Another case of the E-M5iii tripod mount failing

Started 4 days ago | Discussions thread
Impulses Veteran Member • Posts: 6,440
Re: Another case of the E-M5iii tripod mount failing

cba_melbourne wrote:

Impulses wrote:

cba_melbourne wrote:

whumber wrote:

Impulses wrote:

It's always seemed odd to me that Oly continues to push the tripod socket so close to the front edge of the body tho.

Yeah, I've never understood that either.

There is a reason for that though.

The greatest mechanical strength, is deigned to be between the lens mount and the sensor assembly. Any flex in this area would cause optical problems. The sensor plane needs to be perfectly aligned and orthogonal to the lens axis. You do not want focus to change with camera flex, you do not want centering issues. So this area is made strong and stiff and usually with metal.

The tripod mount anchoring is a highly stressed point, and it makes very much sense to solidly anchor this to the strongest part of the camera, which is this frame formed between sensor and lens mount.

On a DSLR this point is further back, because DSLR's have a larger rigid chassis formed by the mirror box between sensor and lens mount. Mirrorless cameras do not have this mirror box chassis.

Now, if a mirrorless camea is made with front and rear covers of metal, both the lens mount and the sensor assembly are screwed directly onto to the metal front cover. The front and rear cover are folded over and joined at the bottom. And the tripod mount can be attached a little further back at the bottom and is still rigidly attached to solid metal.

If the camera is made with front and rear covers of plastic, the tripod mount must be attached to the very small metal area formed by the sensor assembly and the lens mount, and will necessarily end up further forward. Depending on design, this may still not be as strong, particularly when the folded over portions of the front and rear plastic covers are sandwiched between the metal tripod mount and the metal sensor assy/lens mount, as appears to be the case with the EM5.3.

Hope it makes sense, its hard to put into words... just got up and need a coffee now...

Makes a lot of sense, but why did they only start doing so relatively recently then? The original E-M5 had the tripod socket near the center of the bottom plate of the camera (front to back, I think it actually wasn't centered under the lens which is a different sort of silly)... Then it started shifting forward with the mk II, PEN-F, etc.

The original EM5 had a full magnesium chassis. That gives the designer freedom where to attach the socket, as the whole bottom is metal.

So did the E-M5 Mk II and the PEN-F (no?) when they started shifting it to the extreme edge tho, and Pana had it dead center on a lot of plastic fantastic G & GF bodies...

 Impulses's gear list:Impulses's gear list
Panasonic GX850 Olympus E-M5 III Panasonic 20mm F1.7 II Panasonic Lumix G 42.5mm F1.7 Panasonic 8-18mm F2.8-4 +31 more
Post (hide subjects) Posted by
NCV
NCV
NCV
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow