About the remote-IR time limit

Started Jul 19, 2004 | Discussions thread
Mark Roberts Contributing Member • Posts: 628

There are 4 buttons on the case...

One is for shutter release... easy enough.

Two are for zoom, which is not supported via the IR, so they will likely be configured to simply turn the DigiSnap off.

The last is for time-lapse control. If you press and hold the button for more than about 2 seconds, the LED will start to blink, once per second. Keep holding it for two blinks (two more seconds) then release, and you have configured it for a 2 second time-lapse! Press the time-lapse button again (quick press & release), and it will start the time-lapse process. Press again when you want it to stop.
Harbortronics... home of the DigiSnap!

 Mark Roberts's gear list:Mark Roberts's gear list
Canon EOS 5D Mark III
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow