Digital Dick

reboot the computer after installing the new update, connect the usb cable, turn on camera and choose tethered capture, in Skype or Zoom settings choose the Olympus webcam beta from the drop down ...

Same issue with the E-M5 II. Also tried setting the date in the camera back to 2020 but that didn't help. Dick

I have the EM-5 II and have found I can greatly reduce the hiss by going into the Movie custom menu I - PCM Recorder Link and setting the Camera Rec. Volume to Operative. It seems to work even ...

I use either an external Tascam recorder near the feeder or just run a cheap wired lapel mic back to the camera. The lapel mic works the best in bad weather and you don't have to worry about ...

I have the Olympus 90 mm f2 from film days and have used it with excellent results on my E-M5 I and II. Of course it is manual focus only and very heavy and still expensive (used). I do miss the ...

My E-M5 Mark II (and my Mark I) recognize any card (fast or slow) that I have ever try in it. Have no trouble shooting video onto a low speed card. Suggest formatting the card before trying it in ...

I don't have the camera but am very interested in it. To my knowledge I've only seen reports of seven developing the tripod mount issue. A couple of my friends have the camera but both have add a ...

I tested both side by side and I found the same sharpness at 300mm for both and didn't notice any difference in the relative S-AF focusing speeds on both of my E-M5s (I and II). Dick

With my EM-5 II and the interval timer set to 1 sec with either the diamond or the heart shutter, mine takes a frame every 2-2.5 seconds ( my shutter speed was 1/60 sec). Dick

I have a set of the cheap Chinese tube and so far haven't had any metal dust issues. However, I was getting some flare from internal reflections from the smooth interior walls. I spayed a shot of ...

at 215 mm at 300 mm both were shot through a double pane picture window. They're sharp enough for my use. Both handheld. Dick

Need had a problem at 300mm. My 75-300 has a nice lens hood. Don't remember if it came with the lens or if I had to buy it separately. Dick

I have tried all versions of both and have stuck with the 75-300mm Mark I. Use it mostly on my E-M5 Mark I. Dick

John, When using the LM3 off the hot shoe via the cord, does it still act as a trigger to fire other off camera flashes like the FL600r? Dick

I bought a third party version of the Canon cable and it didn't work with my LM3 so be careful. If you do find one that really works please post a link. Thanks, Dick

There is a lot of controversy going around about the use of the sky replacements tools in the latest post processing software. To pull it off successfully you need to match the shadows and ...

You're probably shooting jpeg only. Set the camera to shoot raw+jpeg. Dick

So I just did the comparison of opening a raw in Workspace and exporting it as a tiff and then importing the tiff into LR vs just opening the raw directly into LR. They come into LR with slightly ...

I'm no expert but I think a 16 bit Tiff contains all the data that is in the 16 bit raw file. Workspace doesn't appear to pull as much out of the shadows as LR. I should try opening a raw in ...

I shoot Olympus bodies and don't know anything about a Workspace equivalent for Panasonic. There may have been a Silky-pix version for older Panasonics. I waited years before biting the bullet and ...