Thor Egil

I do it all the time (A9II). Never had any problems.

You did hit that Date/Time Setup command? It will sync the time to the second.

Yes, clock sync is automatic when you connect the OI.Share app. That is - if you activate it in Settings/Camera Management.

Yes it does. I'm using my A9II in parallell with my OM-D E-M1II and have to do this operation before every concert. The onboard clock in the A9II is drifting off in just a few days.

I haven't tried, but I assume you just have to set the phone to UTC time zone first - and/or maybe the camera.

Mechanical shutter IS better than EFCS in this setting (I've tried) and electronic shutter is completely useless. Stage lighting LEDs are flickering way faster than 50Hz, and the frequency doesn't ...

Here is an example from a concert I shot three weeks ago, with led lights and stage smoke. The banding is clearly visible along the left edge, even though I have done some editing to reduce the ...

A correction. The A9II also suffers from banding with LED lights - even if you are using the mechanical shutter under particular circumstances. LED ligths and stage fog is a very difficult ...

Sony's own Imaging Edge software is free. https://imagingedge.sony.net/en-us/ie-desktop.html

Led light striping can be a serious problem even with full mechanical shutter. Here is an example from a concert I shot last week, with led lights and stage smoke. The banding is clearly visible ...

Led light striping can be a serious problem even with full mechanical shutter. Here is an example from a concert I shot last week, with led lights and stage smoke. The banding is clearly visible ...

It's in the first pages of the manual. Same thing for A9 as well. https://helpguide.sony.net/ilc/1720/v1/en/contents/TP0001653093.html

If you connect in Remote Operation mode you should find it in the settings menu.

You can set the clock from the Imaging Edge mobile app.

The weather sealing is the soft rubber around the cards which is pressing against the frame inside the lid when closed. So I'd say that this damage has no consequences for the weather sealing.

On my A9II (and i believe it is the same on the A7III) you can map "Finder/Monitor Sel." to a button. And you have to set FINDER/MONITOR to Manual. I mapped it to C3 to make it work like my Olympus ...

Canon changed their lens mount too often? The FL mount was introduced back in '64 and was upgraded to the compatible FD mount in '71. This was again replaced by the EF autofocus mount in '87 - ...

Version 7.3.2 was released yesterday. It seems they managed to fix the gps tracking (gps permission problem on Android 10). Apart from that nothing works, just like previous attempt. - Connecting ...

Yes, the A7III use useless in LED lights with electronic shutter due to banding. And the A9II also has problems but not as severe. And yes, mechanical shutter is no magic cure against banding ...

With this you have gained nothing but weight and size. You need to double the ISO with this smaller aperture, and will lose any improvements you might have hoped to gain in the noise department. If ...