Maintaining a legacy or building for mirrorless, who benefits?
|If Canon makes a full-frame mirrorless camera, should they forego some of the potential size benefits to maintain full EF-mount compatibility? And just how compatible would it be?|
More than ever, rumors are circulating that Canon and Nikon are finally going to take mirrorless seriously by building full-frame mirrorless cameras. These rumors, which may well turn out to be nonsense, all seem to suggest that these cameras will be built around the companies’ respective DSLR mounts.
It’s an interesting quandary: develop a new, space-efficient mount or stick with your existing system?
I’m going to argue that the right answer is much clearer for a manufacturer than for the end consumer. And I think I can guess which option we’re likely to see.
Supporting your legacy
The benefits of supporting your legacy mount seem obvious: the manufacturer gets to keep selling their existing lenses and the consumer ends up with a huge range of lenses to choose from. Surely there’s no conflict there?
The advantage of all (or most) of an existing system’s lenses being compatible from day one seem overwhelming. Plenty of choice, the ability to sell mirrorless cameras to existing lens owners and no reputational damage. Everybody wins, right?
The problem with building a mirrorless camera with a full-depth mount goes deeper (pun intended) than all of your mirrorless models being bigger than necessary. That said, even people who prefer larger cameras are usually referring to grip depth and spacing of controls, rather than demanding their camera has a big box of fresh air in the middle of it, for no functional reason.
A question of focus
No, the bigger issue is that most DSLR lenses aren’t designed for mirrorless. I’m not just talking about some designs being larger than necessary, I’m talking about the use of focus motors that are great for DSLR phase detection but that are woefully clunky when driven using contrast detection AF. Secondary sensor AF, as used and painstakingly optimized for DSLRs is very effective at telling the lens where it needs to move its focus elements to. The ring-type ultrasonic motors used in most high-end DSLR lenses are great at responding to such a command.
Contrast detection asks very different things of its lenses. Instead of racing to a particular point, they need to smoothly scan through their focus range then perform a series of back-and-forth movements to find perfect focus. The result tends to be more accurate but requires a lightweight focus element and a very differently type of focus motor.
|The K-01 used a full depth Pentax K mount which gave instant access to lots of lenses. Unfortunately, none of them had really been designed with contrast detection in mind...|
The alternative approach: on-sensor phase detection, is in its relative infancy. It may be able to make better use of existing lenses with ring-type motors, but it’s still not clear how well it can interpret significantly defocused scenes.
Also, at present, most on-sensor phase detection information is fed into what are more precisely described as 'Hybrid' AF systems: they get very close to focus using phase detection then perform a CDAF hunt to confirm the optimal position. Perhaps this will change, hopefully without the loss of the precision that mirrorless AF tends to excel at, leaving us just with the size disadvantage.
|It's notable that, when it's trying to build fast-focusing lenses for its mirrorless E-mount, Sony doesn't tend to use ring-type focus motors. In the case of the 16-35mm F2.8 GM, it uses twin piezoelectric actuators.|
Alternatively, of course, there's a risk of building a system that prioritizes backward compatibility over maximizing performance. It's noticeable, for instance, that Sony makes very little use of ring-type focus motors in the lenses its developing for the E-mount, despite having experience of using them for its DSLR A-mount.
‘It fits’ isn’t the same as ‘it’s good’
Either way, there's a risk that we'll be offered something that fits but doesn't necessarily work as well as it could.
As an enthusiast photographer with limited lens-buying resources, one of the things that has always irritated me is seeing camera companies produce high-end lenses for their full-frame customers and carefully marketing the idea that this benefits all their users, so they need not develop anything good for their APS-C users. It’s a situation that leaves APS-C users with poor choices and the arguably false impression that by buying these poorly-suited lenses, they’re making progress along an upgrade path (a fallacy that benefits the camera makers more than the photographers).
The decision to adopt a new mount or continue with a legacy one risks the same thing: the appearance of lots of choice when what you’re actually being offered is compromise, and a situation with limited incentive for the manufacturers to dedicate their efforts towards the needs of their mirrorless users. Instead they can produce a lovely picture of their mirrorless camera flanked with 30 years’ worth of lens development and watch as brand loyalists insist that ‘their’ system has the most lenses, regardless of performance.
And this wouldn’t necessarily only apply to existing lenses. Let’s say Manufacturer X needs to develop a new fast 70-200mm F2.8 and the focusing design that would work best for mirrorless turns out to be slower than the one that suits the company’s flagship sports DSLR, which version of the lens do you think we’d see?
There is something of a precedent for this. Canon got its reputation badly burned by abandoning its FD mount – something it took some photographers a long time to forgive –whereas Nikon and Pentax pressed on with progressively trying to modernize their 1950s and 70s film mounts.
Taking the hard decision arguably left Canon in the better position: the long-term benefit was a wide-throated, all-electronic mount. With the introduction of its latest ‘E’ lenses, Nikon’s venerable F-mount has finally caught up: with autofocus and aperture operated by the lens, but with a complex series of compatibility issues cropping up along the way. And, while they are still using a somewhat restrictively narrow mount at the end of it, they've benefited from not having to burn their users on the way (though they arguably handed-off responsibility for understanding the complexities of the F-mount’s development to every user looking to buy lenses).
So what’s the alternative?
|Olympus expressly made the E-M1 to provide continued support for its legacy system but also developed the 'PRO' range of high-end lenses to make full use of the capabilities of Micro Four Thirds cameras.|
The other way of doing things is to develop a dedicated mount and dedicatedly support it. This is the approach that Olympus took with the development of Micro Four Thirds and, to an extent, which Canon has with its EF-M mount. Olympus, along with Panasonic, took the brave step of designing a mirrorless-optimized mount when they developed Micro Four Thirds, rather than trying to press on with Four Thirds. They then offered an adapter to use the older lenses and, with the E-M1 and E-M1 II, developed cameras expressly with the intention of maintaining support for the older, outgoing system. This meant existing customers didn’t get too badly burned and new Micro Four Thirds customers got an increasingly impressive range of native lenses designed for them.
