panos_m

I have printed in two years 2,200 (two thousand and two hundred) square feet of paper and my measured ink consumption is a little better than 50/50.

This is the reported ink that ends on the paper. You have to take into account also the ink used for maintenance. To be safe I would double that figure.

No it's not. The PRO-1000 cleans itself regularly and fills up maintenance tanks relatively fast.

So instead of buying this: https://www.bhphotovideo.com/c/product/1322137-REG/canon_0545c006aa_pfi_1000_lucia_pro_ink.html you can buy with the same money a new printer which includes the same ink ...

I first searched for the error code and I found this: https://printcopy.info/?l=en&mod=erc&brand=Canon&model=iPF%20PRO%204000&code=EC21%202F51 I have to note that the procedure you followed to ...

As the previous poster suggested, make a custom profile. You can use a remote profiling service for that. Custom profiles I have build for the PRO-1000 are better than the Hahnemuhle profiles and ...

I moved mine to another location with the car.  I put it in the trunk and I drove carefully. I took care to hold it and move it horizontaly with help from a friend.

I read somewhere (I don't remember where) for an experiment of an image shown on a screen (camouflaged with a mat to look like a frame) with softproofing on and the actual print matted and framed ...

Unfortunately this is not the case for the PRO-1000. It is impossible to avoid the cleaning cycles. I print at least every second day (currently every day) and the printer keeps cleaning itself in ...

The names are different. The printhead PF-10 is the same for all. So the ink is the same. The only unknown is the coding in the ink cartridge chip. Maybe there is a restriction to use a PRO-1000 ...

The wider and longest print a PRO-1000 can deliver is 16.73 X 25.18 inches or 42,50 X 63,96 cm.

You can try Canon Photo Paper Plus Semi Gloss SG-201. I believe that is the same paper as the Epson. The only difference is that on the back the Canon says Canon instead of Epson. I printed the ...

I believe that this feature isn't available for the PRO-1000. Only for the bigger roll models.

I believe you can do nothing about it. I print every other day and I change a maintenance tank every 4 months.

The only one like the Permajet paper is Hahnemuhle Photo Rag Satin which is listed under "Glossy Fine Art" but it is printed with MK black. The blacks on it are brownish but it is an interesting ...

No, you are not double profiling.

For anything Z3200 related ask for help in the Luminous Landscape Printing forum: https://forum.luminous-landscape.com/index.php?PHPSESSID=17d2c7f3891b5df16950828695ccdad4&board=6.0

Just a note. Canon PRO-1000 for some paper types (Photo Paper Pro Premium Matte, Heavyweight Fine Art Paper, Extra Heavyweight Fine Art Paper, Canvas) use both blacks PBK,MBK simultaneously. So ...

The S version has 8 inks the non-S 12. For photography go for the non-S with the 12 inks.

In the beginning I didn't want to believe it also. When you first change a maintenance tank (before print anything else) go to the Accounting Software and calculate the total amount of ink went on ...