Need help on flash Unit

Gmac11

New member
Messages
4
Reaction score
0
Location
US
I have a S602 and would like to put on a external Flash, which one will work on my camera and which one works best?
Thanks
 
If you don't mind the cost, Nikon SB80DX is one of the best flash out there tha support automatic modes.

Other popular flashes (you could do a quick searc) are Sunpak Super 383, Metz 32Z1, Vivitar 285HV, etc.
I have a S602 and would like to put on a external Flash, which one
will work on my camera and which one works best?
Thanks
--

Check out some fashion shots I have taken: http://mpenza.clubsnap.org/view_album.php?set_albumName=fashion
 
Hi, there.

According to the Fuji manual, the flash must be triggered by the camera and the aperture and ISO must be set manually. The trigger voltage of the flash unit should be low to be safe, but the Fuji manual never explicitly state what is acceptable. Some people say below 24V, while others say 400V. The lower, the better is the general rule. Fuji UK reports 5-15V, yet the Fuji S602Z Pro manual states 400V. The Vivitar 283, Sunpak 383 Super, Sunpak 144 PC Auto, Metz 32Z, and Nikon Speedlight SB-24 (in non-TTL mode) are commonly used with the S602Z. One recommendation is to set a custom white balance when using external flash. This web site lists quite a few manufacturers of flashes with their trigger voltages. Remember: the lower, the safer!voltages: http://www.botzilla.com/photo/strobeVolts.html

Please check the thread: Helpful sites for new s602 owner:
http://forums.dpreview.com/forums/read.asp?forum=1012&message=5680004

Good luck!
I have a S602 and would like to put on a external Flash, which one
will work on my camera and which one works best?
Thanks
--
FP 2600, S602.
http://www.pbase.com/janus75060
Visit the unofficial S602 FAQ site: http://www.marius.org/fuji602faq.php
 

Keyboard shortcuts

Back
Top