Maintaining a legacy or building for mirrorless, who benefits?
|If Canon makes a full-frame mirrorless camera, should they forego some of the potential size benefits to maintain full EF-mount compatibility? And just how compatible would it be?|
More than ever, rumors are circulating that Canon and Nikon are finally going to take mirrorless seriously by building full-frame mirrorless cameras. These rumors, which may well turn out to be nonsense, all seem to suggest that these cameras will be built around the companies’ respective DSLR mounts.
It’s an interesting quandary: develop a new, space-efficient mount or stick with your existing system?
I’m going to argue that the right answer is much clearer for a manufacturer than for the end consumer. And I think I can guess which option we’re likely to see.
Supporting your legacy
The benefits of supporting your legacy mount seem obvious: the manufacturer gets to keep selling their existing lenses and the consumer ends up with a huge range of lenses to choose from. Surely there’s no conflict there?
The advantage of all (or most) of an existing system’s lenses being compatible from day one seem overwhelming. Plenty of choice, the ability to sell mirrorless cameras to existing lens owners and no reputational damage. Everybody wins, right?
The problem with building a mirrorless camera with a full-depth mount goes deeper (pun intended) than all of your mirrorless models being bigger than necessary. That said, even people who prefer larger cameras are usually referring to grip depth and spacing of controls, rather than demanding their camera has a big box of fresh air in the middle of it, for no functional reason.
A question of focus
No, the bigger issue is that most DSLR lenses aren’t designed for mirrorless. I’m not just talking about some designs being larger than necessary, I’m talking about the use of focus motors that are great for DSLR phase detection but that are woefully clunky when driven using contrast detection AF. Secondary sensor AF, as used and painstakingly optimized for DSLRs is very effective at telling the lens where it needs to move its focus elements to. The ring-type ultrasonic motors used in most high-end DSLR lenses are great at responding to such a command.
Contrast detection asks very different things of its lenses. Instead of racing to a particular point, they need to smoothly scan through their focus range then perform a series of back-and-forth movements to find perfect focus. The result tends to be more accurate but requires a lightweight focus element and a very differently type of focus motor.
|The K-01 used a full depth Pentax K mount which gave instant access to lots of lenses. Unfortunately, none of them had really been designed with contrast detection in mind...|
The alternative approach: on-sensor phase detection, is in its relative infancy. It may be able to make better use of existing lenses with ring-type motors, but it’s still not clear how well it can interpret significantly defocused scenes.
Also, at present, most on-sensor phase detection information is fed into what are more precisely described as 'Hybrid' AF systems: they get very close to focus using phase detection then perform a CDAF hunt to confirm the optimal position. Perhaps this will change, hopefully without the loss of the precision that mirrorless AF tends to excel at, leaving us just with the size disadvantage.
|It's notable that, when it's trying to build fast-focusing lenses for its mirrorless E-mount, Sony doesn't tend to use ring-type focus motors. In the case of the 16-35mm F2.8 GM, it uses twin piezoelectric actuators.|
Alternatively, of course, there's a risk of building a system that prioritizes backward compatibility over maximizing performance. It's noticeable, for instance, that Sony makes very little use of ring-type focus motors in the lenses its developing for the E-mount, despite having experience of using them for its DSLR A-mount.
‘It fits’ isn’t the same as ‘it’s good’
Either way, there's a risk that we'll be offered something that fits but doesn't necessarily work as well as it could.
As an enthusiast photographer with limited lens-buying resources, one of the things that has always irritated me is seeing camera companies produce high-end lenses for their full-frame customers and carefully marketing the idea that this benefits all their users, so they need not develop anything good for their APS-C users. It’s a situation that leaves APS-C users with poor choices and the arguably false impression that by buying these poorly-suited lenses, they’re making progress along an upgrade path (a fallacy that benefits the camera makers more than the photographers).
The decision to adopt a new mount or continue with a legacy one risks the same thing: the appearance of lots of choice when what you’re actually being offered is compromise, and a situation with limited incentive for the manufacturers to dedicate their efforts towards the needs of their mirrorless users. Instead they can produce a lovely picture of their mirrorless camera flanked with 30 years’ worth of lens development and watch as brand loyalists insist that ‘their’ system has the most lenses, regardless of performance.
