Novoflex's new TrioPod PRO75 modular tripod can handle 'immense load'
Novoflex has announced an expansion of its TrioPod tripod product line with the launch of the TrioPod PRO75 model. This is a high-capacity advanced spider tripod, according to Novoflex, which claims that the PRO75 model can be used "for even the heaviest photo and video equipment."
Novoflex explains that its new PRO75 tripod is constructed with 8-layered carbon fiber legs alongside reinforced components. Buyers have a choice between three or four-section carbon fiber legs, as well as a pair of mini legs. The PRO75 model also supports existing TrioPod legs.
|The PRO base by itself will run you over $880 USD.|
The TrioPod PRO75 model can support a maximum load of 65kg / 143lbs and has a total of seven leg lock positions at 23-, 43-, 45-, 65-, 87-, 155-, and 180-degrees. The tripod is made with a high level of versatility in mind, offering support for most 75mm accessories and both 1/4" and 3/8" connections, a removable base plate for using a leveling ball, and a self-locking geared center column.
Of course, all of these capabilities are going to cost you a pretty penny. The TrioPod PRO75 base alone, without legs, costs a whopping $885.28. Add 3-section carbon fibre legs (plus 2 mini legs) to the kit and you're looking at $1,476.64, while a set of 4-section legs by themselves will run you $663.52.
To find out more about the TrioPod PRO75 lineup or order some bits and pieces for yourself, head over to the Novoflex website.
Introducing the NOVOFLEX TrioPod PRO75
The new Modular Tripod of choice for discerning professionals looking for the sturdiest, modular support solution.
For almost four years, the NOVOFLEX TrioPod tripod collection has been lauded as the most innovative tripod system on the market. The Product Innovation Team at NOVOFLEX is proud to announce the expansion of this tripod series with a modular, high-capacity tripod system, the TrioPod PRO75.
Exceptionally stable and modular with immense load capacity.
The basis for the all-new TrioPod PRO75 is the advanced tripod spider, which offers exceptional stability and immense load capacity. Thanks to the reinforced design of the individual components and new 8-layered carbon fiber legs, this modular tripod can be used for even the heaviest photo and video equipment.
The system can be purchased with 3 or 4 section carbon fiber legs plus two mini legs for maximum versatility.
In addition to the recommended new tripod legs C3930 and C3940, existing TrioPod legs can also be used with the new TrioPod PRO75 as well. With the optionally available carbon leg extensions, a total height of 79 in./2.0 m is possible. Short 2-segment carbon fiber legs C2820 are also available allowing you to achieve completely new perspectives and are even compatible with the existing TrioPod and QuadroPod Systems.
Maximum Load Capacity – 143 lbs/65 kg – Maximum holding capacity for maximum protection.
Removable Base Plate – A new feature of the tripod spider is the removable base plate that easily be detached and replaced with the optional leveling ball (MBAL-PRO75) or a geared center column (TRIO-CC-PRO75).
Unmatched Versatility – To build your tripod to meet the needs of any job the PRO75 can fit most 75mm accessories, even from other manufacturers. The optional leveling ball (MBAL-PRO75) can also be used with any other tripod you may have with a ¼” & 3/8” connection.
Self-Locking Geared Center Column – The innovative 3/8” studs on both ends of the geared center column provide an extra measure of security and compatibility by taking the load off the ¼” threads. The column itself can be adjusted by 19 in./48 cm.
7 Leg Lock Positions for Any Situation – For shoots on level surfaces, the TrioPod PRO75 spider allows the legs to be set at 23°, 45°, 65°, and 87°. Should you find yourself in a more confined space, a further locking position of 155° enables you to support the tripod against vertical surfaces. Particularly innovative is a new 43° angle that allows the tripod to flip upside down quickly for ground-level work, eliminating the need to reverse the center column and/or tripod head. For easy packaging, the legs can also be folded up at 180°.
Ground Level Work
The TrioPod PRO75 is available in two kits:
TRIOPROC3930 – consisting of TrioPod PRO75 tripod spider, (3x) C3930 3-segment carbon fiber legs, (2x) A1010 mini-legs, a tripod bag and multi-tool.
TRIOPROC3940 – consisting of TrioPod PRO75 tripod spider, (3x) C3940 4-segment carbon fiber legs, (2x) A1010 mini-legs, a tripod bag and multi-tool.
The two QLEG-A1010 mini-legs that are part of the kits can be screwed into the accessory thread creating limitless possibilities: Add one leg to smooth your workflow by attaching your camera bag, keeping your tripod weighted and giving you quick access to your equipment. Alternatively, replace two legs to create a “leaning pod” and achieve a new variety of creative perspectives for your boundless imagination.
Shares of quantum dot (QD) specialists Nanoco dropped after reports Apple has decided to stop the development of QD image sensors because the technology was too expensive for mass production.
The second-generation portable motion control system adds USB-C, improved connectivity and more.
The patent details an Apple Watch band with integrated cameras so you could capture photos with a flick of the wrist.
At MWC Shanghai the Chinese manufacturer has revealed a device with the feature and provided more information about the technology.
The Loupedeck+ console can now be used alongside Adobe Camera Raw for Photoshop, adding yet another program to its list of supported apps.
Joshua Gross has meticulously rebuilt an old Polaroid SX-70 and turned it into a digital camera with the help of a Raspberry Pi computer, a fisheye lens, a little bit of wiring and a sizable chunk of programming.
The Canon RF 35mm F1.8 IS STM Macro is a lightweight, versatile lens for Canon's new EOS R system. Promising good close focus capabilities and built-in stabilization, is this the perfect lens for EOS R and RP shooters? Find out in our full review.
Metabones has updated the firmware of select Speed Booster and Smart Adapter units to bring frame rates up to 10 fps to Sony a7 III camera systems.
A month after the the U.S. Department of Homeland Security (USDHS) sent out an alert stating that drones manufactured in China presented a security risk, DJI has told a Senate subcommittee that the China-based company doesn't collect flight logs and images to send back to the Chinese government.
Fujifilm has issued an advisory after it discovered counterfeit rolls of film bearing the ‘Fujifilm’ brand have been discovered.
A known Samsung leaker claims Samsung engineers informed him the upcoming Note 10 smartphone will feature a ‘three-stage variable aperture.’
The Strobe attaches to any drone, weighs only ten grams and has power for more than two hours of strobe action.
Phase One's new Creative Control Package update for the IQ4 Infinity Platform brings a new Raw capture mode the averages together multiple frames to yield a higher-quality image.
Bye Bye Camera detects and removes all humans from your pictures but is not meant to be a photo tool.
Polish artist Michal Karcz shared a post explaining that 500px requested he no longer post his content on the platform, as his images are photo manipulations, not photography.
Leica's new M-E (Typ 240) replaces the M-E (Typ 220). It comes with updated features and a smaller price, making it a little less painful on the wallet to hop on the Leica bandwagon.
The Wingo Pro is essentially a polycarbonate wing on a 2-meter string that allows you to control the camera's flight and keeps the subject right at the center.
Samsung's Isocell Bright GW1 sensor has been designed to rival the 48MP Quad-Bayer offerings from Sony.
Archivist Dr. Johnathan Burgess has teamed up with fellow archivist Jason Scott to publish nearly 2,400 images captured by an unknown individual at Ground Zero following the 9/11 attacks on the World Trade Centers in New York City.
Alien Skin Exposure X4 4.5 improves performance, adds the ability to preview images on memory cards before import, assigns metadata while shooting tethered, adds LUT support and editable light effects, and more.
Looking for a new lens for your camera? Our lens buying guides have recommendations for all kinds of situations, so if you have a Canon/Nikon DSLR or Fujifilm/Sony mirrorless camera, have a look.
It's an official rule for drivers at the Combine Demolition Derby in the tiny town of Lind, Washington, to be aggressive or be disqualified. Not a single driver exhibited any such lack of aggression during a day of flying dirt, flying beer cans, twisted metal and screaming cheers.
Dale Sharpe, an Australian storm-chaser, landscape photographer and Nikon Ambassador has passed away after a tragic roadside accident while in the United States.
Summer is here, which means it's time for Chris and Jordan's roundup of new waterproof cameras for 2019: the Olympus Tough TG-6, the Ricoh WG-6, and the Panasonic TS7. Find out which one is right for your next vacation.
The latest version of Hasselblad's CFV digital back and the new super-slim 907X camera body make a beautiful combination – take a closer look.
Cinema5D is black with part two of its documentary series that shares an exclusive behind-the-scenes look at the work Fujifilm has put into developing, engineering and launching its 100-megapixel GFX 100 mirrorless camera system.
The company says it looking into providing ‘new imaging experiences’ with technologies such as artificial intelligence.
The new models are designed to hold DSLRs or larger cameras and long tele lenses.
According to a report from German business newspaper Handelsblatt, Leica is cutting up to 100 jobs from its headquarters and adding up to 40 ’digital experts’ as part of a restructuring plan to help push its smartphone and computational photography technology forward.