Saturation settings (general) and Exposure Compensation X-S10

Niki_T wrote:

Sorry, should be Bulgarian (from Bulgaria / Bulgarie, the lost country in Europe). And, yes, Your answer was really helpfull. After the firmware update all settings are available now (X-E3 and X-E4). In the german manual they talk about color intensity instead of saturation, so when You search the PDF-file, this will not come up (Sättigung is the german word for saturation). No idea what they call it in french.
Unfortunately the X-S10 seems to have a hardware failure, the back dial just stops working after 3 to 5 minutes. Will send the body back monday and ask for a replace.
But.... also related to the X-S10, because You seem to be familiar with this body (or maybe anyone else here)....
I have (yet) only one lens, the 18-55 (other lenses are incoming), that came as a set with the X-E3. OIS works on the lens on the E3 and E4. Also on the S-10, BUT.... when I switch off the lens-IS, the is no in-body IS. And yes, it is activated in the settings, according to the manual. I see in the finder (even if lens-IS is activated) the shaky-hand-symbol crossed out. So here I am a little bit uncertain - is it due to an error of the hardware ("dead" back dial) or is it to be expected. It simply does not make sense, I would like to switch between in-body IS and lens-IS, as offered by Olympus, when used with Panasonic IS-lenses.
Thank You

I would wait until you get your replacement camera before worrying about anything else as your original one could be defective in other areas. Your English is very good, so don't worry about that, they say it's a difficult language to learn, l'm not sure about that, l was speaking it at 18 months 😉