And this wouldn’t necessarily only apply to existing lenses. Let’s say Manufacturer X needs to develop a new fast 70-200mm F2.8 and the focusing design that would work best for mirrorless turns out to be slower than the one that suits the company’s flagship sports DSLR, which version of the lens do you think we’d see?
There is something of a precedent for this. Canon got its reputation badly burned by abandoning its FD mount – something it took some photographers a long time to forgive –whereas Nikon and Pentax pressed on with progressively trying to modernize their 1950s and 70s film mounts.
Taking the hard decision arguably left Canon in the better position: the long-term benefit was a wide-throated, all-electronic mount. With the introduction of its latest ‘E’ lenses, Nikon’s venerable F-mount has finally caught up: with autofocus and aperture operated by the lens, but with a complex series of compatibility issues cropping up along the way. And, while they are still using a somewhat restrictively narrow mount at the end of it, they've benefited from not having to burn their users on the way (though they arguably handed-off responsibility for understanding the complexities of the F-mount’s development to every user looking to buy lenses).
So what’s the alternative?
|Olympus expressly made the E-M1 to provide continued support for its legacy system but also developed the 'PRO' range of high-end lenses to make full use of the capabilities of Micro Four Thirds cameras.|
The other way of doing things is to develop a dedicated mount and dedicatedly support it. This is the approach that Olympus took with the development of Micro Four Thirds and, to an extent, which Canon has with its EF-M mount. Olympus, along with Panasonic, took the brave step of designing a mirrorless-optimized mount when they developed Micro Four Thirds, rather than trying to press on with Four Thirds. They then offered an adapter to use the older lenses and, with the E-M1 and E-M1 II, developed cameras expressly with the intention of maintaining support for the older, outgoing system. This meant existing customers didn’t get too badly burned and new Micro Four Thirds customers got an increasingly impressive range of native lenses designed for them.
It’ll be interesting to see if Sony takes any pointers from this, as they decide how to support both E and A mounts.
I hope to be proven wrong
Perhaps I’ll be proved wrong in the end. Maybe Canon’s EF-M/EF cross-compatibility will end up reducing the incentives to develop interesting lenses for M series owners, in the same way that I worry sharing a mount would. Equally, perhaps Canon’s Dual Pixel AF (and Nikon’s on-sensor PDAF experience gleaned from its 1-Series cameras) will mean that there ends up being no AF compromise to sharing a mount. It may partly be overcoming this challenge that has led to its camera taking so long to arrive. At which point, using the existing mount would just mean carrying around a camera that’s a little lumpier than it needs to be.
Time, I’m sure, will tell. But, in the meantime, don’t necessarily take at face-value any promises that backwards compatibility is an unalloyed user benefit.
|Fairy garden by Jill Hancock|
|Avro Vulcan Heavy Bomber by cjf2|
from Seven types of aircraft - heavy bombers
The software uses computational imaging techniques to boost detail and dynamic range in your images, and reduce noise levels.
As part of a promotional giveaway, Fujifilm Korea has released kimchi-flavored instant noodles wrapped in branding inspired by Fujifilm Provia 100 color reversal film.
The Leica Noctilux-M 75mm F1.25 ASPH is a fast, high-quality and decidedly heavyweight short telephoto prime lens, designed for use with Leica's digital M-series rangefinders. We've been grappling with it for a little while - take a look at our sample images.
70-200mm F4 zoom lenses may not get as much attention as their faster F2.8 siblings, but for many photographers these lenses hit the perfect sweet spot of price, performance, and weight. This week, we shoot the new Tamron 70-210mm F4 alongside the equivalent Canon and Nikon models to see how they stack up.
Blackmagic recently worked with Apple to develop Blackmagic eGPU, an external GPU that brings "desktop-class graphics performance" to the new MacBook Pro laptops with Thunderbolt 3 ports.
Lightroom alternative Luminar has received numerous updates across both its Mac and Windows versions, primarily improvements to existing features, as well as support for additional cameras from Fujifilm, Sony, Olympus, Panasonic, Canon, and Pentax.
