DPReview.com is closing April 10th - Find out more

Konica C35 EFP flange distance?????

Started Apr 20, 2020 | Questions thread
E Dinkla Senior Member • Posts: 2,613
Re: Konica C35 EFP flange distance?????

ProfHankD wrote:

E Dinkla wrote:

Tom Axford wrote:

If you are pulling the camera to pieces anyway, it should be fairly easy to measure the flange distance yourself.

+1

+1 again. There is NO FLANGE. The lens is an integral part of the body, so where the flange ends up is a function of how you slice it....

Measuring from the film plane to the rim that holds the rear element is quite easy. Set the lens to infinity and use a piece of glass or metal on the frame window near center and subtract its thickness of the measurement you get. It's not a flange film distance as there is no "flange" in that sense in a compact 135 camera. Conversion design should allow some tweaking for infinity calibration.

I suspect it's too short for tilt/shift on MFT, but maybe not?

On MFT it will be hard for tilt/shift I estimate, too short distance from the lens rear to the sensor to suit the MFT register distance of 19.25mm. Probably at most 5mm to fit a shift/tilt mechanism. The lens is sort of a Tessar design, fixed focus, aperture probably primitive as well as it is linked to two ISO settings.  Fixed 1/125 sec shutter time. No real exposure measuring but a low light warning.

http://camera-wiki.org/wiki/Konica_C35_EFP

It seems Andy Warhol was fond of a sister camera model, that usually says enough for me about the technical aspects.

Met vriendelijke groet, Ernst
No photographer's gear list is complete without the printer mentioned !

Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow