DPReview.com is closing April 10th - Find out more

Damage to Canon EF 50 mm f/1.4 USM

Started Apr 30, 2022 | Questions thread
ZX11
ZX11 Veteran Member • Posts: 6,156
Re: Damage to Canon EF 50 mm f/1.4 USM

msowsun wrote:

Ray UK wrote:

What happens when the 1.4 is damaged, is as follows:

As the front assembly rotates during focusing it relies on small lugs which run in sloping grooves of plastic tube affixed to the main body. This plastic tube is quite flimsy and any pressure on the front can cause this to be damaged by the lugs.

If the damage is only slight then focusing will still work but the lugs will cause an indentation in the grooves so the focus will tend to stick in this position, this can usually be felt when using manual focus

If the lens has sustained greater damage then the plastic tube will be broken and the front section will not turn at all, so neither AF or MF will work.

Damage caused by pressure on the front of the lens will not affect the lens sharpness unless of course if the lens is unable to focus.

This is the part that is easily damaged by pressure on the front filter threads.

Thanks guys.  I always thought it was the cheap motor and its gears that would strip out.  Mine has the Canon hood always on and is stored on its side or mount.  Works fine so far.

-- hide signature --

"Very funny, Scotty! Now beam me down my clothes."
"He's dead, Jim! You grab his tri-corder. I'll get his wallet."

 ZX11's gear list:ZX11's gear list
Canon EF 85mm F1.8 USM Canon 70-200 F2.8L III Canon RF 35mm F1.8 IS STM Macro Canon RF 24-105mm F4L IS USM Canon RF 85mm F1.2L USM
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow