X20 52mm filter thread?

Started Jan 8, 2013 | Discussions thread
Snapsh0t
Snapsh0t Senior Member • Posts: 1,817
Re: The new LHF-X20 kit (filter/hood/cap)...

As CMCM says, it's definitely 43mm and my Fuji hood screws in about 2.25 turns. However, my 43mm w/a hood from eBay only screws in about 1.5 turns and the Raynox is less than one turn. If you look at the filter you'll see there's an inner ring and the matching hood goes down between that and the threaded outer ring but anything else may not. The Raynox, in particular, bottoms out early because the rear element is flush with the back of the mount.

 Snapsh0t's gear list:Snapsh0t's gear list
Sony Cyber-shot DSC-RX10 Fujifilm X30
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow