-
In order to verify that IBIS is working (or not) you might do the following with the RF 50 attached to the camera: - in the Camera menu, tab 7, item "IS (Image Stabilizer) mode", set "Still photo ...
-
Sorry for the typo... I should have written "Aaton Universal mount". See https://www.cinematography.net/edited-pages/LensMount.htm
-
Looking at the three prongs I think it could be a Aaron Universal mount (there are adaptors for mirrorless cameras out there, but these are quite expensive).
-
I'm a bit confused by the description of your mishap - are you saying that you were attempting to clean the focusing (matte) screen (which actually is removable and can be swapped with different ...
-
I have a R5 running on firmware 1.5.2. When AF operation is set to Servo AF and method to Spot AF, and having enabled "lens drive when AF impossible" in the AF menu, I can see a similar hunting if ...
-
The hood included with the RF 70-200/4.0 does not fit on the RF 100-400. For the latter I bought the JJC hood which fits perfectly.
-
It seems that I was confused as well. The green car most likely is a 1948 (1947?) Cadillac Series 62. I mistook the hood ornament for the Chrysler eagle, while it is in fact the Cadillac "flying ...
-
The car sports a Chrysler hood ornament (a stylized eagle) - could be a Chrysler Windsor from 1947 to 1949.
-
The EOS 500D accepts SD and SDHC memory cards only; the maximum capacity of SDHC cards is 32 GB. Also, SDHC cards are formatted using FAT32. Larger than 32 GB SD cards are type SDXC and these are ...
-
Your camera is in fully automatic mode. Switch to (f.i.) P mode and the missing menu items will appear.
-
It seems that the front lens was wiped with a fluid which damaged the lens coating. From Canon's cleaning advice: (1) Do not use your diluted ethanol or isopropyl alcohol to clean image sensors or ...
-
According to Canon support (https://support.usa.canon.com/kb/index?page=content&id=ART177429) the minimum write speed required for 8K RAW is 400 MB/sec or higher. The same requirement is listed ...
-
This is a cool (and obviously very functional) base plate. Which brand is it? I have been looking for something similar (and by the way, I also find that the PD clutch is just about perfect).
-
Firmware 1.5.0 is currently missing also from canon.de and canon.at as well - it was available yesterday when I downloaded it and updated my R5. I did not notice any problems when doing some ...
-
Starting in 2012, Canon released (EF/EF-S) lenses which allow updating their firmware from the camera menu. Caveat: this applies not to all such lenses, and not to all cameras. The EF 70-300mm ...
-
Zoombrowser EX (and also its successor Imagebrowser EX) do not support EOS R5 CR3 files. Canon DPP (Digital Photo Professional) can process CR3 files and is available for current Windows and Mac ...
-
I think that the ACR lens profile for the RF 100-500mm F4.5-7.1works quite well. 400 mm at F11 100 mm at F11
-
This lens creates two circular images side by side on the sensor which then have to be processed massively for the intended VR applications. I guess this means that sufficient visual quality can ...
-
In addition to the RF 16mm/2.8 and RF 100-400mm/5.6-8.0, Adobe has not managed to provide lens profiles for the RF 14-35mm/4.0, the RF 50mm/1.8 and RF 70-200mm/4.0 lenses yet (the two latter ...
-
Hi Jiri, aperture will always be indicated as "00" as the camera has no way of knowing the lens aperture range. With some chipped (EF mount) adapters, any specific aperture value can be programmed ...
Activity older than 12 months is not displayed.
|
Total messages |
107 |
Threads started |
4 |
Last post |
5 days ago |
|