furniture flash photography problem with reflections ? Example with photo.

Started 3 months ago | Discussions thread
geru Senior Member • Posts: 1,052
Re: furniture flash photography problem with reflections ? Example with photo.

I assume when you refer to using flash it is speedlights?

Your settings are allowing quite a lot of ambient light into the scene which is a major part of the WB problem.

Set the WB to flash or even better use Kelvin if your camera is equipped with that as an option.

To cut the ambient raise your shutter speed to the camera's sync speed and then adjust the aperture to rid the scene of the ambient light ( for example TV - 200 and Av- F/10 or shut down even more) The EVF or the monitor should be black or nearly black. Shoot the speedlights in manual and adjust the power of the flash to get proper lighting. Of course you could just turn off the lights to achieve the same results.

Why the light modifyers? All their doing is robbing you of at least a stop of light . Mount the flashes on a stand and bounce of a wall or ceiling if that can't be done use a whiteboard or the white or silver disk from a 5 in 1 reflector set and bounce the flash off of those.

It may be that you're going to have to use more powerful lights. If that were the case I'd rent before purchasing unless of course you're going to be doing something like this on a permanent basis.

 geru's gear list:geru's gear list
Canon EF 85mm F1.8 USM Canon EF-S 10-18mm F4.5–5.6 IS STM Canon EOS M50 Canon EF 24mm f/2.8 Canon EF 40mm f/2.8 STM +4 more
Post (hide subjects) Posted by
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow