Adusting the exposure when video recording on the Panasonic G7 camera

alcelc wrote:

Brisn5757 wrote:

hindesite wrote:

uncle dunc wrote:

I don't think the G7 has auto ISO, (if it does, I haven't found it)

Of course the G7 has auto ISO. It even has it in M mode for stills.

However the OP is correct in that in video M mode, there is no AutoISO, so the work around is to not use M mode, as you suggest. But AutoISO is also available when you use P, A, or M modes for video, which might be a big help in some situations.

Hi hindesite.

Where exactly is the auto ISO option when I'm in the M mode for video, I'd like to find it in the camera settings. Can you guide me please.

Brian

On G85 and GX85 I do the following:

• Select M-video on Mode Dial,
• Tap the icon of M-Video on the upper left corner of LCD to select S in case you are not in M-Video S mode,
• Set shutter speed to 180 degree rule through the dial (I use the front dial),
• IIRC hit Up cursor to enter ISO menu, select Auto ISO.

Use either the shutter or the red REC button to start video shooting. If the screen looks too dark or bright for certain period of time (usually a second or so and the camera cannot adjust by itself), use Exposure Compensation.

I suppose G7 should be the same.

Thanks for the info alcelc.

I've been setting the top dial to the video mode and setting the camera to m-video in the cameras menu so maybe that's why I did not get the auto ISO setting.

I'll try your setting shortly thanks. I'm not certain what the 180 degree setting rule is for setting the shutter speed. I was told the shutter speed should be double the frame rate (which is 25 or 50 fps in my case).

Brian