Best protective clear filters for new Canon Rf Lenses?

JerryBez

Member
Messages
18
Reaction score
3
Greetings. I’m planning on upgrading to some RF lenses when my R5 arrives. I plan on using clear protective filters, as I have in the past. The one I’ve selected is the B + W XS-Pro Clear MRC Nano. I haven’t kept up with current offerings in this category, and wanted to know what are amongst the best to consider.
Thank you in advance.
 
Solution
You will trigger the filter versus no filter debate, as you see here. And while I am firmly in the filter camp, I respect the position of the no filter folks, as they have very valid points to make. At the end of the day, less glass to go through is always a better approach when considering things from just an optical point of view. But being a potential klutz, I have always considered the extra piece of mind of a quality multi-coated clear filter from a reputable manufacturer to be worth whatever minor (and to me not discernible) degradation in my results. And I don't like the hassle of a lens hood unless I am shooting in conditions that warrant its use.

So that said, I have another vote for Breakhrough filters, but I have also used...
Greetings. I’m planning on upgrading to some RF lenses when my R5 arrives. I plan on using clear protective filters, as I have in the past. The one I’ve selected is the B + W XS-Pro Clear MRC Nano. I haven’t kept up with current offerings in this category, and wanted to know what are amongst the best to consider.
Thank you in advance.
Those are the ones I always use, definitely one of the best if not the best out there.
 
Breakthrough Photography have been my go to filters on all my RF lenses. Excellent craftsmanship, great customer service and great warranty.
 
I suggest simply using your hood instead of putting a $50 piece of glass in front of your lens. I’ve been doing that my entire career and never scratched a lens. With a hood in place it’s very difficult to accidentally scratch something.
Also, even the expensive (B+W etc) filters can cause flare.
Just my opinion.
Cheers.
 
Last edited:
You will trigger the filter versus no filter debate, as you see here. And while I am firmly in the filter camp, I respect the position of the no filter folks, as they have very valid points to make. At the end of the day, less glass to go through is always a better approach when considering things from just an optical point of view. But being a potential klutz, I have always considered the extra piece of mind of a quality multi-coated clear filter from a reputable manufacturer to be worth whatever minor (and to me not discernible) degradation in my results. And I don't like the hassle of a lens hood unless I am shooting in conditions that warrant its use.

So that said, I have another vote for Breakhrough filters, but I have also used the best quality from B&W and Hoya with excellent results too. I consider those 3 brands to all be top notch. - I would not think you could go wrong with the highest quality offerings from any of them.

ML
 
Solution
I've been a B+W and Hoya fan for over 20 years. Their PRO level models will provide superb results. The B+W does however cause a bit of a color shift with their CP's. Otherwise they are good. Hoya's are a tad easier to clean. Heliopan is a superb choice but man do they cost! The Hoya Digital Pro models are big bucks but indeed are wonderful.
 

Keyboard shortcuts

Back
Top