DPReview.com is closing April 10th - Find out more

What is the problem with my NX300 output?

Started Nov 18, 2017 | Discussions thread
blightyear New Member • Posts: 10
Re: What is the problem with my NX300 output?
1

Hard to say without a photo.

depending on your description I would not think on a dirty sensor.

Cleaning is easy, be careful and clean the sensor front glass plate (the real sensor is capsulated) with q-tips and white sidolin (german brand window cleaner without alcohol).

Take care not to touch the shutter which is direct in front of the sensor anyway.

I did this many times without problem.

There should also be also a menue action for sensor cleaning, try both.

If this doesnt work, open the camera and check wether the cmos sensor flex cable is slightly out of the mainboard connector.  Open it and deconnect/ connect it once again

An orientation to open the cam can be found on ifixit.com.

My tip: quiet with a lot of time, the right working tools and without any force to anything you cannot destroy anything which is not defect now

In the case the things above does not work you should think about defect on sensor or motherboard.

Swapping that with a dead cam from ebay or sell your cam to ebay and buy a new one.

Just My opinion

best regards

buzz

Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow