Petruska

We don't know yet until a review what kind of auto cleans are going to take place, plus if you don't use the printer enough you may need to perform a manual clean often.  You are looking at about ...

on certain models with their 3rd party service centers. Seeing that Nikon dumped their 3rd party service centers recently this is now meaningless. You can still get grey market service at these ...

The problem is with the D850. Why even discuss the Sigma when the Nikon lens is doing the same thing. https://www.dpreview.com/forums/post/63970488 The OP should have done the 2 button reset by now ...

as the P600 does.  You use approximately 10mL of each color to fill the ink cartridge holder ink channels, the ink suppy lines, the print head dampers , and the print head, plus a few deep cleans ...

on my D700 and have never changed it from day one.  I get great exposures with matrix metering. Bob P.

The cartridges sit on a holder that has the ink channels, the channels are covered by a heat sealed mylar film, the same for the damper plate at the print head. Any moderate pressure can rupture ...

Many times they go for around $100 after rebate, sometimes as low as $49.  This was the cost with the included free paper bundle, free shipping. I see that BHphoto now charges an additional $50 for ...

prints from Epson R3000 match very well for brightness in my room with overhead ceiling light with 2, 100W bulbs.  Match perfectly with my Solux viewing lamps. Now is the OP using incandescent, ...

Making profiles, without a RIP...…………. Bob P.

and, or, the printing software, workflow, printer driver settings, that you are using. What are your printing/computer skill levels? Nothing wrong with your printer. I would be nice to state what ...

as I outlined for you in my post? You should do this as if the DTP20 won't calibrate you are wasting your time going any further.  If the DTP20 doesn't calibrate then your generated ICC profiles ...

I'm printing with an Epson R3000 with OEM K3 Vivid Magenta ink and the canned profiles supplied by paper manufacturers (Epson, Red River, Hahnemuhle, Canson, Museo, etc. match almost exactly the ...

OK, again you may need to be connected through a "powered" USB hub, that is a hub that needs its own power supply plugged in. Older computers had enough USB power, modern current computers don't ...

I answered you in the other thread about setting up the Pulse with Win 10. I have 6 working Xrite Pulse ColorElite DTP20's. They are really great spectrometers for ICC profiling.  I paid about an ...

Just download and install the latest driver from the Xrite site, it's a Windows Vista driver but will work fine with the Pulse on Windows 10. You may need to have a "powered" USB hub as the USB ...

Bob P.

There are some papers that shed small flecks after printing even if the paper cleaned before printing. Bob P.

Are you using OEM cartridges? Watch this link........ https://youtu.be/TYgmiLH-RS0 Bob P.