It’ll be interesting to see if Sony takes any pointers from this, as they decide how to support both E and A mounts.
I hope to be proven wrong
Perhaps I’ll be proved wrong in the end. Maybe Canon’s EF-M/EF cross-compatibility will end up reducing the incentives to develop interesting lenses for M series owners, in the same way that I worry sharing a mount would. Equally, perhaps Canon’s Dual Pixel AF (and Nikon’s on-sensor PDAF experience gleaned from its 1-Series cameras) will mean that there ends up being no AF compromise to sharing a mount. It may partly be overcoming this challenge that has led to its camera taking so long to arrive. At which point, using the existing mount would just mean carrying around a camera that’s a little lumpier than it needs to be.
Time, I’m sure, will tell. But, in the meantime, don’t necessarily take at face-value any promises that backwards compatibility is an unalloyed user benefit.
|Well Hello There by evancj|
from My Best Photo of the Week
|Normally Amsterdam by Rudolph Arnstein|
from Your City - Biking
|laboratory glass by bombelpl|
|57 BelAir Chevorlet by TexasGal|
from Car Shows 2018
Parent company Longsys has announced that Lexar will be back "in full production" and shipping globally this fall.
Owners of V-mount Hasselblad lenses will now be able to use their modern and historic glass on the front of the Hasselblad X1D. The XV adapter hinted at late last year has now been officially announced and will cost €199 / $249 / £179.
Scottish whisky producer Macallen has teamed up with photographic cooperative Magnum Photos to create a single malt whisky in collaboration with Steve McCurry, Martin Parr, Paolo Pellegrin, Mark Power, Gueorgui Pinkhassov and Alec Soth.
The photography competition seeks "pictures that show the importance of health in society and the impact health issues have on people and communities worldwide."
Nikon has posted another teaser video for its upcoming full-frame mirrorless system featuring some classic Nikkor lenses. Perhaps the most notable thing about the video is the lens that's shown first...
Following the CES 2017 announcement of its revival, Kodak Alaris has started shipping test rolls of its new Ektachrome to photographers for beta testing.
Take an inside look at the work that goes into testing Nikon cameras from drops, dust, water and debris. There were definitely cameras harmed in the making of this video.
In a press release issued this morning, Sony announced it has sold more full-frame cameras than any other brand in the US over the past six months, measured both by units sold and by value.
Yuneec has introduced the Mantis Q, a consumer drone with an integrated 4K camera, electronic image stabilization and voice control.
The new 3 Legged Thing Patti is a compact tripod that doesn't break the bank.
Alex and Kathryn are photographers, friends and Tokyo residents who love exploring Japan's hidden cultural treasures. They each brought a Canon EOS M50 on a recent trip starting in bustling Tokyo and ending in the peaceful riverside town of Gujo Hachiman.
The triple-camera in Samsung's 2019 Galaxy S10 smartphone is expected to use three sensors with varying pixel counts.
Net SE, the parent company behind the likes of Oprema Jena, Meyer Optik Görlitz, Emil Busch, C.P. Goerz, Ihagee and A. Schacht products has filed for bankruptcy and removed itself from the German stock exchange.
Canon's latest 70-200mm F4L comes with a five stops of image stabilization, a new coat of paint and impressive sharpness. We've been shooting with our copy for several weeks now - see how it stacks up in our sample gallery.
Special 4K and 6K Photo modes may be one of the most under-appreciated features on recent cameras. In this week's episode, Chris and Jordan take a closer look at these modes and explain why – and when – you'll be glad to have them on your camera.
Ten years ago this month Panasonic and Olympus announced a new concept called Micro Four Thirds. We're now on the brink of full-frame mirrorless from at least one major player, so perhaps it's a good time to take a look back at where it all started – and how far we've come.
Ted Forbes of The Art of Photography breaks down five 'hacks' for organizing your camera equipment.
The City of Redding has published a series of aerial images showing the devastation caused by the ongoing Carr Fire in Shasta County, California.
Sigma full-frame Art lenses are finally available in Sony E-mount. Here's how the 85mm F1.4 Art looks on an a7R III and a7 III.
Sigma is now shipping the FE versions of its 14mm F1.8 DG HSM, 70mm F2.8 DG MACRO, and 135mm F1.8 DG HSM Art lenses that were announced in February.
We got some quick hands-on time with Samsung's newest, biggest Galaxy smartphone at the company's launch event. Here are the most noteworthy camera features we uncovered.
Leica has released the Elpro 52, a close-up lens adapter that works 3with more than 20 Leica M and TL lenses.
Nikon has released yet another teaser video for its full-frame mirrorless camera set to be announced August 23rd.
At a high-profile launch event in New York, Samsung took the wraps off its next Note device. The Galaxy Note 9 borrows the S9+'s 12MP dual-aperture dual-cam, with OIS in both cameras and an emphasis on AI-enhanced shooting modes.
One of the most keenly-awaited lenses for a while, the new Pentax D FA* 50mm F1.4 is finally here, and we've been using it for a few days. In this article, we're updating our initial impressions on the basis of our recent shooting with the K-1 II.
AirSelfie2 boasts longer flight times, a higher resolution camera and more built-in memory than its predecessor.
In 2016, Samsung launched a prohibitively expensive 4TB SSD. This week it revealed that it has started mass producing a less expensive variant.
At max speed, the Epson FastFoto FF-680W can scan a photo every second at 300dpi.