Neil Schofield

P (partner) 😉 mode for occasional use, my partner has 3 custom settings, BIF, BOAS, and one for small BIF, all based on TV mode, however if I were to let her loose on something simple like a ...

I think that Canon may have a problem in the short term, that is until more new bodies are released, as some folk will shy away from purchasing new glass i would like to consider one of the new ...

Might be a silly point , but have you tried to recalibrate the battery in the charger

You might want to check that the cross head Philips screws that hold the lens mount to the body are tight and not loose, if not then as previous poster said, you may want to contact canon

Another cheap solution you could try is PTFE tape on the thread, it should give it a tighter seal on the thread

Don’t use that particular lens, but with a 400mm L f5.6, and a 400mm DO, I normally attach one to the arca base plate on my camera body, and one to the lens foot For additional piece of mind, I ...

Try shooting same image with all the different metering options, additionally check that you aren’t accidentally asking for over exposure compensation, or shooting manual with inappropriate settings

Up the Pool

Seems like a sensible way forward, you should get the chance to experience both bodies side by side, perhaps you can return to this thread at a later date and share your experiences Good luck

With the 1DX, and depending on the lens used,  I found what you say to match my experience, but not with the 1DX2, which is the body we are taking about

I shoot with a 1DX2, my fiancée shoots with a 7D2, and the only time that the IQ of the 7D2 matches, the 1DX is with large subject in the frame shots in good light

For BIF, I would consider choosing the 1DX 2 body over the 7D2, for the AF performance, the frame rate, significantly better buffer,  higher ISO performance, Not to mention the better IQ when ...

Another two opportunities of supplying a lens with an arca compatible foot have been missed, when will they do this, most folk will either change out the lens foot or stick an arca plate on it

Canon sells A4 paper, A3 paper and printers to match, but it wont add the 1.41 A size crop ratio to DPP4 for reasons known only to its self,  it was available in DPP3, but that's improvement for you ...

Might want to check out the Tenba Solstice 12 L, but it could depend on the size of your second lens

Yes other lenses need updating prior to these two, and new ones such as a 500 f 5.6 IS L ( 400l f 5.6 upgrade) which would stop folk going down the sigma/Tamron route, as every lens these companies...

A couple of other things to try, because if memory serves me right error code 99 is a general code and could be related to camera lens contact, so try cleaning all contacts, and also check the ...

Another heads up for the Sirui L 10, and if you want to use it on your tripod as well, then have a look at the L20, a magic bit of kit in my view, my wimberely rarely gets an outing these days

You already have the Sigmonster, and the Sigzilla, so this could be either the Sigzooka, or Sigbucket

You might want to check out these https://www.mountain-equipment.co.uk/super-alpine-glove Best I have found and can still use BBF for BIF shots, change teleconverters and make coffee, but get a ...