Behind the scenes: An interview with the heads of Canon's L lens factory
|From left to right, Mr Hayakawa, Mr Okada and Mr Izuki, the three men in charge of development and keeping things running smoothly at Canon's Utsunomiya lens plant.|
Following the CP+ 2017 show in Japan, we headed to Canon's Utsunomiya lens factory to take a tour (see what we found) and interview the gentlemen who oversee all operations and development. This included Kenichi Izuki, the Plant Manager, Masato Okada, Deputy Chief Executive of Image Communication and Products Operations and Shingo Hayakawa, Deputy Group Executive of Image Communication and Products Operations.
The Utsunomiya plant is where all Canon's L series, cinema, and broadcast lenses are produced. It's also where all Canon lenses are designed. Many of those designs can be attributed to the three men pictured above. In fact just before we started the interview Mr Izuki informed us that he had been lead designer of the EF 35mm F2 IS lens we'd chosen to document the factory tour. So there's also a pretty good chance you have one of them to thank for your favorite Canon glass!
Please note that this interview was conducted through an interpreter, and has been edited slightly for clarity and flow.
|The magic place where all Canon L lenses are born.|
What percentage of L lenses are manufactured in the Utsunomiya lens plant?
Because this is the 'mother' factory, 100% of L lenses are made here.
How many different lenses can be manufactured simultaneously in this plant?
Basically, we create all lenses every day [including L-series EF, Cinema EOS and broadcast]. The only exception is some of the broadcast lenses.
Which lenses in particular are the most difficult to manufacture and why?
Any large super telephoto lenses because of the size of the glass elements. In terms of skill required for lens assembly: the TV broadcast lenses are most difficult.
How many lenses are produced at this lens plant every year, both in terms of types of lenses and total units?
We do not disclose total production for this plant. That said, Canon has produced a total of 120 million lenses over the years. Of course, many of those are kit lenses, which are not produced here, but in our facility in Taiwan.
|Mr Izuki, the plant manager, teaching us about the lens production process.|
Tell us a little bit about the history of the plant.
The facility as a whole has been here for forty years, however prior to 2005, we were located in an older building on the other side of the property. And the land where the current plant sits was initially owned by the Du Pont family. When they returned it to the prefecture, we bought it.
The current lens facility opened in 2005. When we moved in we completely revamped our lens-making machines and devices. Not all, but the majority. This helped to push [us] to a higher standard of quality.
Over the past 40 years, lenses have changed a lot, with autofocus introduced, aspherics, etc., what was the largest paradigm shift in lens technology?
We are reaching the 30th anniversary of the introduction of the EOS line. It was at that time, in 1987, that we moved into autofocus. When we did that, I believe we were the first ones to go fully-electronic mount autofocus. Because the motors were built into the lens we had a significant competitive edge.
As DSLR resolution increases, it can be a challenge to achieve precise focus because AF errors are more noticeable. How do you reduce this risk in the manufacturing and quality control process?
Overall precision is something customers are increasingly requiring. In this factory, we have increased the level of precision of our machines so that lenses have more accurate autofocus.
|A lens going through QC testing. Information from the test will be saved on a chip in the lens.|
During the tour it was mentioned that Canon lenses now store their quality control test data using on-board memory. Can that data be used to improve autofocus reliability?
We do store data from final lens testing on each unit. I won’t be able to speak in greater detail other than saying, yes, in theory, that data could be used to achieve higher autofocus performance [better AF precision] with a DSLR.
How long does it take a lens like the Canon EF 16-35mm f/2.8L III USM to make its way from start to finish in the assembly line?
From raw material being polished, to the final tested product being boxed: about 24 hours of work, in theory. But the physical production would actually take longer. This is because we are producing parts in batches and there are machines that need to be fitted. These variables aside, if you take the actual time of labor, assembly and packaging, it is about 24 hours.
You mentioned you were looking to hit an 80% automation rate in this facility. What kind of efficiency gain does that represent?
It’s difficult to say in terms of time, but I can say it use to take about 70 people to make a lens like that prior to automation, now we need about 6 or 7.
As production becomes more automated will you require fewer skilled manual workers?
In one sense yes. But it’s not about firing the rest of these people, it’s about allowing them the time to build up their skills. This way they can face challenges and difficulties like increasing precision and performance. So we’ve essentially been able to allocate these workers to a different environment.
|A lens in the final assembly process. It can take 25-30 years to become an Assembly Meister at Canon's Utsunomiya plant.|
Typically how long does someone train before they attain the title of 'Meister'?
In terms of the level of 'Lens Meister,' it would take 30-35 years. For 'Assembly Meisters", 25-30 years.
Now that the process for assembly, element polishing and quality control is so automated, we're curious how many lenses pass QC the first time vs those that have to go back for re-calibration.
In terms of maintaining a level of quality before going into mass production, we do a lot of checking and scenario building [using a super computer] to make sure everything will go right. Once a lens goes into mass production we can safely say that we have seen no lenses returned for further calibration.
What impact did the 2011 have on this facility and how long did it take to recover?
A lot of the ceilings came down. We took a big hit in that regard. But, we were able to come back into operation within about 2 to 3 months.
Did you implement any changes as a result of the earthquake?
We have fortified the building, so that it is more earthquake-proof. And the assembly tools we use are put together in such as way that they are shake-proof.
Are there major differences in how you QC test broadcast and cinema lenses vs EF lenses?
The concept for testing is basically the same. But, in terms of broadcast/cinema lenses there are some unique customizations that we offer depending on the particular cameraman or filmmaker. If they want to zoom by hand, for instance, we can accommodate the pressure of the mechanism to their requirements.
A lot of your users use EF lenses for video creation. Has that changed the way you design some EF lenses?
In terms of stills shooter, when it comes to autofocus, the faster the better. On the other hand, videographers tend to require a variance in autofocus speed. Sometimes they want a slow effect. So we had to create a motor that could actually do both fast and slow focus. This is why we introduced Nano-USM. It's in both the 18-135mm F3.5-5.6 IS USM and the 70-300mm F4-5.6 IS II USM.
Will that kind of autofocus be used more in the future as video becomes more of a requirement for users?
At any given time, how many new lenses are in development at this facility?
I can not give you a number, unfortunately. But I can say that new lenses are in development as we speak. So I hope you look forward to them.
|Results of a QC test.|
Editors note (by Dan Bracaglia):
Let me begin by saying how grateful I was to be given access to Canon's lens factory and what an honor and privilege it was to sit down and interview the creators of some of Canon's most legendary glass. In my six and a half years writing about photography, this was one of my most memorable and rewarding experiences.
As you might expect, there were nearly endless points of fascination. Some of which are covered in this interview, others in our factory tour slideshow. Something that particularly interested me is the fact that all the information from a lens' final calibration and quality control check is saved on a chip within the lens itself. The idea here is this information can been used, in theory, when a lens comes back in for cleaning or recalibration. It also means that at some point, perhaps camera bodies will be able to access this information, which could lead to better AF precision. This is solid forward thinking on Canon's part.
I was also intrigued to find that Canon manufactures every L lens in the same factory. Not only that but every current lens in the L series is being made every day. As you might imagine, security at the facility is very tight.
Also hearing Canon put a concrete number on their automation goals (80%) was interesting. Of course you could read that as Canon displacing workers with machines, but throughout the tour and the interview, our guides made it clear that automation wasn't about replacing workers, rather dedicating more workers to research and development. Canon, it seems, recognizes just how important pushing lens development is, all while maintaining a high level of quality control. Automation offers just this.
And I'm not ordinarily one to be starstruck, but when Mr. Izuki told me he designed the Canon EF 35mm F2 IS, my jaw dropped a little. There's nothing quite like standing of front of the creator of one of your favorite lenses. Speaking of favorites, we also asked Mr. Hayakawa, Mr Okada and Mr Izuki which Canon lens they've designed/worked on over the years they are most proud of. We got some great answers. We'll be posting those in a separate article soon, so stay tuned!
|Barney, just prior to entering the factory floor. We also went through a room that blasted us with air. Dust is the enemy in a lens factory.|
Nikon has posted teaser number five for its full-frame mirrorless system being announced in just three days. In this one, early users of the camera share their first impressions, and there's also a quick glimpse of an F-mount adapter.
It's not just the Seattle team celebrating ten years since the announcement of the first mirrorless system. Chris and Jordan have also been looking back at the camera that started it all: the Panasonic Lumix DMC G1.
On a hot and hazy afternoon, DPR staffer Carey Rose took the Panasonic Lumix GX9 and Lumix G Vario 35-100mm F2.8 lens to a neighborhood music festival to gather some impressions of the autofocus system. Here's what he found.
The European Imaging and Sound Association has announced the winners of its 2018-19 awards, with Sony doing particularly well and coming away with five of the eighteen prizes.
When it was introduced earlier this year, Google's new cloud storage service wasn't available to new customers. Now, anyone in the US can sign up for a Google One plan, starting at $2/month for 100GB of storage.
DJI has launched a new video teasing its upcoming launch event. The August 23 date is more than a month later than the original July 18 event date given by DJI back in June.
A veteran wildlife photographer and typically a Nikon shooter, Aaron Baggenstos took the Sony a9 on a recent trip to the Alaskan Wilderness. Find out his impressions of the camera and see some of the incredible images he was able to capture.
Parent company Longsys has announced that Lexar will be back "in full production" and shipping globally this fall.
Owners of V-mount Hasselblad lenses will now be able to use their modern and historic glass on the front of the Hasselblad X1D. The XV adapter hinted at late last year has now been officially announced and will cost €199 / $249 / £179.
Scottish whisky producer Macallen has teamed up with photographic cooperative Magnum Photos to create a single malt whisky in collaboration with Steve McCurry, Martin Parr, Paolo Pellegrin, Mark Power, Gueorgui Pinkhassov and Alec Soth.
The photography competition seeks "pictures that show the importance of health in society and the impact health issues have on people and communities worldwide."
Nikon has posted another teaser video for its upcoming full-frame mirrorless system featuring some classic Nikkor lenses. Perhaps the most notable thing about the video is the lens that's shown first...
Following the CES 2017 announcement of its revival, Kodak Alaris has started shipping test rolls of its new Ektachrome to photographers for beta testing.
Take an inside look at the work that goes into testing Nikon cameras from drops, dust, water and debris. There were definitely cameras harmed in the making of this video.
In a press release issued this morning, Sony announced it has sold more full-frame cameras than any other brand in the US over the past six months, measured both by units sold and by value.
Yuneec has introduced the Mantis Q, a consumer drone with an integrated 4K camera, electronic image stabilization and voice control.
The new 3 Legged Thing Patti is a compact tripod that doesn't break the bank.
Alex and Kathryn are photographers, friends and Tokyo residents who love exploring Japan's hidden cultural treasures. They each brought a Canon EOS M50 on a recent trip starting in bustling Tokyo and ending in the peaceful riverside town of Gujo Hachiman.
The triple-camera in Samsung's 2019 Galaxy S10 smartphone is expected to use three sensors with varying pixel counts.
Net SE, the parent company behind the likes of Oprema Jena, Meyer Optik Görlitz, Emil Busch, C.P. Goerz, Ihagee and A. Schacht products has filed for bankruptcy and removed itself from the German stock exchange.
Canon's latest 70-200mm F4L comes with a five stops of image stabilization, a new coat of paint and impressive sharpness. We've been shooting with our copy for several weeks now - see how it stacks up in our sample gallery.
Special 4K and 6K Photo modes may be one of the most under-appreciated features on recent cameras. In this week's episode, Chris and Jordan take a closer look at these modes and explain why – and when – you'll be glad to have them on your camera.
Ten years ago this month Panasonic and Olympus announced a new concept called Micro Four Thirds. We're now on the brink of full-frame mirrorless from at least one major player, so perhaps it's a good time to take a look back at where it all started – and how far we've come.
Ted Forbes of The Art of Photography breaks down five 'hacks' for organizing your camera equipment.
The City of Redding has published a series of aerial images showing the devastation caused by the ongoing Carr Fire in Shasta County, California.
Sigma full-frame Art lenses are finally available in Sony E-mount. Here's how the 85mm F1.4 Art looks on an a7R III and a7 III.
Sigma is now shipping the FE versions of its 14mm F1.8 DG HSM, 70mm F2.8 DG MACRO, and 135mm F1.8 DG HSM Art lenses that were announced in February.
We got some quick hands-on time with Samsung's newest, biggest Galaxy smartphone at the company's launch event. Here are the most noteworthy camera features we uncovered.