reyalp

A720 supports SDHC (according to the specs https://www.usa.canon.com/internet/portal/us/home/support/details/cameras/support-point-and-shoot/powershot-a-series/powershot-a720-is) and UHS cards are ...

See here: http://chdk.wikia.com/wiki/USB_Remote Aside from building something yourself, it also supports Ricoh CA-1 compatible remotes. See this FAQ ...

I'm not clear if beccles555 was asking about timelapse, but if so, CHDK is available for SX50 and supports timelapse with script. CHDK also supports remote control with a simple DIY remote on the ...

The easiest way is probably to one of the installation utilities STICK (http://zenoshrdlu.com/stick/stick.html) or CHIMP (https://chdk.setepontos.com/index.php?topic=13091.0) Download ...

You should be able do this using CHDK (http://chdk.wikia.com/wiki/CHDK) and and chdkptp (https://www.assembla.com/spaces/chdkptp) on a Windows or Linux PC. Note that chdkptp does not allow you to ...

Totally incorrect. From the article: "As a result, the company will pay $3.2 million as both monetary relief and back wages to more than 1,300 individuals."

No. These cameras do not support HDMI out when in shooting mode, and the USB interface is not capable of acting as a host, only as a PTP device. You can use a CHDK script to start recording a new ...

That explains it then. Your only option to get more time with this camera is to record at lower resolution or frame rate, but even so the manual suggests there is a ~30 minute limit for anything HD.

What size is the file when it stops? According the the manual, "Recording time for Indvidual movies (Approx)" for 1080p60 is 29 minutes 59 seconds. However, it states that "Recording will also ...

Beware that these cameras have quite a bit of camera specific calibration stored in the onboard flash memory. If you manage to successfully replace the main board but aren't able to get the ...

Glad to hear you got it working. I don't recall seeing reports of anything like this before. The startup images on these cameras can be customized, so it's conceivable it got corrupted in flash, ...

If you want to update CHDK on an already prepared card (and aren't using multi-partition), you can just unzip the zip onto it and all your settings should be left intact. You can also generally ...

Glad to help. I'd suspect it's the mac file attribute problem. Do you know what Canon firmware version your "new" cameras have? I think most firmware versions of the G9 are supported, so it's ...

I don't have a G9, but supporting CHDK I've seen most of the problems people have running firmware update files. The firmware update process on all canon P&S in the last 10 years works pretty much ...

I expect this is the problem then. You can confirm this by comparing a camera jpeg of the same shot. I'd suggest using a full featured raw converter that can do lens correction. Raw therapee and ...

What software are you using? What you posted looks normal for a raw on these cameras without any lens correction applied.

Canon doesn't provide the USB shooting features on any modern P&S cameras AFAIK. The G15 does support Canon's RS-60E3 hardware remote. The G15 is also supported by CHDK, which gives you various ...

I suspect this won't help OP who has a G9X mk II. However, a Canon Basic script might be able to get the value. Some cameras that support the ver.req/vers.req trick also show the shoot count, but ...

To be clear, we recommend against trying to run a CHDK build for a different model. There are a few a cases where Canon just re-badged the same internals, but that should be verified with a ...

If you say the firmware information display, you did it right. Regarding the set+display, the way to get this reliably should be hold set, and while it's held down, click display. But if you hold ...