Fungus (?) inside RF 70-200 F4 L

Started 1 month ago | Discussions thread
OP Sinawang Forum Member • Posts: 65
Re: Fungus (?) inside RF 70-200 F4 L

Karl_Guttag wrote:

Please, don't get stress out. It is not that bad (yet).

First, ALL lenses have dust in them, and they will get more dust with time, even the best L lenses in the world. You can't have lenses that move in and out and seal against all dust. Also, note that waterproof is not the same as vapor proof. No lens is mold spore proof as mold spores are very tiny.

The good news is that if the dust and other imperfections are not near the sensor, they will not appear in the image. Note that even if the dust spot is on the sensor filter (just before the sensor), you can't see them until you stop down, generally to f16 or smaller. I don't think it happens today, but back when Canon used to say that a few bubbles in the glass were "normal" even for L lenses and would not degrade the image quality.

To a first approximation, all parts of the lens contribute to all parts of the image. So even if that mold spot were a black dot, you probably would not notice it even if you shot a picture of a white object. All the spot does is dim the whole image by the percentage of the light that is blocked (which is probably much less than 1%).

For a very simple but dramatic and simple example, see this video at the point linked to here: https://youtu.be/acmDxmEAiDM?t=489.

Is the point you trying to show me in that video is at the 8:35 time mark?

Also, it appears that this is occurring on the outer part of the lens, which primarily contributes to the image only at the wider apertures so that it will be even more out of focus/invisible if it has any effect at all.

It is kind of like you scratched the outside of the lens. It does not make you feel good, but it is not hurting the image significantly. Take some pictures of a white sheet of paper or some other uniform white object at various apertures and see if you can see it.

That said, since you live in a humid climate, you don't want it to get worse. You could get a nasty surprise someday when you put a lens out that you have not used for a long time. Also, mold can eat at the lens coatings and not be reversible via cleaning. You definitely want to take precautions regarding Humidity and UV light to kill/control the mold.

Even if you were to kill all the mold in the lens today, you would get more tomorrow. All lenses have microscopic mold spores in them. If they get water vapor, then they will grow. You have to keep the humidity down and kill them with UV (sunlight counts) light.

Thanks. Lesson learnt!

 Sinawang's gear list:Sinawang's gear list
Canon EF 16-35mm F4L IS USM Canon 85mm F1.4L IS USM Canon RF 50mm F1.8 STM Canon RF 70-200 F4 L +1 more
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow