Megapixels. How did such a simple concept become so wrapped up in hyperbole, controversy and confusion? Compact camera manufacturers act like everyone needs more of them. Photography pundits generally wish there were less. Smartphone manufacturers are completely unable to agree where they stand on the issue. The current generation of premium smartphones includes a 4MP model from HTC, 8MP from both Apple and Google, 13MP from Samsung and LG, 20.7MP Sony and 41MP from Nokia. Surely they can’t all be right?
So how many megapixels do you really need? It’s a simple question without a simple answer, but let’s start by breaking it down into two parts. If we take the assumption that more detail is generally welcome, at what point is there no practical benefit to the user? Then there’s the issue of technical limitations. How many megapixels can a smartphone deliver before the drawbacks outweigh the benefits?
Before we tackle these questions, let’s make sure we’re talking about the same thing. A megapixel rating tells you how many pixels there are in a photo. If it measures 4,000 by 3,000 pixels, multiply the two numbers to get 12 million, so it’s a 12-megapixel photo.
It’s worth noting that a 24MP photo isn’t twice as wide as a 12MP photo. It’ll have twice as many pixels, but that means it’ll only be 41% wider and 41% taller – in this case, that’s 5,656 x 4,242. Similarly, if you halve the width of a 12MP photo, to 2,000 x 1,500, the megapixel rating drops to a quarter, or 3MP. As such, the differences between a 4MP, 8MP, 13MP and 41MP photo perhaps aren’t as big as the numbers might suggest.
How many megapixels are sufficient for the average smartphone user?
These days, most photos are shared on social media services and viewed on computers, TVs, tablets and phones. The resolution of these screens varies from around 1MP for a typical smartphone to just over 3MP for the Retina Display on an iPad. A large number of TVs are Full HD (also known as 1080p), which works out at 2MP. A lot of computer monitors and an increasing number of phones and tablets use this resolution, too. The biggest screens around are 4K TVs, which equate to 8MP. They’re ridiculously expensive at the moment, but they’re bound to become more affordable and commonplace over the next decade.
On this basis, the most megapixels you’re likely to need to show your photos at their best on today’s electronic displays is 3MP. If you want them to look great for decades to come, you might want to shoot them at 8MP.
If you print photos out, the demands are similar: 300 pixels per inch (ppi) is widely accepted to be as sharp as the eye can see for photo prints. A 5x7-inch photo at 300 ppi weighs in at 3MP, while for an A4 print it jumps to 9MP. Even an A2 poster print at 300 ppi is only 35MP – still less than the 38MP photos from the Lumia 1020.
The graphic below shows how these sizes stack up – red for displays, blue for print sizes and green for the photo resolutions of the four smartphones that we’re concentrating on in this feature. The figures are included below for reference, too. A 4MP image can contain enough detail to fill an iPad screen or produce sharp 5x7-inch prints. It’s only when you get to A4 enlargements or 4K TVs that higher resolutions become necessary. Even then, 8MP is perfectly sufficient.
- iPhone 5 1,136 x 640 0.7MP
- Full HD 1,920 x 1,080 2MP
- iPad Retina Display 2,048 x 1,536 3MP
- 4K TV 3,840 x 2,160 8MP
- 7x5in print at 300ppi 2,100 x 1,500 3MP
- A4 print at 300ppi 3,508 x 2,480 9MP
- A3 print at 300ppi 4,960 x 3,508 18MP
- A2 print at 300ppi 7,016 x 4,9603 35MP
Smartphone camera resolutions
- HTC One 2,688 x 1,520 4MP
- Apple iPhone 5, 5c, 5s 3,264 x 2,448 8MP
- Samsung Galaxy S4 4,128 x 3,096 13MP
- Nokia Lumia 1020 7,136 x 5,360 38MP
Nothing is ever that straightforward, though. For one thing, hardly any smartphone cameras include an optical zoom. Digital zoom has its place, but the best it can ever do is guess what the extra detail should look like. However, if the photo resolution is much higher than you need it to be, you can crop the photo and still have enough megapixels for a detailed image.
This can be done manually in editing software, and it’s also how the zoom function on the Nokia Lumia 1020 works. It can shoot 38MP photos, but switch to 5MP and you can zoom by up to 2.7x – there’s still a pixel on the sensor for every pixel in the photo, so no digital interpolation (read guesswork) is necessary.
It’s worth noting that applying a 2x digital zoom means you’re only using a quarter of the surface area in the center of the sensor – half of its width and half the height. So for an 8MP camera, applying a 2x digital zoom means you’re effectively capturing a 2MP photo. In most cases, this will be raised back up to 8MP using interpolation.
We recently looked further into the Lumia 1020's zoom image quality in our 11-page review of the device; see the section on image quality and performance to learn more.
Another reason for choosing a resolution beyond 3MP is that digital cameras rarely capture the sharpest possible details per pixel. On a smartphone camera’s sensor, each pixel measures either red, green or blue light. These colors are arranged in a mosaic layout, typically with two green, one red and one blue in a two-by-two grid (read more about this here). The camera’s software must then calculate a full-color value for each pixel, but ultimately there’s always a bit of guesswork involved. If you wanted a genuine full-color measurement for each pixel in your final image, you’d need to drop the resolution to a quarter of the original.
Detail can also be lost due to anti-alias filtering. This is to avoid artifacts such as moiré and false color, where the details in the scene cause interference with the regular grid of pixels on the sensor (more information here). In a digital camera, anti-alias filtering essentially involves gently blurring the image to hide these artifacts, and then sharpening it up again digitally.
In practice, all this digital processing for creating full-color, artifact-free photos is pretty sophisticated, and the best cameras are perfectly capable of capturing sharp details. However, reducing the resolution using a high-quality resizing algorithm does tend to give crisper details per pixel. As such, shooting at 8MP and dropping the resolution to 4MP will often give crisper fine details than shooting with a 4MP camera.
We’re now ready to answer the question of how many megapixels are useful in practice. For most sharing destinations, 3MP is fine, while 8MP is enough for A4 prints and 4K TVs. However, to achieve the crispest possible details, you might want to scale these figures up a bit. If you want to crop the photos – especially if your camera lacks an optical zoom – there’s no upper limit to the number of megapixels that might be useful.
How many megapixels can a smartphone realistically deliver?
It’s all very well wanting something, but that doesn’t mean you can have it. There’s a reason why 1,000-megapixel cameras don’t exist, and it’s not because no one wants them (in fact, gigapixel photos are popular – they’re made by stitching hundreds of photos together).
There are three technical limitations to raising the megapixel rating of a camera in an effort to boost quality. One is simply that a higher resolution takes longer to process and consumes more storage space. Cameras' and smartphones’ processors are getting more powerful and memory cards are getting bigger and cheaper, but there still needs to be a balance between resolution and the practicalities of saving the images.
Another limitation is the sharpness of the lens. There’s little point in capturing more pixels if all they’re recording is a blurry image. At the current resolutions offered by smartphones, we’re already seeing lenses that struggle to maintain sharp focus throughout the frame. Details are usually pretty sharp in the center but they tend to fall off slightly towards the edges. That’s not necessarily a disaster, as the main subject is usually somewhere near the center. However, it stands to reason that there would come a point where increasing the resolution would only capture the defects of the lens in increasing detail.
Then there’s the thorny issue of sensor noise. This is caused by inaccuracies in the measurements for each pixel, and it takes the form of a speckled graininess across the image. Digital cameras try to mask it with noise-reduction processing, but it’s hard for a camera to distinguish between unwanted noise and fine details in the scene. As a result, noise reduction also removes some of the fine detail from a photo. In dimly lit scenes, the camera must boost the exposure, and this boosts noise levels too. That’s why low-light photos often look grainy or exhibit smudged, syrupy details – the telltale signs of aggressive noise reduction.
It’s especially true of smartphones and budget compact cameras because their sensors are physically very small. A small sensor has a small lens sat in front of it, which captures less light than a bigger sensor and lens. Without getting bogged down in the physics, it’s clear that an SLR’s lens gathers much more light than a smartphone’s tiny lens. If both cameras have the same resolution, each pixel on the smartphone’s sensor has a tiny amount of light to measure. It’s harder to measure something accurately when it’s very small, so inaccuracies – and noise levels – are higher.
If you doubled the number of megapixels on a camera’s sensor, you’d halve the amount of light that each pixel would have to measure, which means even more noise. In fact, it might well be more than double as you’d have to find room for all the extra ancillary components on the sensor too. So while increasing the resolution seems like it should boost the amount of detail captured, there’s a chance that the resulting stronger noise reduction would actually decrease the detail levels.
However, it is possible to increase the resolution without boosting noise levels if you also increase the physical size of the sensor. This explains why SLRs are able to offer 24MP and higher resolutions but still deliver lower noise than compact cameras with their tiny sensors.
It also explains why the Nokia Lumia 1020 is able to capture 38MP photos that aren’t completely awash with noise. Its high resolution is matched by a 1/1.5 inch sensor – that’s twice the diagonal and four times the surface area of the 1/3 inch sensors that are commonly used in smartphones. It’s a bit like taking four conventional 10MP smartphone sensors and arranging them in a two-by-two grid.
The HTC One takes the opposite approach with its 4MP sensor. It’s a conventional 1/3 inch size, but because each pixel has more light to measure, its noise levels are significantly lower than from sensors with more densely packed pixels. Then again, merging multiple pixels averages out noise levels, so resizing a 12MP sensor’s output down to 4MP also helps to reduce noise.
This is a can of worms that we’ll quickly put the lid back on – debates about pixel density will surely go on forever. It’s the overall physical size of the sensor and lens which play the biggest role in determining the amount of noise for a given print or screen size.
