Color/Luminosity separation

Started 3 months ago | Discussions thread
Pictus
Pictus Veteran Member • Posts: 6,543
Re: Color/Luminosity separation

Tom Axford wrote:

Unfortunately, the problem is more fundamental than that and changing the colour space doesn't solve it.

It occurs because mathematically Lab colour has a much larger gamut than RGB.

Are you sure?
http://www.brucelindbloom.com/index.html?WorkingSpaceInfo.html

However, the difference is not because some colours in Lab cannot be represented in RGB. Instead, it is because Lab can represent saturated colours on a much wider brightness scale than is possible in RGB (whatever RGB colour space is used).

From https://www.dpreview.com/forums/post/55571367
"Keep in mind that CIELab was just an attempt to create a perceptually uniform color space where equal steps correlated to equal color closeness based on the perception of a viewer. The CIE didn't claim it was prefect (because its not). Most color scientists will point out that Lab exaggerates the distance in yellows and consequently underestimate the distances in blues. Lab assumes that hue and chroma can be treated separately. There's an issue where hue lines bend with increase in saturation perceived by viewers as an increase in both saturation and a change in hue when that's really not supposed to be happening. Further, according to Karl Lang, there is a bug in the definition of the Lab color space. If you are dealing with a very saturated blue that's outside the gamut of say a printer, when one uses a perceptual rendering intent, the CMM preserves the hue angle and reduces the saturation in an attempt to make a less saturated blue within this gamut. The result is mathematically the same hue as the original, but the results end up appearing purple to the viewer. This is unfortunately accentuated with blues, causing a shift towards magenta. Keep in mind that the Lab color model was invented way back in 1976, long before anyone had thoughts about digital color management."

Anyway, in Photoshop by staying in 16 bits+RGB color mode+ProPhoto RGB  color space when doing this https://www.modelmayhem.com/forums/post/894058/2#post18305720 to separate color/luminosity, I see no loss of colors.

Post (hide subjects) Posted by
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow