K-1 mII, TT350p, wireless manual mode with another TT350p

Hello JCDoss

JCDoss wrote:

KPM2 wrote:

Hello JCDoss

I don't have this flashes, but Massao posted a link to the manual.

Point 8 in the manual: You use the group A, but can it be that you must use on the master flash the mode button until you set the slave to on ? In the group A,B and C you can set on the master the slaves to on/off. Now point 8 describe the multi flash use, but maybe your point 7 use have also such an on off setting for your slave via the master

Best regards. KPM2

Hi, KPM2. Sorry for the delay, I don't check this forum very often.

I did see that Massao posted the manual, and I already had a copy that I reviewed before posting.

I'm not sure I understood your comments.

Point 8 is for MULTI flash, or strobe, and it actually works fine in that mode.

Point 7 is for Manual wireless flash, and following those instructions I can't get it to work.

I am still waiting on a reply from Godox.

I did finally try optical mode (slave flash triggered by main on-camera flash, not radio signal), and that works just fine. So I suppose the problem is solved, but I'd rather have a fully functioning set of flashes.

The TT350 is a fantastic flash even without wireless. Recycle times are very fast, the unit is versatile and provides good power for indoor and close-up work, and is pocketable. I highly recommend the flash, esp at the price point, even though I'm having trouble with mine.

I thought that, when you are in the wireless mode but the flashs in it's manual mode, you can still set via the groups the settings on your slave flash at the main flash, like for example that you can set on the main flash the slave flash to off or on, like the manual described it....but only at point 8 for the MULTI flash use.

Maybe it is a software bug, because using the test button seems to work as you wrote.

best regards  KPM2