The bottom line
So how many megapixels do you need? Here’s the shortest answer we can muster: for most purposes 3MP is plenty, but you might want to shoot at around 8MP for the crispest possible details. 8MP is a sensible minimum for big prints and 4K TVs, and even higher resolutions allow you to crop photos without sacrificing quality too much. However, make sure that very high resolutions are matched by an equivalent increase in sensor size.
Of course, image quality is also defined by the design of the sensor, the quality of the lens, the intelligence of the metering and automatic exposure system ... the list goes on. It’s a good job, because if you could tell a camera’s quality just by its megapixel rating, we’d be out of a job.
Sep 16, 2016
Sep 15, 2016
Sep 14, 2016
Sep 13, 2016
|Steamin' Mad by ahrensjt|
from Angered Subjects (Street Photography)
|Smile by Olymguy|
from Ultra Asian Indian Female Faces
|Space Shuttle Cockpit- by vbuhay|
from Aircraft Control Stick
The Polish town of Katowice is not known as an area of beauty, but as all photographers know, that doesn't mean that beauty can't be found if you know where to look. Mariusz Pietranek used a drone to look down on the colorful sedimentation tanks at an ironworks.
New York Times video journalist Ben Solomon spent a harrowing three weeks accompanying Iraqi Major Sajjad al-Hour as he and his men fought to retake Mosul from I.S. forces.
The 3D VR camera launched through a crowdfunding campaign in 2015 goes on sale beginning June 26.
Noctilucent clouds, a crescent moon and Venus were visible in the pre-dawn sky over Budapest yesterday. Photographer György Soponyai captured NASA's astronomy picture of the day.
Squirming pets won't sit still for photos? A Kickstarter campaign is looking to help.
Find out how Chris Burkard shifted from editorial photography to his true passions: landscapes, conservation and, of course, surfing.
The updated EyeEm app scans your camera roll and picks images that are composed particularly well, have the best quality, or highest chance of selling on EyeEm Market.
It's three years old but still a solid option for a Micro Four Thirds shooter looking for a high-quality, fast, wide-angle prime. Take a look at how we got along with it.
Tamron has announced the longest all-in-one zoom lens currently available, the 18-400mm F3.5-6.3 Di II VC HLD. Designed for Canon and Nikon crop-sensor cameras, the lens will be available in July.
When you're ready to step-up to full-frame from an entry-level or midrange camera, the choices can be overwhelming. Find out which models came out on top in our $1200-2000 enthusiast ILC roundup.
Just a guy wearing a VR headset, smashing invisible Goombas in Central Park.
NASA's Mars Reconnaissance Orbiter captured this gorgeous aerial photo of the Martian landscape. And if you look really close, you can actually see the Mars Curiosity rover in the very middle.
The city of Laguna Beach, California has provided some clarification around the kinds of photography permits it offers.
Later this year, a VR180 camera will be Joining Yi's Halo and 360 VR cameras, which will offer stereo 3D capture, yet be as easy to use and compact as a 2D camera.
Caltech researchers have developed an 'optical phased array' chip that uses time delays instead of a lens to focus the incoming light.
Pricing and shipping have finally been revealed for two highly anticipated lenses from Sigma, announced in February.
These macro photos of clouds of paint billowing through clear water might look like high-quality CGI, but they're real photographs. And photographer Alberto Seveso told us how they were made.
Facebook is testing a feature that prevents people from saving, sharing, or even taking a screenshot of your profile picture.
We've reshot the Sony a9 in our studio. The short story: it's sharper! The long story... well you can read it all here.
The collection will be officially launched during the Europeana Transcribathon Campus Berlin 2017 crowdsourcing event which will be held on 22 and 23 June at the Berlin State Library.
Light gives us some insight into the preparations for the launch of the pre-order shipments of its much anticipated L16 multi-lens camera.
OnePlus co-founder Carl Pei has confirmed in a tweet that the second lens on the back of the OnePlus 5 uses a 1.6x optical zoom and that digital zoom is used to reach the claimed 2x zoom factor.
Fujifilm recently unveiled the second in its series of affordable cine lenses, the MK50-135mm T2.9. We got our hands on it for a couple days and took it for a spin.
Leica's first attempt at an M-series digital rangefinder was rough around the edges, but set a pattern for all of the cameras that came after it. In this week's Throwback Thursday article, Barney remembers the M8.
No stranger to extreme situations, legendary climber and filmmaker Jimmy Chin talks to Outside Magazine about his career, and the challenge of filming Alex Honnold's rope-free solo climb of El Capitain.
A company backed by Android co-founder Andy Rubin is attempting to make video conferencing less terrible.
Rangefinder magazine asked five professional portrait and wedding photographers about posting on Instagram; no surprise, they got five different answers.
This captivating stop motion film was created by stripping away one layer of wood at a time. It's hard to look away.
It will enable users to simulate the presence of the sun, moon and Milky Way and see how they interact with an area's topography.
Since its introduction in November last year Instagram's live streaming feature has been used by millions, but videos could not be archived for watching at a later stage. A new update has now added the capability.