DPReview.com is closing April 10th - Find out more

DIY Stack and Stitch System

Started Nov 26, 2018 | Discussions thread
mawyatt2002
OP mawyatt2002 Contributing Member • Posts: 502
Re: DIY Stack and Stitch System

A few updates directly from "Mike's Labs" from over at Macro site.

https://www.dpreview.com/forums/thread/4342793

Also see from PM site.

http://www.photomacrography.net/forum/viewtopic.php?t=39396

http://www.photomacrography.net/forum/viewtopic.php?t=39756

http://www.photomacrography.net/forum/viewtopic.php?t=39755

The above video demos showing the effects of mitigating motor/rail movement induced vibration has been extended to an effective magnification of 800X!

https://drive.google.com/file/d/19wE-B-dMesEXNtEZ552h_VnpWOjA0n0B/view?usp=sharing

The Raspberry Pi based multi-axis Stack and Stitch Controllers have also been expanded and custom Printed Circuit Boards designed and fabricated (a few are still available for select DIYers). These include those listed, and in addition high current, voltage and speed stepper motor controllers have been developed for expanding Focus Stacking and Stack and Strict efforts. All these controllers are designed to allow multiple parameter optimization for various motors/rails and setups, even including the development of a Hall Effect Sensor PCB for viewing the Sine and Cosine motor currents for improved motor/rail performance. These systems include programmable camera and strobe optical isolated trigger outputs.

The Trinamic 5130 based controller (used with Pololu Tic-500 in some 3 axis systems) has been extensively tested and evaluated with many flavors of motors & rails, WeMacro, Stackshot, MJKZZ, THK KR15 with NEMA 11, THK KR20 with NEMA 17, HIWIN KK50 with NEMA 17 for example. Other systems are in evaluation and all are working well.

Best,

TMC5130 Based 3 Axis Controller using Tic-500 for X and Y and TMC5130 for Z (1.4A rms at 12~16V)

View: original size

Quad Axis Controller with 4 independent motor controller outputs (0.76A rms at 12~16V)

View: original size

Another view of Quad Axis Controller

View: original size

Assembly of various controllers at "Mike's Labs"

View: original size

High Motor Current (2.8A rms) and Voltage (12~24V) Controller with discrete MOS FET devices

View: original size

High Current (3.5A rms) and Voltage (12~24V) Controller

View: original size

Dual Axis Controller with driver PCB removed (0.76A rms at 12~16V)

View: original size

Triple Axis Controller (1.4 & 0.76A rms at 12~16V)

View: original size

With Driver PCB removed

View: original size

Dual Channel Hall Effect Stepper Motor Current Probe PCB

View: original size

Sine and Cosine Motor Currents TMC5130 controller NEMA 17 with KR20 Rail under movement (Scale 1A/div)

View: original size

Sine and Cosine Motor Currents for TMC5130 based controller with NEMA 17 motor (Scale 1A/div)

View: original size

Best,

-- hide signature --

Research is like a treasure hunt, you don't know where to look or what you'll find!
~Mike

Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow