Example of fitting a Peak Design Capture v3 to thick backpack strap

Started Jun 6, 2018 | Discussions
noirdesir Forum Pro • Posts: 13,748
Example of fitting a Peak Design Capture v3 to thick backpack strap

Backpack strap is about 65 x 16 mm, while the width between the two lugs on the Capture clip is only 56 mm. You can fit it in by simply squeezing the strap along its width. I've used the Allen key screws because they are a bit longer. As you can see further below, they are long enough such that they can be screwed in far enough such that their end is flush with the bottom of the Capture clip.

Nikon 1 V3
If you believe there are incorrect tags, please send us this post using our feedback form.
Merowech New Member • Posts: 23
Re: Example of fitting a Peak Design Capture v3 to thick backpack strap

Thank you!

Keyboard shortcuts:
FForum MMy threads