club competitions b) it is a step up in quality and c) I have also inherited a lot of expensive A3 paper. I know the printer was working ok when last used as my father has loads of prints from it which are very good. I've installed the drivers on windows 10 and attempted a nozzle check. It prints but it is...
0
replies
Hi, So to cut a long story short I bought an Epson R3000 printer & now it's giving me an 0x80 error, I have found someone fairly local with another R3000 that he has removed the head from. He wants £20 for the rest of it.  Is it possible for me to simply swap either the head from my printer into his or the main board from his printer into mine to see which part is faulty or give me a working printer? So is it just a straight swap? No specific type of head needed for a specific board? or no...
1
reply
Hi!  I changed a setting last week trying to print a B&W photo.  I finally gave up.  Now, when I print my color photos, they start looking like a negative.  I've cleaned the head cleaning as well as print head alignment (previous print had lines throughout).  I've even reset the defaults and checked for a new driver.  Sample of print on glossy paper.  Made sure the paper selected matched the paper being used.  I've even tried plain paper and luster.  Printing from Adobe; but have also just...
2
replies
I am printing from an iMac with El Capitan with current Epson software. The photos I want to print are edited and resized, ready for the final touch, some output sharpening. I am trying to match up the settings for the Printer Resolution inkjet settings for NIK Sharpener Pro 3 (1440x720, 1440x1440, 2880x1440, etc) with the settings in the Epson R3000 printer dialog box (which are just 1440, 1440 (TWICE!) and 5760, NO 2nd number). In the Printer Settings dialog, I have the following Output...
1
reply
Hi everyone Im looking for a decent printer and have had my eye on the r3000 for some time now, Im a design student and looking to print my own magazine layouts. My designs are heavy in photography and the laser printers (which are good for text) just dont cut it for photography. I wanted to see whether the r3000 might do a better job at the photos but also manage to still print text relatively well. I'd like to send you a pdf of some of my layout 4 x a4 sheets. here is an example of what I'm...
6
replies
Hi My R3000 is now on matte black and when I want to switch to Photo Black it gives the message 'empty cartridge'. When I place another cart in it it still gives the same message. Is there a way to reset or something like that the printer so it will recognize the cartridge? Thanks Ferdinand (ps I use Inkrepublic CSS system)
28
replies
Answered
Hi, I can't figure out why my Epson R3000 is printing my b&w in a greenish color. And it is not like there is an even green cast, it's green only in the darkest areas. I have had good b&w prints all week, letting 'printer manage color' with advanced b&w. I didn't change any settings/paper/the way I made the b&whites before they suddenly started coming out greenish. The printer is low on light light black, but I haven't been asked to change it yet. But could this be it? I am not keen on...
3
replies
I am printing on an Epson R3000 from Photoshop. My question is: can I (how can I) use an ICC profile for my Canson rag photographique paper when printing in advanced B&W? I have the profile for the paper installed, but I am not allowed to choose the profile when Color handling is set to "printer manages colors". And I have to use "printer manages color" when i want to use the advanced B&W? Or is my only option "Photoshop manages colors", and then do all the Color Settings-things correctly in...
Filter questions by
« First‹ Previous12Next ›Last »