DPReview.com is closing April 10th - Find out more

Looking for ideas to build a continuous AF performance testing rig..

Started Jan 15, 2019 | Discussions thread
OP (unknown member) Forum Member • Posts: 81
Re: Looking for ideas to build a continuous AF performance testing rig..

ProfHankD wrote:

Kapil Kapre wrote:

2) Have a servo motor to mechanically move the platform at varying speeds/accelerations with ways to start/stop and control the movement precisely. Ideally I'd like to be able to move the platform at around 20-30 meters/second at peak. I was looking at a few DIY CNC rigs that have similar components, but I don't think they need this kind of speed.

Normally, they're doing something like 200mm/s, which is 1/100 what you want. However, 100X is easy to do with a larger diameter connection to the drive belt. Catch is, it will not deal with much weight that way.

Also keep in mind, acceleration is the really big problem, not speed.

There are much beefier steppers and servos if you need to move significant mass.

Yeah, I found a few pre-made rigs that could work, like this one - https://www.ebay.com/itm/163058384667

But the motor doesn't seem to be precise enough from what I could tell. Also, if I just look at the sensor focal plane, and see what 30m/s of subject movement corresponds to, I either need a precise motor that can move fast over a smaller distance (closer focus) , say 2-5m, or a standard motor that can move fast over a larger distance (far focus).

I have dealt with servos at work before, but I don't really know how to go about choosing one, relative merits of belt/screw/gear/rack and pinion, etc so any help is greatly appreciated!

Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow