DPReview.com is closing April 10th - Find out more

D800 with KitKat- Issue There is no MTP device connected.

Started Oct 28, 2014 | Discussions thread
Willy79
Willy79 Veteran Member • Posts: 9,806
Michel Sauvage: Camera Is Set To Mass Storage - External SD

I am not sure if we are on the same page or not but if we are here is what I do:

Important: For transferring files Camera Is Set To "Mass Storage" not "MTP".

1) Connect OTG cable to Tab S and USB to camera.

2) Turn camera on.

3) File manager on Tab S opens.

4) I Navigate to USBDrive A > DCIM > 100SDCF (my RAW files are here).

5) Click on RAW files in 100SDCF (press on file for a selection box and check for each file).

6) After the files have been selected, click on icon at the top to "Paste Here".

7) I then navigate to SD Card > DCIM > Camera and then click above on “Paste Here”.

8) The files are then Pasted to SD Card > DCIM > Camera.

Hope this helps.

Michel Sauvage wrote:

Hi

Sorry for the late i was off ...

Nevertheless i tried with an OTB USB 3.0 this type of cable (here ). This time is worst, no message nothing happens on the Tab !

I tried also to change the type of card inside the D800, no effect.

@William, thank you for your reply, but i am looking for a simple solution with cable to copy files from my d800 to my tab.

Thank you, i continue to test ...

Regards

-- hide signature --

A99, A900, A55, A700, R1, w/Zeiss + Sony G Glass, Samsung Galaxy Note III, PS CS6
My Picasa Albums: https://plus.google.com/u/0/photos/109849611643818398019/albums My YouTube: http://www.youtube.com/TheWillybug

 Willy79's gear list:Willy79's gear list
Sony a6500 Sony a7C
Keyboard shortcuts:
FForum PPrevious NNext WNext unread UUpvote SSubscribe RReply QQuote BBookmark MMy threads
Color scheme? Blue / Yellow