Cleaning a Nikon Z Series Sensor ...Urgent!

Started 1 month ago | Discussions thread
Ceistinne Senior Member • Posts: 2,359
Re: Cleaning a Nikon Z Series Sensor ...Urgent!
3

J Pritchard wrote:

You must be very careful cleaning a Nikon Z camera sensor as its attached to a 5 Axis Gimbal … and it's about powering down. To do this make sure the camera is switched off then take out the battery, then hold the shutter down for at least 10 seconds to bleed off any electrical current. this then parks the Sensor/Gimbal. and now you can clean the sensor and it won't move around and be damaged! The sensor is also easier to then clean on a Z camera. Hope this assist you from damaging your camera.

J Pritchard,

Is there a Manual cleaning setting in the menu. If so use that to keep the sensor IBIS solid while cleaning.  Use a bulb blower to blow off any loose dust wet clean using Photographic Solutions Eclipse and Type 3 swabs.

S

 Ceistinne's gear list:Ceistinne's gear list
Sigma SD1 Merrill Sigma dp2 Quattro Sigma SD9 Sigma SD10 Sigma SD14 +5 more
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow