Behind the scenes: An interview with the heads of Canon's L lens factory
|From left to right, Mr Hayakawa, Mr Okada and Mr Izuki, the three men in charge of development and keeping things running smoothly at Canon's Utsunomiya lens plant.|
Following the CP+ 2017 show in Japan, we headed to Canon's Utsunomiya lens factory to take a tour (see what we found) and interview the gentlemen who oversee all operations and development. This included Kenichi Izuki, the Plant Manager, Masato Okada, Deputy Chief Executive of Image Communication and Products Operations and Shingo Hayakawa, Deputy Group Executive of Image Communication and Products Operations.
The Utsunomiya plant is where all Canon's L series, cinema, and broadcast lenses are produced. It's also where all Canon lenses are designed. Many of those designs can be attributed to the three men pictured above. In fact just before we started the interview Mr Izuki informed us that he had been lead designer of the EF 35mm F2 IS lens we'd chosen to document the factory tour. So there's also a pretty good chance you have one of them to thank for your favorite Canon glass!
Please note that this interview was conducted through an interpreter, and has been edited slightly for clarity and flow.
|The magic place where all Canon L lenses are born.|
What percentage of L lenses are manufactured in the Utsunomiya lens plant?
Because this is the 'mother' factory, 100% of L lenses are made here.
How many different lenses can be manufactured simultaneously in this plant?
Basically, we create all lenses every day [including L-series EF, Cinema EOS and broadcast]. The only exception is some of the broadcast lenses.
Which lenses in particular are the most difficult to manufacture and why?
Any large super telephoto lenses because of the size of the glass elements. In terms of skill required for lens assembly: the TV broadcast lenses are most difficult.
How many lenses are produced at this lens plant every year, both in terms of types of lenses and total units?
We do not disclose total production for this plant. That said, Canon has produced a total of 120 million lenses over the years. Of course, many of those are kit lenses, which are not produced here, but in our facility in Taiwan.
|Mr Izuki, the plant manager, teaching us about the lens production process.|
Tell us a little bit about the history of the plant.
The facility as a whole has been here for forty years, however prior to 2005, we were located in an older building on the other side of the property. And the land where the current plant sits was initially owned by the Du Pont family. When they returned it to the prefecture, we bought it.
The current lens facility opened in 2005. When we moved in we completely revamped our lens-making machines and devices. Not all, but the majority. This helped to push [us] to a higher standard of quality.
Over the past 40 years, lenses have changed a lot, with autofocus introduced, aspherics, etc., what was the largest paradigm shift in lens technology?
We are reaching the 30th anniversary of the introduction of the EOS line. It was at that time, in 1987, that we moved into autofocus. When we did that, I believe we were the first ones to go fully-electronic mount autofocus. Because the motors were built into the lens we had a significant competitive edge.
As DSLR resolution increases, it can be a challenge to achieve precise focus because AF errors are more noticeable. How do you reduce this risk in the manufacturing and quality control process?
Overall precision is something customers are increasingly requiring. In this factory, we have increased the level of precision of our machines so that lenses have more accurate autofocus.
|A lens going through QC testing. Information from the test will be saved on a chip in the lens.|
During the tour it was mentioned that Canon lenses now store their quality control test data using on-board memory. Can that data be used to improve autofocus reliability?
We do store data from final lens testing on each unit. I won’t be able to speak in greater detail other than saying, yes, in theory, that data could be used to achieve higher autofocus performance [better AF precision] with a DSLR.
How long does it take a lens like the Canon EF 16-35mm f/2.8L III USM to make its way from start to finish in the assembly line?
From raw material being polished, to the final tested product being boxed: about 24 hours of work, in theory. But the physical production would actually take longer. This is because we are producing parts in batches and there are machines that need to be fitted. These variables aside, if you take the actual time of labor, assembly and packaging, it is about 24 hours.
You mentioned you were looking to hit an 80% automation rate in this facility. What kind of efficiency gain does that represent?
It’s difficult to say in terms of time, but I can say it use to take about 70 people to make a lens like that prior to automation, now we need about 6 or 7.
As production becomes more automated will you require fewer skilled manual workers?
In one sense yes. But it’s not about firing the rest of these people, it’s about allowing them the time to build up their skills. This way they can face challenges and difficulties like increasing precision and performance. So we’ve essentially been able to allocate these workers to a different environment.
|A lens in the final assembly process. It can take 25-30 years to become an Assembly Meister at Canon's Utsunomiya plant.|
Typically how long does someone train before they attain the title of 'Meister'?
In terms of the level of 'Lens Meister,' it would take 30-35 years. For 'Assembly Meisters", 25-30 years.
Now that the process for assembly, element polishing and quality control is so automated, we're curious how many lenses pass QC the first time vs those that have to go back for re-calibration.
In terms of maintaining a level of quality before going into mass production, we do a lot of checking and scenario building [using a super computer] to make sure everything will go right. Once a lens goes into mass production we can safely say that we have seen no lenses returned for further calibration.
What impact did the 2011 have on this facility and how long did it take to recover?
A lot of the ceilings came down. We took a big hit in that regard. But, we were able to come back into operation within about 2 to 3 months.
Did you implement any changes as a result of the earthquake?
We have fortified the building, so that it is more earthquake-proof. And the assembly tools we use are put together in such as way that they are shake-proof.
Are there major differences in how you QC test broadcast and cinema lenses vs EF lenses?
The concept for testing is basically the same. But, in terms of broadcast/cinema lenses there are some unique customizations that we offer depending on the particular cameraman or filmmaker. If they want to zoom by hand, for instance, we can accommodate the pressure of the mechanism to their requirements.
A lot of your users use EF lenses for video creation. Has that changed the way you design some EF lenses?
In terms of stills shooter, when it comes to autofocus, the faster the better. On the other hand, videographers tend to require a variance in autofocus speed. Sometimes they want a slow effect. So we had to create a motor that could actually do both fast and slow focus. This is why we introduced Nano-USM. It's in both the 18-135mm F3.5-5.6 IS USM and the 70-300mm F4-5.6 IS II USM.
Will that kind of autofocus be used more in the future as video becomes more of a requirement for users?
At any given time, how many new lenses are in development at this facility?
I can not give you a number, unfortunately. But I can say that new lenses are in development as we speak. So I hope you look forward to them.
|Results of a QC test.|
Editors note (by Dan Bracaglia):
Let me begin by saying how grateful I was to be given access to Canon's lens factory and what an honor and privilege it was to sit down and interview the creators of some of Canon's most legendary glass. In my six and a half years writing about photography, this was one of my most memorable and rewarding experiences.
As you might expect, there were nearly endless points of fascination. Some of which are covered in this interview, others in our factory tour slideshow. Something that particularly interested me is the fact that all the information from a lens' final calibration and quality control check is saved on a chip within the lens itself. The idea here is this information can been used, in theory, when a lens comes back in for cleaning or recalibration. It also means that at some point, perhaps camera bodies will be able to access this information, which could lead to better AF precision. This is solid forward thinking on Canon's part.
I was also intrigued to find that Canon manufactures every L lens in the same factory. Not only that but every current lens in the L series is being made every day. As you might imagine, security at the facility is very tight.
Also hearing Canon put a concrete number on their automation goals (80%) was interesting. Of course you could read that as Canon displacing workers with machines, but throughout the tour and the interview, our guides made it clear that automation wasn't about replacing workers, rather dedicating more workers to research and development. Canon, it seems, recognizes just how important pushing lens development is, all while maintaining a high level of quality control. Automation offers just this.
And I'm not ordinarily one to be starstruck, but when Mr. Izuki told me he designed the Canon EF 35mm F2 IS, my jaw dropped a little. There's nothing quite like standing of front of the creator of one of your favorite lenses. Speaking of favorites, we also asked Mr. Hayakawa, Mr Okada and Mr Izuki which Canon lens they've designed/worked on over the years they are most proud of. We got some great answers. We'll be posting those in a separate article soon, so stay tuned!
|Barney, just prior to entering the factory floor. We also went through a room that blasted us with air. Dust is the enemy in a lens factory.|
We've already posted lots of images from the Sony a7 III launch event, but now we've had plenty of time with the camera around our home base in Seattle. Check out our updated gallery to see the cherry blossoms at the University of Washington, historic coastal lighthouses and more.
GoPro has inked a multi-year licensing deal with manufacturing services company Jabil that will allow Jabil to incorporate GoPro sensor modules and camera lenses into third-party products.
It's not just fashion magazines. It seems some major Instagram accounts with tens or hundreds of thousands of followers are pitching photographers, offering to feature their work... for a fee.
Canon Rumors has reportedly "confirmed from a couple of good sources" that Canon's full-frame mirrorless camera is currently being tested in the field by select Canon pro photographers.
In a ‘the world’s gone crazy’ role-reversal Sheeba magazine's submission guidelines specifyl that photographers lucky enough to have an image selected for the cover will have to pay $860 for the privilege of having it used.
A Russian drone pilot took his little camera drone to an altitude of 10 kilometers (~33,000 feet), and while the flight didn't break any local regulations and was done in a remote region, it's still an incredibly reckless and stupid thing to try.
Zach Sutton over at Lensrentals has put together this very useful on-location lighting tutorial for beginners, complete with five sample lighting setups to experiment with as you get more comfortable using artificial light.
Instagram has revealed some interesting updates this week, including a return to a slightly more chronological newsfeed where "newer posts are more likely to appear first in feed."
The 10 Open category winners revealed this week will duke it out for $5,000 in prize money and the title of Open Photographer of the Year. The winner will be revealed on April 19th, alongside the Professional category winners.
The new Laowa 9mm F2.8 Zero-D is "the world’s widest rectilinear f/2.8 lens for mirrorless APS-C cameras." It boasts a 113° angle of view, fast F2.8 aperture, and a Zero-D design that promises "close to zero" distortion.
YouTuber Devin Graham recently got to do something very few of us will ever get to: he purchased and unboxed nearly a quarter million dollars worth of cinema lenses.
We're looking for a Software Development Engineer to join our Seattle-based team. Bring your creativity, passion and talent to help us build the next generation of our web and mobile experiences.
If you're on a budget and looking to get into Fujifilm's X-system, the X-A5 is likely on your radar. We've been out shooting with this updated entry-level camera.
A report from the National Endowment for the Arts shows that photography and photo-finishing services contributed $10.2 billion to the US economy in 2015.
According to unnamed sources, Google will acquire Lytro's technology and patents, with Lytro employees already having left the company.
Our review of the Sony a7 III is well underway and, as part of this, we're publishing our studio test scene. We'll be building out the review in the coming weeks as we test and shoot the camera in a series of situations.
The new ExaDrive offers a three times higher capacity than the previous largest SSD, a 30TB model by Samsung.
A pair of images show what may be the upcoming DJI Phantom 5 drone featuring an interchangeable lens camera. Update: Comparing this image to the size of previous DJI lens mounts, and noting the 3:2 aspect ratio of the sensor, we're confident the leaked image shows a 1"-type sensor
We were saddened to hear of the death last week of Chuck Westfall, a 35-year veteran of Canon USA, and a legend in the photography industry.
Nikon looks to be positioning its D850 as a serious video rig with today's announcement of its D850 Filmmaker's Kit. The kit includes the body, 20/35/85mm F1.8G lenses, an Atomos Ninja Flame external recorder, two microphones and an extra battery.
Photographers shopping around for Lightroom alternatives have likely encountered Alien Skin's Exposure X3. Here's an overview of its organization and editing controls, and how they differ from the competition.
Alien Skin has released a significant update for its Exposure X3 image editor, adding greater precision to adjustment tools and more printing capabilities, among other improvements.
The FAA has ordered helicopter pilots and operators to halt certain doors-off flights in the wake of a tragedy that killed five passengers.
Analysts TechInsights have torn down a Samsung Galaxy S9 Plus to have a closer look at the device's internal components and their cost.
Oppo's new high-end phones bear an uncanny resemblance to the iPhone X, with features like face unlock to a portrait lighting mode.
Recently we visited the 2018 CP+ show in Yokohama, Japan and as usual, we booked interviews with senior executives from several major manufacturers, including Sigma.
At this year's CP+ show in Yokohama, we sat down with senior executives from several major manufacturers, including Canon. Topics of conversation included Canon's ambitions for high-end mirrorless cameras, and the importance of responding to the demands of the smartphone generation.
We were recently able to follow local frame builder Max Kullaway as he created one of his AirLandSea bikes. Here are our picks of the photos we got, as the project progressed from bare tubes all the way to rideable bicycle.
On paper, the Sony a7 III is a tempting option for photographers who've been considering a switch to full-frame mirrorless. But how does its image quality stack up? We compare it to the Mark II and a few of its other peers.
Erez Marom shares the details behind this beautiful aurora photograph, captured on Haukland Beach in the Lofoten Islands, Arctic Norway, on a moonless evening.