Sony has quietly updated its RX100 V, bringing a couple of the goodies from the RX100 VI travel zoom. The updated RX100 VA gains a new processor and various firmware tweaks but misses out on the VI's other hardware improvements.
Apple has updated its MacBook Pro series of notebooks with 15in and 13in models that are claimed to be better for intense image and video editing. The company says the new models are the most advanced ever, and that they feature 8th generation Intel Core processors for faster performance.
According to sources familiar with the matter, Adobe will announce a full-fledged Photoshop version for the iPad at its annual conference in October.
The last day to place an order for Apple photo prints and related products is September 30th.
Manfrotto has launched its new Noreg camera bag series with the Backpack-30 and Messenger-30 models. Both bags are designed for premium mirrorless camera systems, each featuring internal camera units that can be removed and used independently of the larger bags.
Industrial designer Thomas Müller has created a concept device that attempts to democratize film development using an all-in-one device that sits on your countertop.
Mastin Labs has released its latest set of presets titled 'Kodak Everyday.' The pack includes film emulation presets for iconic Kodak films, including Ektar, Gold and Tri-X.
Canon has released firmware update 1.0.4 for the EOS 6D Mark II, adding important bug fixes for "rare instances" of issues with the touch panel and operation buttons.
In an email to DPReview, Nikon Inc. has confirmed ''The Nikon 1 series cameras, lenses and accessories are no longer in production'.
Nikon's new Coolpix P1000 boasts an extraordinary zoom range and a suite of powerful stills and video features in a (relatively) compact body. We're taking a detailed look at this powerful compact's key features.
PhotoMirage, a new Windows application from software company Corel, transforms images into "mirages" by adding movement to elements like water or clouds. Unlike a cinemagraph, it does not require video footage – instead animating a single static image.
Tamron's version 2.0 firmware update for its 28-75mm F2.8 Di III RXD claims to have addressed reported issues with autofocus during video shooting.
Lens maker Moment is leaning into the software sector, launching a newly-revamped smartphone camera app targeted at enthusiast photographers.
A groups of researchers from NVIDIA, MIT, and Aalto University have developed an AI capable of removing noise and grain from images with incredible accuracy.
If the 24-2000mm equiv. zoom range on Nikon's Coolpix P900 just wasn't enough then you'll be excited about today's announcement of the Coolpix P1000. This camera has a once unthinkable 24-3000mm equivalent F2.8-F8 lens, though it's anything but light and will set you back $999.
Hong Kong flash system manufacturer Cactus has released new firmware for its V6 II Transceiver that will allow it to wirelessly communicate TTL information between a Canon or Cactus flash and a Canon camera. The X-TTL update makes it possible to trigger Canon flashes and retain full TTL control with that flash either on or off camera.
Want to create pro quality lighting for your videos, but don't have thousands of dollars to spend on expensive video lights? In this video, our friends over at ShareGrid demonstrate how to professionally light a model with some work lights, a bit of poster board and even a shower curtain.
Phase One has launched its new Latitude processing presets series, the latest addition to the company's Capture One Style Packs product launched last year. Both Latitude style packs contain eight presets, each with original, bright, and dark variations, for a total of 24 styles per pack.
Godox has announced the impending launch of its upcoming AD400Pro, a 400WS monolight with wireless shooting capabilities and a battery life of 390 full-powered flashes.
The instant camera market is heating up, and with four formats and 15+ cameras to choose from, we felt it was high time to examine them all and pick our favorite.
There's an old axiom in filmmaking which states that an audience will forgive a poor quality picture, but not poor quality sound. This week, Chris and Jordan bring in an audio pro to demonstrate why a cheap microphone positioned correctly will outperform an expensive model placed incorrectly.
With enough reach to land itself in 'travel zoom' territory, the Sony RX100 VI is well suited for a wide range of shooting situations. We've made a significant update to our initial sample gallery with plenty of samples from the past few weeks.
Hamm Camera Company has launched its second crowdfunding campaign to bring a fun, affordable pinhole camera to life.